Notices

Blacked out display

Old Aug 2, 2008 | 09:37 PM
  #26  
Nopstnz8's Avatar
Registered
iTrader: (6)
 
Joined: Jun 2007
Posts: 1,781
Likes: 0
From: Pleasanton, CA
Sorry about that. I'm trying to remember from memory. I meant to say they are the gold screws. It is the one on the passenger side of the radio. Try clicking it and pressing on it multiple times. That is the one that powers everything.
Reply
Old Aug 5, 2008 | 10:14 AM
  #27  
Blackout04RX's Avatar
Thread Starter
Need for Speed Satisfied
 
Joined: Mar 2008
Posts: 343
Likes: 0
From: Monroe, CT
im sorry if im getting annoying haha. i found two screws that go up into the ac... one one each plastic piece (the pieces that come around the arrow you drew) is the one on the passenger side the one you are talking about? or yet again am i missing it?
Reply
Old Aug 5, 2008 | 10:38 AM
  #28  
Nopstnz8's Avatar
Registered
iTrader: (6)
 
Joined: Jun 2007
Posts: 1,781
Likes: 0
From: Pleasanton, CA
Yes it is on the passenger side.
Reply
Old Aug 5, 2008 | 05:33 PM
  #29  
Blackout04RX's Avatar
Thread Starter
Need for Speed Satisfied
 
Joined: Mar 2008
Posts: 343
Likes: 0
From: Monroe, CT
is this it?

I went and took the radio out and snapped some pics. is the one on the right it?
Attached Thumbnails Blacked out display-100_1136.jpg  
Reply
Old Aug 6, 2008 | 01:34 AM
  #30  
Nopstnz8's Avatar
Registered
iTrader: (6)
 
Joined: Jun 2007
Posts: 1,781
Likes: 0
From: Pleasanton, CA
No. I think it actually looks like a spacer. Lets say you were sitting in the driver's seat and just pulled out the unit. Once it is out you would look at the top right corner on the passenger side of the radio. Now if you were looking on that side of the radio, bt the back of it, you would see a gold looking "spacer" that controls the radio, display and climate control. Try pressing or clicking this until the radio comes back. Did this help? If not, I will try to find a pic of the piece.
Reply
Old Aug 6, 2008 | 11:21 AM
  #31  
Blackout04RX's Avatar
Thread Starter
Need for Speed Satisfied
 
Joined: Mar 2008
Posts: 343
Likes: 0
From: Monroe, CT
kasd

I have another pic I can use. I'll post that up
Attached Thumbnails Blacked out display-100_1132.jpg   Blacked out display-100_1134.jpg   Blacked out display-100_1136.jpg  
Reply
Old Aug 6, 2008 | 11:22 AM
  #32  
Blackout04RX's Avatar
Thread Starter
Need for Speed Satisfied
 
Joined: Mar 2008
Posts: 343
Likes: 0
From: Monroe, CT
kasd

I have another pic I can use. I'll post that up. see if you can help me id this damn thing. the only spacer looking screw is on the very very back, in the center. but this is nowhere near where that arrow you drew on that other pic was.
Reply
Old Aug 7, 2008 | 01:19 PM
  #33  
Nopstnz8's Avatar
Registered
iTrader: (6)
 
Joined: Jun 2007
Posts: 1,781
Likes: 0
From: Pleasanton, CA
It is the gold looking spacer on the passenger side. This connects the faceplate to the radio. There is one on the driver side and one on the passenger side. You are concerned with the passenger one, not the driver one. I will try to find some more pics of what I am talking about.
Reply
Old Aug 8, 2008 | 11:26 AM
  #34  
Blackout04RX's Avatar
Thread Starter
Need for Speed Satisfied
 
Joined: Mar 2008
Posts: 343
Likes: 0
From: Monroe, CT
hmmm i have no idea what u are talking about... if it didnt show in the pictures i took, then i am totally lost...
Reply
Old Aug 8, 2008 | 11:59 AM
  #35  
Nopstnz8's Avatar
Registered
iTrader: (6)
 
Joined: Jun 2007
Posts: 1,781
Likes: 0
From: Pleasanton, CA
It is a piece that connects the piano black faceplate to the radio. I had mine in the car with the battery conncected when I fixed it to see if what I was doing would work.
Reply
Old Aug 9, 2008 | 01:37 PM
  #36  
Blackout04RX's Avatar
Thread Starter
Need for Speed Satisfied
 
Joined: Mar 2008
Posts: 343
Likes: 0
From: Monroe, CT
Then I am at a total loss because i only have four screws that hold them together... take a pic of this mystery connection... plz of course. i am starting to feel like either im a total retard or i saw this connection and it didnt work, in which case I dont even want to think about the cost of repair. its too much.
Reply
Old Aug 9, 2008 | 04:53 PM
  #37  
Nopstnz8's Avatar
Registered
iTrader: (6)
 
Joined: Jun 2007
Posts: 1,781
Likes: 0
From: Pleasanton, CA
Take some pics of the back and side of the passenger side of the radio. I don't want to have to take mine out to show you the part. Then I can tell you the exact piece you need to play around with to fix the radio.
Reply
Old Aug 10, 2008 | 04:24 PM
  #38  
Blackout04RX's Avatar
Thread Starter
Need for Speed Satisfied
 
Joined: Mar 2008
Posts: 343
Likes: 0
From: Monroe, CT
i am sick today, so these are all that i have on hand. when im feeling better ill get out and snap the passenger side.
Attached Thumbnails Blacked out display-100_1132.jpg   Blacked out display-100_1130.jpg  
Reply
Old Aug 13, 2008 | 04:33 PM
  #39  
Nopstnz8's Avatar
Registered
iTrader: (6)
 
Joined: Jun 2007
Posts: 1,781
Likes: 0
From: Pleasanton, CA
Pics?
Reply
Old Aug 14, 2008 | 02:53 PM
  #40  
Blackout04RX's Avatar
Thread Starter
Need for Speed Satisfied
 
Joined: Mar 2008
Posts: 343
Likes: 0
From: Monroe, CT
yeah sry my eye only just started clearing up today, ill head out in a lil bit and take the dash apart again. gotta get my contacts and **** in.
Reply
Old Aug 15, 2008 | 03:48 AM
  #41  
slimjimrx8's Avatar
Registered User
 
Joined: Mar 2008
Posts: 237
Likes: 0
From: Q.V. Queens


this had happend to me also...
1st. inspect it and see if there is any cracks or broken pieces where those screws are.
2nd. try making sure they are tight and make sure the pins between the faceplate and the HU are lined up correctly(it would be located by near the top of the two screws, but further hidden)
if you need to open it up and look at it to see what im talking about.
make sure those bolts are all completely secure between the faceplate and the the HU again.
mainly make sure there are no cracks because the plastic there can be fragile
Reply
Old Aug 15, 2008 | 03:51 AM
  #42  
slimjimrx8's Avatar
Registered User
 
Joined: Mar 2008
Posts: 237
Likes: 0
From: Q.V. Queens
Reply
Old Aug 15, 2008 | 03:56 AM
  #43  
slimjimrx8's Avatar
Registered User
 
Joined: Mar 2008
Posts: 237
Likes: 0
From: Q.V. Queens
oh..and of course make sure u connect all the connectors properly including the black plug
Reply
Old Aug 15, 2008 | 12:08 PM
  #44  
Nopstnz8's Avatar
Registered
iTrader: (6)
 
Joined: Jun 2007
Posts: 1,781
Likes: 0
From: Pleasanton, CA
Thanks for the pic slimjimrx8. That is the pic I was trying to show blackoutrx8. This is the screw I was talking about. Play with the connection with the radio plugged in and then once you get it working, screw in the screw.
Reply
Old Aug 15, 2008 | 12:23 PM
  #45  
Jedi54's Avatar
Administrator
iTrader: (7)
 
Joined: Mar 2004
Posts: 22,601
Likes: 3,460
From: The Dark Side
any luck getting it fixed?
Reply
Old Aug 17, 2008 | 10:26 PM
  #46  
Blackout04RX's Avatar
Thread Starter
Need for Speed Satisfied
 
Joined: Mar 2008
Posts: 343
Likes: 0
From: Monroe, CT
i havent pulled it apart, ive been sick. i took those out, and fully seperated the two before, tried fixing all the connections. these solutions dont seem to have fixed it. I did notice the two connections between the two inside, and wondered about those... but idk how to make sure those are good. ill try and check tommorow morning before i go away for a week. I hate to say it but I think I need to start thinking about a new radio...
Reply
Old Aug 18, 2008 | 11:47 PM
  #47  
Nopstnz8's Avatar
Registered
iTrader: (6)
 
Joined: Jun 2007
Posts: 1,781
Likes: 0
From: Pleasanton, CA
Put the unit completely back together and put it back in the car. Then with the car battery still connected, remove the top gold screw on the passenger side, it connects the piano black faceplate to the radio. Then pull only the part where the screw was removed to slighly seperate the faceplate from the radio. Once you have done this, snap the two pieces back together. Keep trying this until the radio comes back on. Once it does, put the screw back in and put the unit back in the dash. The cause of your problem, as well as mine probably occurred when you removed the radio from the dash. When I did it, I must have pulled it out wrong because one side of the face plate seperated. Snaping the face plate back on didn't fix the problem. I had to seperate the pieces, then put them back together and press on that section from the faceplate side, once I did this the radio and air conditioning came back. Hope this helps.
Reply
Old Aug 27, 2008 | 02:11 AM
  #48  
Blackout04RX's Avatar
Thread Starter
Need for Speed Satisfied
 
Joined: Mar 2008
Posts: 343
Likes: 0
From: Monroe, CT
Sorry I was away, but theres been a breakthrough lol. THE RADIO AND A/C ARE BACK. While I was trying that screw the way you said, I noticed a difference in gap between the faceplate in radio... as shown in pic. the passenger side connection you cant really see when ur just looking at it, wasnt connected. Somehow when I pulled it out the first time, the passenger side mounting screws bent.... also shown. You can see a huge difference. So I took the radio out of car, obviously and redid these. I put the radio back in the car, and got the radio back. The A/C is back. Temp Control is back. Can I see any of it.... NO!!!!! Everything works, including the ipod adapter, but the display isnt working. I forgot to check if the backlights work, but i thought those were off the same circuit as the display. Any thoughts?
Attached Thumbnails Blacked out display-100_1171.jpg   Blacked out display-100_1172.jpg   Blacked out display-100_1170.jpg   Blacked out display-100_1174.jpg  
Reply
Old Aug 27, 2008 | 02:13 AM
  #49  
Blackout04RX's Avatar
Thread Starter
Need for Speed Satisfied
 
Joined: Mar 2008
Posts: 343
Likes: 0
From: Monroe, CT
let this also be a good thing to check if you forget that pain in the *** screw under the steering wheel. Make sure if your radio cuts out, that you check!
Reply
Old Aug 27, 2008 | 02:52 AM
  #50  
Blackout04RX's Avatar
Thread Starter
Need for Speed Satisfied
 
Joined: Mar 2008
Posts: 343
Likes: 0
From: Monroe, CT
I actually got the display working too. MY BABY IS BACK! And I fixed it without having to spend a monster load of cash on a new radio and kit. Tommorow, well today the subs are going in, and ill get pics up of that.
Reply

Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 03:23 AM.