Help with Leather Retrofit
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Annapolis Maryland
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Help with Leather Retrofit
So i have purchased a set of leather seats to replace my cloth. I was wondering if anyone has done this, and if the wiring is already in place??? Any help would be appreciated.
Thanks!!!
Thanks!!!
#2
I made some poos
iTrader: (1)
Join Date: Sep 2005
Location: Pittsburgh, PA
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
As far as I know, the wiring is present on all models.
Be careful removing the seats, and be sure to disconnect the battery. You do not want an airbag going off in your face.
Be careful removing the seats, and be sure to disconnect the battery. You do not want an airbag going off in your face.
#3
Hit & Run Magnet
iTrader: (3)
i've pulled all my seats before. its no big deal. just 4 bolts per front seat. and 2 bolts per back seat.
if you want, i can come help you. or if you want, PM me for my cell number and when you do it, if you have problems you can call me.
it might be a good idea to vacuum your car with the seats out. makes it easy.
if you want, i can come help you. or if you want, PM me for my cell number and when you do it, if you have problems you can call me.
it might be a good idea to vacuum your car with the seats out. makes it easy.
#4
Registered User
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Annapolis Maryland
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
I pulled off the center console panel today to see if the heated seat plugs were there but i dont see anything. Also, when looking at the non yellow connector under the seat, i am only seeing 6 wires going into it... Does this mean im gonna have to wire all this myself?
Thread
Thread Starter
Forum
Replies
Last Post
Brooklynite
NE For Sale/Wanted
4
11-10-2015 06:42 PM
jasonrxeight
RX-8's For Sale/Wanted
2
09-30-2015 01:53 PM