Defi Meter
Defi Mater
Oil Press, Water Temp and Oil Temp. |
Oil Press and Oil Temp Sensor Atachment
|
Sure does look purty. You install it yourself? If so...how long did it take?
How much did the setup cost? |
Hmmm... good news.
Now if we can just get a vendor (Defi, perhaps?) to come out with replacement gauges for the standard factory location, in the dash pod. |
Useful but I don't like the way they look on the pillar, just my opinion. I'd love the one Mazdaspeed is working on that displays the gauges on the Navi screen, HOT!!
|
I take it that disables the airbag in the pillar, right? As long as you don't wind up having gauges flying at your face in the case of an accident, I think they look great, but, yeah, I'll wait for the digital gauges myself.... Shouldn't be too much longer.
|
When I saw the title. I think it will be pretty rice. Not really. It is nice. I prefer on your nav top though. Better yet have a button to toggle between the meter screen and your GPS screen :)
|
nice setup, defi makes excellent products both functionally and asethetically. they match the stock gauges of the rx8 well. but I prefer that the gauges be mounted in where the navigation would go, over the red display interface on the dash rather than over the airbags so we dont have gauges flying at my face in an unfortunate accident
|
Think it looks very good
|
Mazdaspeed/Defi Cluster
found online for $1595.95 |
Thankyu ALL
I hesitated you will install Defi Mater on the left side of the meter panel and either one of the pillar. But because the curtain air bag has not been attached to the pillar of my car, meter was installed to the pillar. |
Sorry...
MAZDASPEED, FEED -=> 52mm My Mater is 60mm |
Defi Meter
What do you think?
My RX-8 is no Curtain AIR bag. If air bag operating, it does not fly meter to the face. |
Looks GREAT!!! Can you take a pic at night? I want to see how nice it is with the OEM gauges... I'm sure it's a perfect match!!
Here are my gauges in my FD... http://www.jayspec7.com/events/ix100403/0211.jpg |
where can you get these gauges again?
|
Question that last pic is of a rx8 correct?
So where are the controls for the ac, heat, ect? |
Originally posted by LiL BenNy Question that last pic is of a rx8 correct? So where are the controls for the ac, heat, ect? |
This is maybe a tad cleaner and safer for US drivers...
https://www.rx8club.com/showthread.p...threadid=27283 |
Even without the curtain airbag, I wouldn't really want gauges on the a-pillar. That pillar is beafy enough as it is and creates a blind spot to my left (JPY right) side.
|
DAMN THEY LOOK SO COOL.....................
well i want the defi gauges over the dash board but not in that ugly mazda box housing, i want the one the tilts toward you thats wavy if that meakes sense |
You mean the FEED dash kit, Dookie_Rx-8. I haven't seen a similar one anywhere else and someone checked, but didn't hear back from FEED about making a US model of it.
|
All times are GMT -5. The time now is 07:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands