I want to install Parrot Mic, but I cannot find how remove a part of my car to pass the mic wire. Who can help me?
Thnaks

 

You dont want to mess with the air bags . Very good risk of injury , or diabling the airbag.

 

Where Can I Install the mic, and where pass its cable?
Thanks

 

he Thommino listen to RotorWheee, yes that is an airbag, don't touch it unless you know what you are doing....but just be patient someone around here knows what to do

 

all you have to do is push the wire with a small flathead scredriver into the pillar, there is enough room back there for a lot of wires. I have my radar detector as well as a wire for the antenna of my Viper alarm running down that column.

 

BlueGrimRX8, can you expand on that, maybe with a DIY entry or pictures? Thanks!

 

But there is space also in that place yellow circled?
Thanks

 

yes, i did that too with a radar detector where I wedged the wire between the frame and the pillar. A DIY isn't really necessary.

 

just make sure you have enough slack to run the wire from whereever up the pillar and across the front, then wrap a small flathead screwdriver with a thin cloth (don't want to scratch anything) then push the wire in and down a little so that it gets stuck behind the pillar. Don't have any pics becuase I am at work but if you don't figure it out PM me.

 

Thanks, I hope to successfull with it.