Fixing Scuff Marks on Door Panels?
My RX8 has a few scuff marks on the lower door panels, most likely from folks hitting it with their feet as they get in the car.
Is there a cheap and easy way to fix these? Or at least make them less obvious?
Thanks.
Is there a cheap and easy way to fix these? Or at least make them less obvious?
Thanks.
Yeah, I'd like to hear some ideas on this as well. It's almost unavoidable as people pick up grit and little stones in their shoes and if they happen to drag a sole as they climb in, you scuff the hell out of the plastic.
I've not yet seen any products out there that would help restore the plastic - hopefully something exists.
I've not yet seen any products out there that would help restore the plastic - hopefully something exists.
I bought a used 2004 a few months ago and the interior was in a flawless state except for the scuff plates, so I decided to buy the replacements from parts.com:
Part number F15168720B02 (left side)
Part number F15168710B02 (right side)
Each one is $32.89. Installation is very easy: just pull up the old one out and press the new one in. Takes about 3 mins each side.
I know it's not the cheapest way to fix them, but I'm so happy now since my car interior looks new...
Now I have to move on to those rusted rotors....
Part number F15168720B02 (left side)
Part number F15168710B02 (right side)
Each one is $32.89. Installation is very easy: just pull up the old one out and press the new one in. Takes about 3 mins each side.
I know it's not the cheapest way to fix them, but I'm so happy now since my car interior looks new...
Now I have to move on to those rusted rotors....
you can take a black candle, lighter, and a piece of like 80 grit sandpaper and fix them pretty good...
just rough up the area, melt some candle wax into the crack or scuff, let it dry, sand it a little more, then kinda bake it with the lighter once its filled then buff it out a little with a rag and some tire shine :D
just rough up the area, melt some candle wax into the crack or scuff, let it dry, sand it a little more, then kinda bake it with the lighter once its filled then buff it out a little with a rag and some tire shine :D
Did anyone find out if Back to Black works?
Every place on the inside of my car is perfect. Only the handles in the inside of the door are dull and have developed a really dull / white look to them.
I use the same Meguiars product on all the plastic, even the arm rest and it is not like this anywhere else.
Every place on the inside of my car is perfect. Only the handles in the inside of the door are dull and have developed a really dull / white look to them.
I use the same Meguiars product on all the plastic, even the arm rest and it is not like this anywhere else.
I've never seen this Forever Black. Where do I find it? Is it in auto stores? Thanks!
I know, very late reply.
Tried Mother's back to black last weekend. While it made the part look better it did not fix it past say 75%. You can still see the grooves and white.
Guess I will try forever black next. However for $70 referenced above it might just be better to buy new panels.
Take care,
Brian
Tried Mother's back to black last weekend. While it made the part look better it did not fix it past say 75%. You can still see the grooves and white.
Guess I will try forever black next. However for $70 referenced above it might just be better to buy new panels.
Take care,
Brian
IME, Back to Black doesn't do much for scratches, it's just similar to tire shine but for plastic parts.
On my last car I used Mother's Plastic Polish with goo results removing hairline scratches from interior plastics, but the plastics weren't as textured as the RX-8s are. Might be worth a shot: http://www.autogeek.net/motplaspol.html
On my last car I used Mother's Plastic Polish with goo results removing hairline scratches from interior plastics, but the plastics weren't as textured as the RX-8s are. Might be worth a shot: http://www.autogeek.net/motplaspol.html
Thread
Thread Starter
Forum
Replies
Last Post
czr
RX-8 Parts For Sale/Wanted
4
Sep 13, 2015 11:37 AM




