Solid light blue wire in the factory radio harness
|
I love you.
|
No Homo
|
1 Attachment(s)
Hold that...
I don't seem to have a solid light blue wire coming from the factory radio harness? Attachment 288784 |
Apologies, its pink/black.
The metra kit its a blue wire. |
So the pink and black wire coming from that harness sends a 12v remote signal to the amp? Or is it a remote signal from ignition source for the headunit?
|
Connect an accessory wire into that wire, it feeds into the amp
|
Brilliant! Thank you for your help and being patient with me. I'll update once I've soldered it up.
|
Yep, that was it. As simple as that : )
Thanks for the help. Pink/Black wire from the stereo harness needed wiring up to an ignition source and it did indeed remote turn-on the OEM Bose Headunit. |
Sticky
|
I'm getting my new Pioneer AVH-X3600BHS head unit installed next Monday, It's being done by the guys at Best Buy (not myself) so I'm pretty confident everything should work fine... my question is how would I reset the display bar clock once I lose those factory buttons???
|
You RTFM
|
no M yet, on order- but thanks
|
Took 2 seconds. Page 9. You're welcome DH.
|
Remote Stopped Working, Can't start thread
Hi all,
Been beating my head against a wall for the last few days. :wallbash: :wallbash: Anyway here's the issue. My 2004 RX8 keyless entry stopped working out of nowhere, I've tried the reset programming with my old remote after changing the remote battery. That didn't work. I bought a new remote and tried programming it as well and that failed. The process seems like it works, the car opens and closes the door and what not but doesn't allow to program. Is there a way to reset the alarm? Is there a fuse somewhere that I'm missing? Is there something I'm not considering? |
Key-less entry
I had that exact problem and had no luck fixing it. I talked with a Mazda dealer and he said the cost of troubleshooting and replacement of alarm computer would cost well more than $1000.00. I opted for after market alarm, which had all the features of the OEM along with many other usefull features. Cost was $300.00.
|
Shitty, I've fixed all but two problems I've had with my car using this this forum...
One being a knocking noise in my drivers suspension/steering when I turn, the second being this. |
I have a non bose - navigation setup. My lower door speakers aren't working. Any idea where I need to start troubleshooting? I've pulled the head unit and everything is good there. Thanks in advance!
|
About the 95-7510 Metra
I Purchased the 95-7510 kit and i was wondering if your know any touch screen aftermarket radio that would fit flush with the kit and use the steering wheel controls?
b.t.w this is my first time buying a rx8 and joining the club.:) |
Originally Posted by MrLemusPro
(Post 4673265)
I Purchased the 95-7510 kit and i was wondering if your know any touch screen aftermarket radio that would fit flush with the kit and use the steering wheel controls?
b.t.w this is my first time buying a rx8 and joining the club.:) |
Hi,
I have a 2006 RX-8 with Bose 6-CD changer. The firmware is 10.01. Is there any product out there that will provide iPod/iPhone integration and also Bluetooth hands-free calling? Thanks a lot! Asif |
Sorry for rehashing up this thread, but the links on the first page for how to remove the headunit do not seem to work and am hoping you have updated links for those. I'm trying to find a picture walkthrough of removal so I can install the AUX adapter through the antenna cable output.
Unless you know this already... can I yank the antenna and plug the new cable in by going from under the CD player without having to actually remove it? |
For those using Bose system with aftermarket head unit and no sound
Problem: Head Unit has Power but no Sound
Many cars have built in amplifiers that require a 12v signal to be sent in order to turn on the Amplifier, most common being Bose, Infinity, and JBL. If your car has any of these systems, check your AMP TURNON signal wire for 12v. Blue/White wire located on Head Unit wire harness. Worked like a champ. It drove me nuts trying to figure out why there was power to the head unit but no sound, but it never occurred to me that the factory Bose amps needed power. Oh well, lesson learned. |
Bose Amp working but not front speakers.
Hello everyone. I connected a tablet to use as my head unit, to the rca cables connected to the Bose amplifier but music is only playing from the back speakers. How would I get music to play from both front and rear speakers?
|
Originally Posted by Seaborne
(Post 4707992)
Hello everyone. I connected a tablet to use as my head unit, to the rca cables connected to the Bose amplifier but music is only playing from the back speakers. How would I get music to play from both front and rear speakers?
And please start your own topic versus posted in the FAQ thread. |
Originally Posted by firebirdude
(Post 4708004)
The Bose amplifier does not have RCA connections. Please give us detail on how you connected to the Bose amp, or, what someone else may have done to the amp before you got to it.
And please start your own topic versus posted in the FAQ thread. |
is there a way to identify a unit if it is bose or not from the serial number or part number? or a way identify it when is on sale on ebay?
|
Originally Posted by stel10s
(Post 4746104)
is there a way to identify a unit if it is bose or not from the serial number or part number? or a way identify it when is on sale on ebay?
There's no physical difference between the Bose and nonBose that I'm aware of. We've even had members who've had the dealer mistakenly install the Bose in place of nonBose and vice versa. |
|
I didn't know where else to put this, but i'm having issues with my a/c not working but my radio works. When I bought the car the guy had installed an aftermarket radio and i'm not sure if that's the reason it wont work.
(I'm new to rx8club) |
Originally Posted by stel10s
(Post 4746384)
|
Wow. This helped ALOT
|
need help asap!!
Hey guys, I've tried searching all over for the answer to my question but I cant seem to find it.. I am currently installing the iSimple aux/usb kit in my factory headunit because it was version 9.50. All I have left to do is splice the ground and 12v ignition wires to the kit. I have an 04 with the bose system and gps. I have attached a picture of the wiring harness and I'm just wondering what wires to splice to? I know the black wire is the ground wire, but what wire is the 12v ignition wire? I've read that it is the green/redish orange wire, the one touching the black wire however I cant find anywhere else backing this up.
Thanks for the help!https://cimg0.ibsrv.net/gimg/www.rx8...cfc93d18a5.jpg |
Hi Firebirdude
You mention a beefier Aux in mod "Beefed up version of CD hack - iPod mod to include more control and works with any firmware version." The link to this is now dead, Do you know of any other sources? Thanks Jon |
Originally Posted by jongpoole
(Post 4759424)
Hi Firebirdude
You mention a beefier Aux in mod "Beefed up version of CD hack - iPod mod to include more control and works with any firmware version." The link to this is now dead, Do you know of any other sources? Thanks Jon |
2006 RX8 amplifier interface harness
I have already taken out my stock unit and replaced with a pioneer double din stereo. I do have the stock Bose sound system. There is no sound coming out of my speakers and was told I need an interface harness. The only one I can find is the Axxess MZTO-1 but it says only fits vehicles 2007-2010.
|
Originally Posted by itsbrittneybiz
(Post 4760048)
I have already taken out my stock unit and replaced with a pioneer double din stereo. I do have the stock Bose sound system. There is no sound coming out of my speakers and was told I need an interface harness. The only one I can find is the Axxess MZTO-1 but it says only fits vehicles 2007-2010.
|
USA Spec vs. Euro Spec
Fellas I have an opportunity to purchase a full complete Bose system I'm mint condition from a 2006 Euro spec RX8. I am not sure if my current 2004 RX8 came stock with a Bose system due to the wiring hack job. From what I can see, the rear speakers, tweeters, center speaker are all Bose. There also appears to be a factory harness for the amplifier between the rear speakers but is currently hacked up with an aftermarket amp installed. I have not checked to see if the mini amps are in the door yet. I will do that shortly.
Now that that has been said, is there any difference between USA spec and Euro spec RX8? I mainly want to know if this system will be plug and play. The system I am looking to buy also has the auto climate. I searched through this section but did not find my answer. Please advise. |
TBH, I really don't know. But I do know the tuner outside the US runs on even numbers frequencies, versus the odd numbers we use here. So goodbye FM reception.
Other than sloppy wiring, what's wrong with what's in there? Because the factory Bose system is nothing special. You could always just buy the Bose amplifier and use an aftermarket head unit. Please start a new thread and post up pictures if you can't get it figured out. This is not a topic to post in. |
Hey all, I didnt see my question posted elsewhere, so I hope it's not a repeat...
I have a Bose system in my 04... previous owner installed an aftermarket head unit (seems to be installed properly, I even have the editing capabilities of the lil factory display screen above the center vents, can change the text, etc)... While the music gets loud I really feel like it's missing something.. that a Bose system wouldn't be. Are there cases where the aftermarket head unit isnt very compatible with the bose system? Any additional wiring that should be hooked up? From what I can tell all the speakers/tweeters are working, there is no sound distortion either... it just sounds like it's kind of linear, even after audio adjustments via the head unit. Is there a way to maybe make sure the amp is outputting properly, or even working period? Im not big into audio/electrical so Im kind of a newb in this department. |
People spend thousands of dollars to make their audio system sound linear. :) Tough to understand exactly what you mean. And if all the speakers in the vehicle are working, the Bose amp is at least working. You cannot just wire the aftermarket head unit directly to all the factory speakers.
Without specific details, there's really not much any of us can do/infer. I suggest taking it to a professional and letting them listen and spend even 5 minutes with it. From there, as a professional, I'd pull the harness from the Bose amp's outputs and use a variable frequency tone generator to each speaker. Just to give me quick assurance that each speaker is working and playing the frequencies it should. Then I'd pull the head unit and see what's going on behind there. More involved, so I'd certainly be charging you money at that point. Please start a new thread and post up pictures if you can't get it figured out. This is not a topic to post in. |
Originally Posted by firebirdude
(Post 4762690)
People spend thousands of dollars to make their audio system sound linear. :) Tough to understand exactly what you mean. And if all the speakers in the vehicle are working, the Bose amp is at least working. You cannot just wire the aftermarket head unit directly to all the factory speakers.
Without specific details, there's really not much any of us can do/infer. I suggest taking it to a professional and letting them listen and spend even 5 minutes with it. From there, as a professional, I'd pull the harness from the Bose amp's outputs and use a variable frequency tone generator to each speaker. Just to give me quick assurance that each speaker is working and playing the frequencies it should. Then I'd pull the head unit and see what's going on behind there. More involved, so I'd certainly be charging you money at that point. Please start a new thread and post up pictures if you can't get it figured out. This is not a topic to post in. |
I just installed a Pioneer AppRadio SPH-DA120 using a Metra 95-7510. It's mostly working as intended but I have 2 stubborn issues I'm hoping you can help me with.
1. There is a fairly loud hissing coming from the font door tweeters when the HU is on and even when the volume is set at 0. The Metra harness is grounded to one of the screws holding the manual shifter assembly. Same hissing with or without that dedicated ground connection. It's the same on FM and other types of inputs. It doesn't change when I unplug the antenna cable. It doesn't change with engine revving. Could this have something to do with some bad interaction between the Pioneer and the stock amp? 2. The A/C MODE buttons (middle of the 3 climate controls) works fine but no longer "bips" when changing settings (neither the central round button nor the other 4 around it). Is the Metra kit not supposed to restore that functionality? Thanks in advance! |
My metra kit does not beep when I change settings with the HVAC buttons.
Does the hissing sound change with engine revs or when the interior light turns on/off? (mine did and it was due to faulty wire connections with the speakers I heard the noise from). |
The hissing is very constant and there as soon as I power up the HU. Correction though, it's on all the speakers. It's most noticeable on the tweeters but careful listening shows it's on all 6 speakers (factory Bose system on 2004 RX-8).
|
Have you already confirmed all your connections are correct/making full contact? Especially adding the metra kit it adds extra connections to deal with, so its easier to mess something up, haha. Im not much with wiring so hopefully someone else can assist you.
|
Anyone know if the colors of the wires that go into the Bose amp match the colors of the wires on the headunit harness. Also anyone know for sure the wire colors on a Bose 04 GT, or at least the best way to test them at the amp, or the amp pinouts? Thanks
|
I stumbled across a site that has detailed specs for (and a brief analysis of) the OEM Bose mid-woofer. The speaker listed is from a 2008 Cadillac CTS-V, but it looks to be the same as ours.
http://medleysmusings.com/bose-10-oem-woofer/ Re = 0.4625 ohms Fs = 45.6971 Hz Zmax = 2.0756 ohms Qes = 1.2681 Qms = 4.4224 Qts = 0.9855 Le = 0.1834 mH (at 1 kHz) Diam = 215.9000 mm ( 8.5000 in ) Sd =36609.6161 mm^2( 56.7450 in^2) Vas = 66.5281 L ( 2.3494 ft^3) BL = 1.9067 N/A Mms = 34.7146 g Cms = 349.4218 uM/N Kms = 2861.8704 N/M Rms = 2.2538 R mechanical Efficiency = 0.4704 % Sensitivity= 88.7426 dB @1W/1m Sensitivity= 101.1220 dB @2.83Vrms/1m The analysis at the bottom of the page goes beyond my level of understanding, but they have a nice write up on how to interpret the results. http://medleysmusings.com/category/s...ding-the-data/ |
Pac oem-1
Hey guys, this feels like the right time to resurrect the thread :)
My question is simple. I have the Bose HU and I want to add an amplifier. I found some LOCs that accept differential input. But if possible, I would like not to splice/tap any cables and leave everything intact. The PAC OEM-1 seems like the perfect solution for this. BUT - They say it does not work with Bose amps. Has anybody actually tried it in the RX8? On this forum some people say they've used it, but in another thread (the LOC discussion) they say the wiring is not fit for the Bose. So: Has anybody used the PAC OEM on the RX8 Bose successfully? Thank you. |
Originally Posted by Maanghod
(Post 4890035)
Hey guys, this feels like the right time to resurrect the thread :)
My question is simple. I have the Bose HU and I want to add an amplifier. I found some LOCs that accept differential input. But if possible, I would like not to splice/tap any cables and leave everything intact. The PAC OEM-1 seems like the perfect solution for this. BUT - They say it does not work with Bose amps. Has anybody actually tried it in the RX8? On this forum some people say they've used it, but in another thread (the LOC discussion) they say the wiring is not fit for the Bose. So: Has anybody used the PAC OEM on the RX8 Bose successfully? Thank you. But you can always make your own T-harness using Metra's 71-7903 and 70-7903. You could also use something like this https://www.ebay.com/i/172805936005. And then depending on your amplifier, you can run the output of the head unit directly into the RCAs of the amp. |
All times are GMT -5. The time now is 04:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands