Radar detector wiring help
#1
IRC Founder
Thread Starter
Join Date: May 2008
Location: Jacksonville Beach, FL
Posts: 842
Likes: 0
Received 0 Likes
on
0 Posts
Radar detector wiring help
hey guys my problem is i have a cobra radar detector (i know, not the best) and a monster ipod hookup and both require the cigarette lighter but i only have 1. is there an easy'ish way to hardwire either of these 2 devices or maybe both?
#2
space reserved for shirt
Join Date: Aug 2007
Location: Pasadena,ca for school SD for home
Posts: 668
Likes: 0
Received 1 Like
on
1 Post
i beleive there a way to hook up the radar detector to your top console (where your map lights are).
but i for one have no experiance with radar detectors. :/.
but i think there i DIY on here for it.
but i for one have no experiance with radar detectors. :/.
but i think there i DIY on here for it.
#5
Zoom Zoom....
Risky Business.
This isn't talked about very often, but I have a 5 minute DIY for hardwiring a radar detector / navi / whatever. Cost is less than $10.
1. buy a "mini add-a fuse" from an auto parts store.
2. plug the add a fuse into position #1 in the fuse panel on the driver's side footwell. There is a bolt for ground just above the fuse panel, behind the lower plastic.
3. place the original 15A fuse into the add a fuse, and use a 1A fuse (comes with the add a fuse) for the new circuit.
4. wire the detector. Place wire under the rubber moulding up to the white plastic "A" pillar cover; under the pillar cover, and under the front of the headliner to where you want the detector. (I have my detector just to the (driver's) right of the rearview mirror - the pass. sunvisor still works).
5. Done. The wire is completely hidden.
6. Removal in future would take about 60 seconds.
My Valentine One uses regular telephone wire as it's power cable. A dollar store has 10' sections with plugs on each end.
Or, you can follow any of the DIY's where you can remove the sunglass holder / map lights and tap those wires....
This isn't talked about very often, but I have a 5 minute DIY for hardwiring a radar detector / navi / whatever. Cost is less than $10.
1. buy a "mini add-a fuse" from an auto parts store.
2. plug the add a fuse into position #1 in the fuse panel on the driver's side footwell. There is a bolt for ground just above the fuse panel, behind the lower plastic.
3. place the original 15A fuse into the add a fuse, and use a 1A fuse (comes with the add a fuse) for the new circuit.
4. wire the detector. Place wire under the rubber moulding up to the white plastic "A" pillar cover; under the pillar cover, and under the front of the headliner to where you want the detector. (I have my detector just to the (driver's) right of the rearview mirror - the pass. sunvisor still works).
5. Done. The wire is completely hidden.
6. Removal in future would take about 60 seconds.
My Valentine One uses regular telephone wire as it's power cable. A dollar store has 10' sections with plugs on each end.
Or, you can follow any of the DIY's where you can remove the sunglass holder / map lights and tap those wires....
Last edited by Silver06; 12-10-2008 at 10:49 AM. Reason: IMG tags aren't working... ???
#6
Administrator
iTrader: (7)
#9
Administrator
iTrader: (7)
where is your RD mounted?
Thread
Thread Starter
Forum
Replies
Last Post
Danield97
Series I Trouble Shooting
1
09-30-2015 05:59 PM
Learners_Permit
Series I Interior, Audio, and Electronics
8
09-27-2015 07:38 PM