eXentric

Many users on this board have expressed an interest in adding after-market displays to their RX8s. Many of those users (including myself) wish to keep their stock head unit. This leaves us with no choice but to pay someone a large fee to do a custom placement of the display. Until now, this has kept me from starting on my carputer project. But as of today I think I have a good solution.

As most of you know, the display for the stock navigation unit stows itself in the dash above the red display. This means that for those of us that don’t have the nav, there is plenty of space left up there. With overLOADs pending delivery of his custom AUX module, several of us have thought about adding a 1-DIN slot where the stock nav display would normally go. This DIN could be used for adding an in-dash DVD player, an Equalizer, an XM radio, or in my case a retractable touch-screen for my carputer.

With several 1-DIN displays now on the market, many of which are under $500, this becomes a very cost-effective alternative to the stock nav. Especially when you consider that many of these displays are motorized, far higher resolution and even have USB touch support.

This idea is not a new one; in fact many of us have already seen pictures of someone in Japan that did exactly that. But at least one RX8 Club user felt it looked awkward. In my opinion, the install is flawed because of the use of vinyl as the covering. Vinyl could never cover the display hole entirely and therefore the person had to use felt and it didn’t end up being clean. But if the whole piece could have been done in the exact original texture of the dash with the exact dash color, OR if the piece could be made in the same shiny glossy black as the head unit and other areas of the car, I feel the install would have looked far cleaner. And that is what I am proposing here.

RotaryGod introduced me to a local Houston company called TwistedInteriors and I met this afternoon with the company owner. TwistedInteriors specializes in end-to-end automobile customization, but they focus mainly on exactly the kind of part that I’m interested in having fabricated.

Both RotaryGod and I know the owner of the company personally. After visiting with him for several minutes and explaining exactly what I wanted to accomplish, he set a price of 350 to 400 dollars (which is out of most peoples budget including myself). However, since the bulk of this price is due to the time and effort required to fabricate the initial mold, he promised to make RX8 Club members a deal of 150 dollars completed and painted if there are at least three users (aside from myself) that are interested in the part.

If you are interested, please post that you’re interested here and then PM me for more information. With TwistedInteriors current work queue, the owner informed me that they could have these pieces available for shipping within a few weeks from the four-person order. I can lock in a more precise date when I have at least four orders.

Below I’m including photos of a few 1-DIN display options as well as what the 1-DIN slot would look like in an RX8. Please keep in mind that the photos of the RX8 are NOT THE WORK OF TWISTEDINTERIORS. Their work would be much more professional.

eXentric

Sample Installation Pic (NOT WORK BY TWISTED INTERIORS)

eXentric

Close up (remember work would be much more clean)

eXentric

The 1-DIN display I'm going with.

Here is the link to the display at DigitalWW.com.

eXentric

Another option. This one's motorized. Both displays have USB touch and at LEAST 800 x 600 res.

Here is the link to the display at DigitalWW.

eXentric

Just a shot of the space available in the dash in this area. This picture is borrowed from jdaled's Kenwood Music Keg install.

Outlaws eXtreme

If you can get a picture of what the final product would look like, I would definitely place an order. I wanted to put in my Alpine unit into that similar slot... along with my Nav Alpine in the rear of the car.

eXentric

There won't be any final picture of the product until at least four orders are placed. But I will post pictures here when mine is completed. I can't post any pictures yet, obviously, because it doesn't exist. All I can asy is that it will look better then what you see in the pictures above.

jniamehr

So the price is 150? And what we are getting for 150 would be a new top (on top of the red display) with a 1 din slot, painted to match the rx-8 interior exactly? From the time 4 people are on board how long would this take to complete? Also excentric can you give me the brand and model of the 1 din display you are going with, and a link to specs of it? How much is it costing you? Im also interested in the motorized one as well, this is really appealing to me... What nav are you going with? I think I will go with http://www.deluo.com/Merchant2/gps_for_laptop.php either a hard wired or a bluetooth reciever with the routis software (it looks touch screen friendly)

Last question what kind of install are we looking at... on a scale of 1 through 10 1 being easy 10 being very very dificult

eXentric

That is correct. TwistedInteriors gave me two options for the finish.
[list=1][*]They reproduce the exact texture and exact color of the dashboard that's already in our RX8s. In other words, you wouldn't be able to tell it wasn't a stock option.[*]They would make the piece in super-high-gloss black to match the factory head unit, the power-window panels on the door and other various high-gloss areas in the cabin.[/list=1]

The four of us would have to agree on the finish because the finish determines the mold. That's not to say that a second mold couldn't be made later, but that would require another four individuals interested in that second texture.

My vote (and I'm hoping that three people will agree with me) is to have the same finish and color of the existing dash. I think the black-gloss would look cool too, but I think it wouldn't look as stock and that's the look I'm going for. HOWEVER, having said that, if three other people want the black gloss finish, I'll take the same so we can get it done.

As for the displays, I went back and updated the image captions for both displays to take you directly to the page where you can buy them. I've been shopping at Digital World Wide, so you can check out their entire inventory. They have several displays that are even cheaper then those two if you don't need high-res or don't need touch. I happen to want both.

Regards,

eXe

eXentric

Sorry I forgot to answer your question on time.

He couldn't give me an exact date because of the way their business works. It's basically a walk-up business so their workload changes. However, he told me that when we get four people committed, he'd nail down a more final date for us.

I don't expect this to take longer then three or four weeks. But I don't want to put words in his mouth. If four of us are interested but it has to be within a timeframe, I can communicate that with him also.

They are a professional business and this is what they get paid to do, so it's not like they would put us on the back burner or anything.

eXe

Outlaws eXtreme

But I thought you were going to get the first test model, so that we can see what the mold would look like?

Or is it 3 additional people have to buy this along with you without first looking at this product?

jniamehr

Another question how will you be going about installing your nav and carputer etc?

Im almost on board

eXentric

That is correct. If the pictures and a guarantee that it will be better quality then what you see are not enough for you, then do not get involved in the first batch. Perhaps you can get involved in the second batch after the first of us have paved the way for the rest.

Remember, the initial cost (300 to 400) is for the time and effort it takes to get the mold perfect. But he's willing to wave that cost if he's guaranteed four sales or more.

I plan to be installing a microATX either under the passenger seat or in the glovebox. But I can't afford the PC yet. I just purchased the display. So, for the first couple of months I will be using my laptop and that will probably sit in the passenger seat when no-one else is there.

I have a CF GPS card similar to this one with the external antenna. I'll mount the antenna next to the XM radio antenna. I plan to add XM radio by adding an XM PCR. The PC-based User Interface deffinately lends itself to a touch-screen. For additional music, I will either have a very large hard disk or I will hook up my external 120GB via USB2 or 1394.

You and I can talk more details over PM if you'd like. But I'd like to keep this thread on getting the dash piece fabricated.

eXentric

Forgot another response, sorry:

I would probably guess about a 3. It shouldn't be any harder to install then opening your existing dash and putting it back together.

You could probably just about follow these instructions from jdaleds music keg install. But it souldn't be too extremely difficult.

When I do mine, I'll be sure to document it step-by-step for everyone else.