looks bad ass, my build is still a long long time away :(
|
Now that I'm seeing all the stuff you have going, I'm going to put a video up this weekend, I think!
Man, carputers. So good, amirite? |
Another update... Flooded the car after stalling it reversing out of the garage. Used jumper cables to try and restart, but the crappy cables burnt out after about .0001 of a second...result...car battery completely flat...which makes doing the interior electronics a bit hard to complete. Charging the battery via a home charger over the next few days, then deflooding with new plugs on Monday...hopefully shouldn't set me back any further.
All the wiring is complete and in the car, and most of the trim has been put back in. Just the NAV hood and the radio (and ashtray) to be reinstalled....which has to wait until I can test everything before bolting it all back in... sigh. |
Everything in and set up, all working a treat, except the motion of the Nav Hood...accidentally damaged the calibrator when I pulled it out....but no biggie. Just make sure everything is disconnected BEFORE you try to take it out of the car.
Car had been sitting dead after it was flooded, so here is a quick video of the de-flood... http://www.youtube.com/watch?v=tZVVGOr8jRo |
Hey bud im about to get started on my carputer install adn could do with a couple tips.
1-I want GPS what receiver did you use. 2-I am planning on installing cams front and rear for tracking and il plumb them directly into the PC but what camera did you use. 3-ODB module what did you use and what software. 4-Im not sure you have this but you may know but I want my iPhone to work with it all but I want it to function as a handsfree kit any ideas. Im sorry if you covered any of this in your thread but its heavy going reading it all as you have documented alot. |
Update.... JOB completed!! It's taken a while because I haven't had a day off between Feb 2011 and December 23rd 2011... but the Xmas break gave me the time to knuckle down and finish the install. Tested and working = Check. Tunes loaded onto Hard Drive = Check! Taking the car out for a spin on the motorway now (9:30pm) and a cruise around town, so happy!
Will post video & photos shortly, including a run down of the whole build. I notice my photos have disappeared from the rest of the thread, changed hosting company, will post again with all the relevant ones soon too. Cheers to everyone that helped, or just chipped in with their 2 cents worth! Dean |
Waiting on those pics/video. The old picture links crapped out, so I'm excited to see this. If I can get my hands on another mini I might try this out for myself.
|
Sadly (but joyfully) , I have to swap my fully working and awesome carputer set up for a baby seat (;-)
So its for sale... a complete working Mac Mini Car Puter for your '8. Message me if interested with an offer, will also put up a message in the classified section... Package comes with: MAZDA OEM NAV Dash with Lilliput Installed (Including Remote) Nav Dash Control Box (For Illumination and motor controls) and Cables OBD II USB Interface Box and cables Carnetix Power Supply and Mac Mini Connection Kit Garmin GPS Receiver (USB) Reversing Camera (Complete High Stop Light Mod) Optional: Mac Mini OS X and Windows installed Palmer Performance Dash Command (With GTR Skin Included) Centrafuse (with custom RX8 Skin I built) Garmin Mobile PC. This set up is completely tested and working, and I love it, but the new addition tot he family means it has to go. Cheers Deano |
Thoughts on iPad integration?
|
Originally Posted by azzuro
(Post 4298089)
Thoughts on iPad integration?
The SIZE. iPad is just too big to be practical...it's hard to get it fit anywhere safe, Maybe if the rumours are true, Apple will be releasing a 7inch iPad shorty...now THAT would work well... |
I've jest been re-reading my entire build, all the effort and money spent on getting it right, trying different things...hooking up mac power etc etc...
If only Samsung Tab 7" or iPad minis were out back then, life would have been soooooo much easier. Fingers crossed an iPad Mini of the right sort of size comes out early November, then I can just run Dash Command, Tom Tom and my music on the ipads touch screen.....sigh. |
could be late October, actually. I believe Apple has a reveal date of 10/26
|
Originally Posted by ShellDude
(Post 4370943)
could be late October, actually. I believe Apple has a reveal date of 10/26
I just hope the dimensions of the final product fit in the nav hood... |
Actually I was confusing the apple, m$, and Google announcement dates.
Apple is today. |
Crap! The iPad Mini dimensions fit perfectly into the Nav hood widthwise (200mm) and depthwise...but height is gonna be a problem (134mm).... To top it off, the home button on the ipad would be hidden, which kinda makes the hardware useless...
I will keep investigating. Pity, as it has everything a person would need, including Assisted GPS. |
Contact switch relay question.
Originally Posted by deanrx8
(Post 2873005)
Ok, quick photo post...
Here are a few pics of the build... there are some of the mechanism to get the screen to switch off when the hood is in the 'down' position. Basically, when the hood is down, the contacts touch, completing the circuit, powering a relay, which switches the monitor off. The hood has some little flanges/stoppers which suit this purpose brilliantly. A bit of hot glue to hold everything in place, and voila! Works a treat. Press open, and the screen comes on. http://www.deanknowsley.com/hood1.jpg Here is a screen test, hooking up a mac to the screen.... http://www.deanknowsley.com/hood2.jpg Lilliput in the Nav Hood http://www.deanknowsley.com/hood3.jpg The lower part of the Nav Hood, external, with wire glued in place http://www.deanknowsley.com/hood4.jpg Inside, with metal contact in place on stopper. http://www.deanknowsley.com/hood5.jpg Upper hood part, external, wiring, http://www.deanknowsley.com/hood6.jpg Contact on stopper, upper hood part. The kit is ready to go into the 8 now...just sorting out the mac mini. Will need to pick someones brains on the Carnetix 1900 hook-up, a few things are bugging me...but thats a bit later. What kind of relay did you use to power off your monitor when the Nav hood closes? I'm finally getting around to Installing my car pc and any wiring tips you could give would be much appreciated, as I am a complete noob when it comes to wiring a relay. |
Update - Mac System sold, NEXUS 7 Tablet installed, all working, all bugs ironed out. Photos to come of install soon....
|
All times are GMT -5. The time now is 01:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands