When is the NEW MS kit comming out?
1 Attachment(s)
The following picture is basically the way I want my 8 to look, without some of the stuff that would take major changes.
Does anyone know when this kit is comming out? If anything, I just want the front fender and rear spoiler...I could always find something cheaper for the sides. |
Have no idea when it will be out, but I wouldn't mind picking up the front or the rear spoiler. Both look nice.
|
Oh yeah, I wouldn't mind the rims either.
|
Knowing Mazda's RIP OFF prices, it's probably going to cost me sleeping on the couch for a month or two.
Come on......NOCK OFF...lol |
Anybody ever figure out which rims those were?
|
I found identical ones, but not by the MS name.
Where are they now...I honestly have no idea. I went looking around and found them but I forget where...sorry. I'll check out my links at home and get back to you. They aint cheap I'll tell you that much. |
Originally Posted by Nemesis8
Anybody ever figure out which rims those were?
|
Yeah, I was just going to say the look like Advans to me. I believe Model 5 or something like that. VERY expensive.
|
the kit is pretty hot...minus those ugly ass strakes and the chrome gas cap..haha
|
They're listed here - http://www.poweraxel.com/mazdaspeed/...006/ms001.html
Also, check page 5 and 6 in this thread - https://www.rx8club.com/showthread.p...aspeed%22+rims |
Thanks - I missed that post earlier
|
Size 18×8.0J +50
Part #QSE1 3K G50 Price 47,250 Yen Conversion of Yen 47,250 Japanese Yen = 401.338 US Dollar Is that true? Only $400 each?? |
I wonder if they offer wider sizes.
|
No prob.
Originally Posted by Nemesis8
Is that true? Only $400 each??
|
$400 is a bit too much for me, but they look sooooo goooodddddd....
|
I'd like to know when, if ever, it's coming out too. I want to be able to decide on just getting the appearance package or getting that. I don't think the current Mazdaspeed kit looks all that great, especially in red.
|
yup !
those rims are friggin hot |
I think the Advans are about $600 per wheel, or so.
|
I think the Advans are about $600 per wheel, or so. Yeah, those are the ones I found and YES...they are way too pricy. I think this either new or concept MS kit is nicer than the current one also, It's more aggressive...tough looking. But...that's why I started this thread, I have yet to hear they are going to build this kit. |
I'd like to check out the rear bumper and rear lip spoiler. Don't really like the new fenders.
|
Yeah, the fenders is not a change I'd do...I just want the front fender and rear spoiler (which I suspect is the Euro spoiler but I don't know), and if I sell enough stuff on eBay the rims also...lol.
|
I like the spoiler....why only 18" why don't they make it 19".The rim look nice
|
that C6 front end is as about as bad as the rx8 style front end they sell for civics...
|
I think it looks better than all kit's out there today, so I hope they build it.
|
BUMP....any NEW....NEWS on this?
|
Rims
1 Attachment(s)
|
i bet they are SUPER Expensive
|
Mazdaspeed Aluminum Wheel 18" + 50
QSE1 3K G50 45,000 Yen |
i like the fenders and lip spoiler. Those rims are nice but only if they came in gunmetal.... it would of been more of a plus if they where 19's too. Maybe i'll get a set and powerder coat them. haha
|
So is that spoiler available yet? Anyone know? Thanks
|
I was looking through the new Super Street mag and I saw then as Advan T5 but I can't find a picture of them on line.
|
Those rims are so nice...but yeah, they will probably want your first born for them.
I know it's probably me, but why does Mazda take so long? Come on...sell the spoiler already... |
Originally Posted by rx8wannahave
Yeah, the fenders is not a change I'd do...I just want the front fender and rear spoiler (which I suspect is the Euro spoiler but I don't know), and if I sell enough stuff on eBay the rims also...lol.
|
Originally Posted by Japan8
It's not. Issue 029 has an article and lots of pics. It's entirely different... more aggressive and the center section of it is adjustable (think of flaps on an airplane wing). The interior has been redone as well with a body colored center console (instead of stock silver, shinka piano black, or old MS CF), MS shifter (new one also used in the MS parts for the MX-5), suspension and a few other toys. Rear is a new rear bumper (not just cut and bolt-on section like now) with a sharp-looking diffuser (totally different than current MS one) and Ti tip exhaust.
Those rims would look sweet in gunmetal. |
I'd like a pic of the lip spoiler and rear. That is all. :)
|
It's not. Issue 029 has an article and lots of pics. It's entirely different... more aggressive and the center section of it is adjustable (think of flaps on an airplane wing). The interior has been redone as well with a body colored center console (instead of stock silver, shinka piano black, or old MS CF), MS shifter (new one also used in the MS parts for the MX-5), suspension and a few other toys. Rear is a new rear bumper (not just cut and bolt-on section like now) with a sharp-looking diffuser (totally different than current MS one) and Ti tip exhaust. |
Originally Posted by devious12
ummm.. by any chance do you have a link for that or a pic scanned?
Those rims would look sweet in gunmetal. What's funny is that the MS concept car has 19" rims, but these that are offered by Mazda (JDM) are only 18"... |
Originally Posted by rx8wannahave
What mag...oh man, I really would love to see this.....Issue 029 of what mag?
|
Unfortunately RX-7 Magazine (JDM) is not available online and I didn't buy that issue (hey they're like $20 an issue)... even if I did, I don't have a working scanner. What's funny is that the MS concept car has 19" rims, but these that are offered by Mazda (JDM) are only 18"... |
The MS concept had Advan 5's on it, not the new MS wheels, which do look similar (twin 5 spoke). Maybe the MS wheels were not produced in time for the Tokyo Auto Salon so they went with a similar wheel. The new MS wheels do look nice though, I'm waiting to see some good pics of them on an 8.
|
Originally Posted by rx8wannahave
Dang it...that sucks. Maybe I should mail you a scanner...lol.
|
Win2K huh....time to go look on newegg.com....and eBay. I wonder how much the shipping cost would be?
|
Mazda needs to do a MS hood.
|
Originally Posted by DOMINION
Mazda needs to do a MS hood.
|
Originally Posted by rx8wannahave
Those rims are so nice...but yeah, they will probably want your first born for them.
|
my thinking is, if they come out with this kit... maybe they'll lower the prices on the original
:) I just think the new one looks too much like that weird chrysler sports car |
Originally Posted by Japanparts.com
About US$2,100 a Set of Four, on your doorstep
Graham Ware Export Manager *Since 1996* |
You can already get the kit - check out this topic... https://www.rx8club.com/series-i-exterior-appearance-body-kits-27/interest-rx-8-mazdaspeed-prototype-front-bumper-101385/page3/
|
by the way guys, accolade makes a knock off of the front and the fenders
|
All times are GMT -5. The time now is 12:00 PM. |
© 2024 MH Sub I, LLC dba Internet Brands