RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Interior, Audio, and Electronics (https://www.rx8club.com/series-i-interior-audio-electronics-24/)
-   -   Beltronics RX75 plus: new gadget for the shinka (https://www.rx8club.com/series-i-interior-audio-electronics-24/beltronics-rx75-plus-new-gadget-shinka-119125/)

shinka213 06-10-2007 10:25 PM

Beltronics RX75 plus: new gadget for the shinka
 
just purchased the Beltronics rx75 plus.....install is mostly completed...here are some pics so far:

this is the controller

http://img503.imageshack.us/img503/87/p6100011zt3.jpg

this is the laser unit on the rear bumper (still has protective film on it)

http://i108.photobucket.com/albums/n...%20car/001.jpg

I will post up somemore pics tomorrow...:D:

more pics:

http://img488.imageshack.us/img488/3454/p6110017iz5.jpg

http://img519.imageshack.us/img519/7311/p6110018hj4.jpg

lurch519 06-10-2007 10:33 PM

hey, that install work looks familiar

shinka213 06-10-2007 10:40 PM


Originally Posted by lurch519 (Post 1919791)
hey, that install work looks familiar

i bet it does.... :rollingla

when its complete, im gonna have to spread kudos all over the forum

:D:

NgoRX8 06-10-2007 10:44 PM

wow that looks very clean!

lurch519 06-10-2007 10:50 PM

thank you sir

shinka213 06-10-2007 10:57 PM

yep....i think lurch did an awesome install on that controller....:D:

couldnt have done better myself....i'll try to get some pics tomorrow of the 2 laser detectors on the front bumper..

Jedi54 06-11-2007 11:01 AM

That's HAWT

jskup1 06-11-2007 11:08 AM

Looks good Pat, that is almost where I mounted the controller for mine. I instead put mine in the blank plate under the radio knob. I'm thinking of moving it to directly below the gauges in the Lotek gauge pod. Did you get the optional speaker and bi-color LED? The LED mounted in the Speedo cluster is a great attention getter as is the speaker with voice warning. Great Choice in detector!

shinka213 06-11-2007 02:59 PM


Originally Posted by jskup1 (Post 1920448)
Looks good Pat, that is almost where I mounted the controller for mine. I instead put mine in the blank plate under the radio knob. I'm thinking of moving it to directly below the gauges in the Lotek gauge pod. Did you get the optional speaker and bi-color LED? The LED mounted in the Speedo cluster is a great attention getter as is the speaker with voice warning. Great Choice in detector!

there are some other things yet to be installed...one of which is the speaker...
and the radar detector in the front bumper....
not sure about the bi-color LED....i will have to ask lurch about that one..

:D:

we were gonna put it in that moon-shaped area below the radio knob but it was just about 4mm to big....
it woulda looked saweet...

eviltwinkie 06-11-2007 03:03 PM

You just like sayin SHINKA...oh wait...ha

Nice install...altho a laser/radar jammer would have been my preferance but I guess I need to finish that up some day...

Would probably be easier to trangulate the location of the patrol cars based on thier trunked radio units tho...

Bah...one day...one day...

shinka213 06-11-2007 03:31 PM


Originally Posted by eviltwinkie (Post 1920857)
You just like sayin SHINKA...oh wait...ha

Nice install...altho a laser/radar jammer would have been my preferance but I guess I need to finish that up some day...

Would probably be easier to trangulate the location of the patrol cars based on thier trunked radio units tho...

Bah...one day...one day...

I believe it is a jammer :D:

eviltwinkie 06-11-2007 03:35 PM


Originally Posted by shinka213 (Post 1920906)
I believe it is a jammer :D:

Negative...doesnt jam, just detects...I researched the whole family line before ending up with the 65 myself...

Technically it would be illegal to interfere according to the FCC so no one *could* sell you one. And dont believe in those Rocky Moutain people either...

Phase modulation does not work nearly as well as reduction of signal with noise...and even then depending on proximity eventually it will lock...

=)

jskup1 06-11-2007 03:38 PM


Originally Posted by shinka213 (Post 1920850)
we were gonna put it in that moon-shaped area below the radio knob but it was just about 4mm to big....
it woulda looked saweet...

That's exactly where I put mine. It took a little modification, but it's pretty cool. I'll post a pic this weekend when I get home.

eviltwinkie 06-11-2007 03:44 PM

Wait did you install the laser blocking module? Cause I was talking about the radar not the "laser" which is actually infrared...that module apparently works decently...

jskup1 06-11-2007 03:50 PM

Pat, I found a pic in a long ago post. https://www.rx8club.com/attachment.p...8&d=1151110799

eviltwinkie: This system comes with a front radar sensor, two front laser detectors/shifters and a rear laser detector/shifter.

eviltwinkie 06-11-2007 03:55 PM


Originally Posted by jskup1 (Post 1920936)
Pat, I found a pic in a long ago post. https://www.rx8club.com/attachment.p...8&d=1151110799

eviltwinkie: This system comes with a front radar sensor, two front laser detectors/shifters and a rear laser detector/shifter.

Right but unless you have the "plus" system it lacks the laser "blocking" module...hence the question...

EDIT: DUH! Freaking thread topic is about the "plus"...haa haa

shinka213 06-11-2007 03:59 PM


Originally Posted by eviltwinkie (Post 1920943)
Right but unless you have the "plus" system it lacks the laser "blocking" module...hence the question...

EDIT: DUH! Freaking thread topic is about the "plus"...haa haa

i was wondering what was goin on with you....
you must be way to B@W today...

:rollingla

shinka213 06-11-2007 04:01 PM


Originally Posted by jskup1 (Post 1920919)
That's exactly where I put mine. It took a little modification, but it's pretty cool. I'll post a pic this weekend when I get home.

that really looks saweet...

do you have the bose?? we looked internally and chuck didnt wanna modifiy the circiut board...

:D:

eviltwinkie 06-11-2007 04:10 PM


Originally Posted by shinka213 (Post 1920948)
i was wondering what was goin on with you....
you must be way to B@W today...

:rollingla

tis monday...just another manic monday...wish it was sunday...or better yet saturday...but instead...just another manic mondayyyyy

jskup1 06-11-2007 04:14 PM


Originally Posted by shinka213 (Post 1920949)
that really looks saweet...

do you have the bose?? we looked internally and chuck didnt wanna modifiy the circiut board...

:D:

Yes, I have the bose. I didn't have to modify the circuit board at all. I used a hobby saw and trimmed off the sides of the casing and it fit perfectly. If the circuit board was 2MM larger, it wouldn't have fit.

shinka213 06-11-2007 04:45 PM


Originally Posted by jskup1 (Post 1920966)
Yes, I have the bose. I didn't have to modify the circuit board at all. I used a hobby saw and trimmed off the sides of the casing and it fit perfectly. If the circuit board was 2MM larger, it wouldn't have fit.

dayum.....yours does look hawt....
we both looked at it but didnt think it would work...chuck didnt wanna damage anything....

its all good....i like where it is....:D:

jskup1 06-11-2007 05:46 PM

Pat, I like yours as well. This radar detector works really well. You will still get a few false alarms around drug and grocery stores, but it blocks most of them out. You may want to just go ahead and disable the "X" band because I don't believe any cops use it anymore. That will eliminate about 90% of the false alarms. Definately find out if you have the dash mount LED. A lot of times if I'm driving with the radio turned up, I don't hear the radar detector, but I see the flashing red light in the cluster. If you don't have it, contact Beltronics and ask them to send you one. You should feel much more confindent using that S/C power with this installed.

Off topic: Are you still using the stock clutch? How is it holding up to the S/C? I'm thinking of having a new one put in when I have the S/C put in.

lurch519 06-11-2007 06:46 PM

yes, pat does have the led, just need to figure a good place to put it, that is really back burner atm, as there is a lot of other stuff to be done. it will be done though

shinka213 06-11-2007 09:14 PM

more pics added to the first post....

please excuse the dirty bumper/lip....landscapers just cut the grass.... :lol:

jskup1 06-15-2007 04:17 PM

1 Attachment(s)
Pat, here's a pic of where I mounted the LED if you need ideas.


All times are GMT -5. The time now is 08:56 AM.


© 2024 MH Sub I, LLC dba Internet Brands