Reverse Camera
#2
Recovered Modaholic
I looked into one but finally went with the camera from Matt. I mounted it above the plate. It has a wide view angle and unless you are looking for it you won't notice it's there. The problem I saw with the keyhole was that there would have to be some serious modification to the tail light to get the camera flush with the surface. Otherwise it would be like viewing down a long tunnel.
#6
Registered
Join Date: Oct 2003
Location: Tropical Island, Indian Ocean
Posts: 573
Likes: 0
Received 0 Likes
on
0 Posts
From the picture, it looks like someone could easily unscrew the camera off. Or is it bolted from inside?
Originally Posted by TheDosDog
I looked into one but finally went with the camera from Matt. I mounted it above the plate. It has a wide view angle and unless you are looking for it you won't notice it's there. The problem I saw with the keyhole was that there would have to be some serious modification to the tail light to get the camera flush with the surface. Otherwise it would be like viewing down a long tunnel.
#7
Recovered Modaholic
Originally Posted by Rotary Rasp
Do you have the AV box?
Originally Posted by hotpot
From the picture, it looks like someone could easily unscrew the camera off. Or is it bolted from inside?
#8
Rotary eXperimental-8
Join Date: Nov 2003
Location: Gander, Newfoundland, Canada
Posts: 1,830
Likes: 0
Received 0 Likes
on
0 Posts
The new Honda Odyssey has a back up camera that is neatly tucked under the square hole where the lisense plate light normally aims down. It is compact and like you guys have said, unless you are looking for it, you won't notice it.
#12
503wtq Boosted Bimmer
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: Los Angeles, California
Posts: 3,038
Likes: 0
Received 0 Likes
on
0 Posts
How about this one?
http://cgi.ebay.com/ws/eBayISAPI.dll...771206659&rd=1
http://cgi.ebay.com/ws/eBayISAPI.dll...771206659&rd=1
#15
Originally Posted by Rotary Rasp
"Mounted Inside will fit into most vehicle key holes - no other installation needed"
I'm working on a DIY right now for the backup cam I installed...I did it without cutting. drilling, or damaging a single piece of the car :D...I'm also adding in pictures and instructions for mounting it in two locations...with ease (the second location may require a little bit of drilling but is much harder to see)
I'll try to get the DIY finished sat or sunday...things are CRAZY around here
#16
503wtq Boosted Bimmer
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: Los Angeles, California
Posts: 3,038
Likes: 0
Received 0 Likes
on
0 Posts
I know you guys didn't think it could be done.
https://www.rx8club.com/series-i-do-yourself-forum-73/diy-trunk-keyhole-camera-installed-62547/
https://www.rx8club.com/series-i-do-yourself-forum-73/diy-trunk-keyhole-camera-installed-62547/
#17
sorry i no i am late to this post but i just bought my rx8. im trying to install a wireless reversing camera but am having trouble locating the positive 12v wire on the reverse light. On my car i got two wires on a clip coming out the reverse light and they are both purple which is why i do not know wich is the positive. Could some1 help please.
Thread
Thread Starter
Forum
Replies
Last Post
nivong
Europe For Sale/Wanted
0
09-02-2015 07:54 AM
MolecularConcept
New Member Forum
2
08-01-2015 03:15 PM