Reverse Camera
Does anyone know of a good reverse camera that will fit in our key hole?
|
1 Attachment(s)
I looked into one but finally went with the camera from Matt. I mounted it above the plate. It has a wide view angle and unless you are looking for it you won't notice it's there. The problem I saw with the keyhole was that there would have to be some serious modification to the tail light to get the camera flush with the surface. Otherwise it would be like viewing down a long tunnel.
|
His is too expensive for me. How are you viewing the image?
|
It displays on the Nav screen. The video switch autodisplays the camera picture when in reverse or you can select it and view it on the camera's channel.
|
Do you have the AV box?
|
From the picture, it looks like someone could easily unscrew the camera off. Or is it bolted from inside?
Originally Posted by TheDosDog
I looked into one but finally went with the camera from Matt. I mounted it above the plate. It has a wide view angle and unless you are looking for it you won't notice it's there. The problem I saw with the keyhole was that there would have to be some serious modification to the tail light to get the camera flush with the surface. Otherwise it would be like viewing down a long tunnel.
|
Originally Posted by Rotary Rasp
Do you have the AV box?
Originally Posted by hotpot
From the picture, it looks like someone could easily unscrew the camera off. Or is it bolted from inside?
|
The new Honda Odyssey has a back up camera that is neatly tucked under the square hole where the lisense plate light normally aims down. It is compact and like you guys have said, unless you are looking for it, you won't notice it.
|
Originally Posted by TheDosDog
Yes, I've got the setup from Mazdapartscom.
|
Originally Posted by Nemesis8
Does the camera come with the AV Switcher box? Or did you have to buy it separate?
|
So, is there one that will work?
|
How about this one?
http://cgi.ebay.com/ws/eBayISAPI.dll...771206659&rd=1 |
Did it say "Inside Mounted" ??
|
"Mounted Inside will fit into most vehicle key holes - no other installation needed"
|
Originally Posted by Rotary Rasp
"Mounted Inside will fit into most vehicle key holes - no other installation needed"
I'm working on a DIY right now for the backup cam I installed...I did it without cutting. drilling, or damaging a single piece of the car :D...I'm also adding in pictures and instructions for mounting it in two locations...with ease (the second location may require a little bit of drilling but is much harder to see) I'll try to get the DIY finished sat or sunday...things are CRAZY around here |
I know you guys didn't think it could be done.
https://www.rx8club.com/series-i-do-yourself-forum-73/diy-trunk-keyhole-camera-installed-62547/ ;) |
sorry i no i am late to this post but i just bought my rx8. im trying to install a wireless reversing camera but am having trouble locating the positive 12v wire on the reverse light. On my car i got two wires on a clip coming out the reverse light and they are both purple which is why i do not know wich is the positive. Could some1 help please.
|
a front camera would come in handy for lowered cars
|
I'm not in need for a front camera, just the reverse one
|
All times are GMT -5. The time now is 01:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands