converting to HIDs
11-17-2007, 01:29 AM
#2
MaZdAEr
Join Date: Aug 2007
Location: Maryland
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
You need more than just changing bulbs. HIDs need ballasts which generate very high volts to 'force' Xenon to produce lights.
So you need a whole HID kit if you don't have factory HIDs.
So you need a whole HID kit if you don't have factory HIDs.
Last edited by dEEpsEa; 11-17-2007 at 01:33 AM.
11-19-2007, 08:40 AM
#3
Registered
Thread Starter
Join Date: Nov 2007
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
I know this. I was wondering if I buy the stock ballast and bulbs and what ever elts. Do I need to tag it in to the light harness or is ther alreaddy a connector for the ballast in the harness. Because many maufactures just make one harness and hide the connectors that are not in use.
11-19-2007, 09:38 AM
#4
i bought mine here at this site, very easy to install and came with all the necessary parts needed to do the swap, dont get the ebay ones they will not fit because of the size of the universal bulb, the swap took me about 35-40 start to finish
http://www.therpmstore.com/index.php
http://www.therpmstore.com/index.php
11-23-2007, 08:42 PM
#5
Registered
i bought mine here at this site, very easy to install and came with all the necessary parts needed to do the swap, dont get the ebay ones they will not fit because of the size of the universal bulb, the swap took me about 35-40 start to finish
http://www.therpmstore.com/index.php
http://www.therpmstore.com/index.php
11-24-2007, 08:24 AM
#7
Registered
http://www.therpmstore.com/product_i...products_id=38
this is the one i got
this is the one i got
In the options, at the bottom of the page, what "Bulb Type" did you choose:
The "Stock" H7 low beam type bulb, or the "D2" type (Like the factory HID cars)?
Thread
Thread Starter
Forum
Replies
Last Post
jasonrxeight
RX-8's For Sale/Wanted
2
09-30-2015 01:53 PM