Interior Doom lights
Thread Starter
The Former PSNTLSS
iTrader: (3)
Joined: Jun 2007
Posts: 1,094
Likes: 0
From: South Plainfield, NJ/ Center Valley, PA
Interior Doom lights
The stock ones I have personally, work but are not bright enough. What does anyone recommend to buy.
I have seen super white or super blues
any recommendations
thanks
I have seen super white or super blues
any recommendations
thanks
www.vleds.com super whites
There are so many on Vleds it's not funny.
Now they have Super Flux LEDs that are apparently bright as hell and have a temp of 4500K.
I emailled them to see if they have 194s to match the 4500K but they said something to the effect of "order the high power 194 and mention that you want 4500K and they will try to match the color to the festoon bulb".
I'm holding off on buying interior and exterior 194s untill I can get 4500K to match my headlights and fogs and to create a truely white powa kinda environment in my car.
Now they have Super Flux LEDs that are apparently bright as hell and have a temp of 4500K.
I emailled them to see if they have 194s to match the 4500K but they said something to the effect of "order the high power 194 and mention that you want 4500K and they will try to match the color to the festoon bulb".
I'm holding off on buying interior and exterior 194s untill I can get 4500K to match my headlights and fogs and to create a truely white powa kinda environment in my car.
I put a couple of 3 watt blue leds in the reading light holder holes in the console - less than 100% satisfied.
VERY bright, but they need both a heatsink AND a 5 watt resistor each, and one of the above is trying to melt it's way out of the console! I have what looks like a cigarette burn forming between the lights.....DOH!
S
VERY bright, but they need both a heatsink AND a 5 watt resistor each, and one of the above is trying to melt it's way out of the console! I have what looks like a cigarette burn forming between the lights.....DOH!
S
Thread
Thread Starter
Forum
Replies
Last Post



