RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Interior, Audio, and Electronics (https://www.rx8club.com/series-i-interior-audio-electronics-24/)
-   -   Kicker Solo Baric (https://www.rx8club.com/series-i-interior-audio-electronics-24/kicker-solo-baric-50704/)

Slims8 01-21-2005 02:05 PM

Kicker Solo Baric
 
Anyone have a Kicker Solo Baric?

I just got mine in today and am going to put it in the '8 tonight. I got a Kicker Solo Baric 10" with a ported Box. I've had 2 in my Mustang and 1 in a truck, but was just wondering if they were fair sounding in the '8.

Praga 01-22-2005 05:33 AM

I'm running two 10" L7's on Kicker KX1200 and it's just bad ass. I've been involved with car audio for quite a while, did the IASCA and USAC circuit in the mid 90's and there's been very few times Ive heard this much bass out of a pair of 10's.

I've never metered it, but I'd guesstimate it be turning around 140- 144 SPL @ 30 db. It's a rear facing, ported box tuned to 30 db.

arcnphat 01-23-2005 10:57 PM

got a l7 dual 4ohm running at 2 ohm off a kicker zx 400.1 and I have to say I am completly amazed in the sound. Its all about the box. Oh its also sealed.

Slims8 01-24-2005 09:37 AM

Well, Finally got mine installed. I'm still waiting on my amp, but I got the 10" L7 with a ported box and a profile amp (had it for 3 years... still waiting on mine to come in). I am extremely impressed. I have 2 Kicker Comp VR 10s in my Mustang and they don't touch this set up. I am very satisfied.

MyFirstRotary 01-25-2005 11:58 AM


Originally Posted by Praga
I'm running two 10" L7's on Kicker KX1200 and it's just bad ass. I've been involved with car audio for quite a while, did the IASCA and USAC circuit in the mid 90's and there's been very few times Ive heard this much bass out of a pair of 10's.

I've never metered it, but I'd guesstimate it be turning around 140- 144 SPL @ 30 db. It's a rear facing, ported box tuned to 30 db.


Do you get a lot of trunk vibration? I want to get started on my stereo install, but I'm worried on the vibration that the trunk will make from the subs.

Thanks
Ciro

Slims8 01-25-2005 03:48 PM

I get very little vibration at all. Usually the only rattles I get are things in my front door panels or my trunk. Once a week when it's clean, no rattles.

Praga 01-25-2005 07:54 PM

lol, my trunk lid jumps about a half inch. Ive got the entire trunk dynomatted, so it doesnt really rattle though.

The problem Im having now is everything back there keeps vibrating loose. My high end amp's screwed to the front of the enclosure so you can see it thru the pass-thru, and it's fell off twice. Once because the screws rattled out then most recently they just sheared off. The box itself has come unscrewed from the floor a couple times and the brackets I made up attaching the top front of the box to the rear deck keep falling off too.

With the way it jumps around, I predict my spoiler's gonna probobly work its way loose soon


Originally Posted by MyFirstRotary
Do you get a lot of trunk vibration? I want to get started on my stereo install, but I'm worried on the vibration that the trunk will make from the subs.

Thanks
Ciro


ltrx8 01-27-2005 11:57 PM

I also have a 10 " L5 in Bassworx SPL enclosure powered by a KX600.1..Fits perfectly in the recess of the trunk.. Kicks really solid and smooth with 40-50% polyester fill stuffed into main chamber (inside past the port).. A fellow at Visions Electronics said he has installed systems for 15 yrs and he was surprised by the bass generated inside the car.. whats sick is theres a 2500 watt 10 " solo X and a 2500W amp combo available by Kicker!!!

Praga 01-28-2005 01:53 PM

Yep, that solox driver is pretty pricey. The guys at my shop say that it turns some big numbers but sounds like crap.


All times are GMT -5. The time now is 01:22 AM.


© 2024 MH Sub I, LLC dba Internet Brands