Side trim falling off!
2 Attachment(s)
Hey all. I have a piece of side trim falling off on my car and have ZERO experience with body trim. Any advice on the best methods to reattach this would be very appreciated!:fingersx:
|
Is this the aero package side from Mazda? What I would do it remove the black plastic from the bottom, remove the bolt and pull it off. It should have some holes in the side of the body where it goes in. Remove all the double sides tape, and clean up with some alcohol. Then apply new 3M automotive double sided tape to the part that is falling off. Let it sit atleast an hour. Peel the other side of it and put the part back on the car. Have a friend hold it in place firmly while you put the plastic clips and bolt in. Should be good as new.
|
Originally Posted by vy_MR2
(Post 4274616)
Is this the aero package side from Mazda? What I would do it remove the black plastic from the bottom, remove the bolt and pull it off. It should have some holes in the side of the body where it goes in. Remove all the double sides tape, and clean up with some alcohol. Then apply new 3M automotive double sided tape to the part that is falling off. Let it sit atleast an hour. Peel the other side of it and put the part back on the car. Have a friend hold it in place firmly while you put the plastic clips and bolt in. Should be good as new.
|
Have you tried super glue? It works wonders.
|
Originally Posted by monchie
(Post 4277034)
Have you tried super glue? It works wonders.
|
All times are GMT -5. The time now is 01:00 PM. |
© 2024 MH Sub I, LLC dba Internet Brands