No power to audio equipment
#1
Registered
Thread Starter
Join Date: Feb 2009
Location: London
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
No power to audio equipment
Ok, so basically, I have no power going to any of my audio equipment. I drove my car to work on Wednesday morning, everything was all good, Wednesday night, I start my car, and my deck doesn't turn on. I go to my trunk to check my amps, and neither of them have turned on either.
My system includes:
metra kit
pioneer deck
4 aftermarket speakers (fronts are alpine type r, rears are rockford fosgates)
kenwood 4 channel amp for speakers
jbl mono amp powering 12" jbl sub, with capacitor.
I have checked every fuse in the kick panel and under the hood. All were good
I checked both inline fuses on my power wires to my amps. Both were good.
I checked the fuse on my Kenwood amp, and the 2 on my JBL amp. All 3 were good.
I pulled my deck, checked the fuse on the back of it, and all the connections. Again, all are good.
I went and bought a new 4 channel amp thinking mine finally died after 6 years, still no change.
I went and bought a new pioneer deck, thinking maybe it finally died after 5 years, as it was acting funny. Still nothing works.
However, when I installed my new deck a few minutes ago, I blew the power locks fuse in the kick panel. I don`t know if that has anything to do with it though.
I have been running this system for just over 18 months now with ZERO problems.
If anyone has any ideas, please let me know. Thanks in advance.
My system includes:
metra kit
pioneer deck
4 aftermarket speakers (fronts are alpine type r, rears are rockford fosgates)
kenwood 4 channel amp for speakers
jbl mono amp powering 12" jbl sub, with capacitor.
I have checked every fuse in the kick panel and under the hood. All were good
I checked both inline fuses on my power wires to my amps. Both were good.
I checked the fuse on my Kenwood amp, and the 2 on my JBL amp. All 3 were good.
I pulled my deck, checked the fuse on the back of it, and all the connections. Again, all are good.
I went and bought a new 4 channel amp thinking mine finally died after 6 years, still no change.
I went and bought a new pioneer deck, thinking maybe it finally died after 5 years, as it was acting funny. Still nothing works.
However, when I installed my new deck a few minutes ago, I blew the power locks fuse in the kick panel. I don`t know if that has anything to do with it though.
I have been running this system for just over 18 months now with ZERO problems.
If anyone has any ideas, please let me know. Thanks in advance.
#2
Registered
Thread Starter
Join Date: Feb 2009
Location: London
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
problem fixed! I have no idea how or why, but it`s all working again. After I replaced the door lock fuse (which had been good, and my locks have been working this entire time) I plugged my new deck back in, BAM, sound! Took out my new amp, and put my old one back in, and BAM, still sound! So everything is working, and I`m very happy.
I`m going to return my amp, but keep the new deck. My old one was starting to die anyways.
I`m going to return my amp, but keep the new deck. My old one was starting to die anyways.
Thread
Thread Starter
Forum
Replies
Last Post