watsonsRX8

I just recently had an aftermerket cd player installed. The aftermarket stereo installation kit doesn't have a plug for the ac/heater postion display read out. My wife is upset cause she wants it to work. Does anyone know what can be done or if a plug is made to take care of this issue? Any help would be appreciated!

tronicj

https://www.rx8club.com/series-i-interior-audio-electronics-24/audio-headunit-frequently-asked-questions-have-question-look-here-first-226065/

First Post After "Head Units" there are three listed!

watsonsRX8

After looking at the link, Im not sure if your talking about the harnesses. I got a installation kit with all the harnesses. At this point im not sure if the one needed was missing from the kit or installation guy didnt do somethinhlg right. Hummmmm. Not sure where to look or what to do at this point. Any direction or answers in how I should figure out what to do would be helpful if anyone knows anything. Thanks for your replies with this!

tronicj

This Is the Unit I have...

http://www.metraonline.com/files/pro...NST95-7510.pdf

If you just get the wire harness and the face plate, the HVAC will not work. The Axxess Box on Page 6 is the New display box, and HVAC control.

Who installed your head Unit? Also where are you, Maybe someone Local could help?

watsonsRX8

A guy who has been doing installitions for about 15 years now. Im in Millington, tn just north of Memphis,tn.