Notices

Paintless Dent Removal

Old Jan 31, 2007 | 12:33 AM
  #1  
Phantom Menace's Avatar
Thread Starter
II SOCIETY
 
Joined: Nov 2006
Posts: 1,077
Likes: 0
From: The Bay Area
Paintless Dent Removal

Hey guys,

About a week and a half ago, I took my car to Midas to get some work done. I wrote a "venting" thread about it. Well it turns out that they also put a dimple dent on my right rear fender. Ofcourse, they are denying it. Fortunatley for me, I took some pics of the car right before they started to work on it. Initially, I wanted to do some before and after pics to post on here.

Anyways, I called this guy--Dent Xpert--and he uses little hammers and pics to pound out dents from the inside out. He came to my house and took only about a half an hour. It cost me $85.00, which I'm trying to have Midas reimburse me for, and it's flawless now. No sign of anything! Not a ripple, nick, or distortion in the paint or the relfections in the paint. He did, however, drill a 7/16" hole, which he later plugged, behind the wheel cover (inside the wheel well) in order to get his tools inside the body cavity.

I've never heard of "Paintless Dent Removal" before and I'm now a believer! So much cheaper and convenient than going to a body shop, who'll drill a hole or tack weld on the dent and paint over. If anyone in the SF Bay Area is interested in having some dings or dents removed at a fraction of body shop prices, his email is:

dentexpert@mac.com

He's mobile and works very fast. I've seen some of the other stuff he's done, he can even do much larger dents. I think the only limitations on this method is when the paint is damaged or the metal streches...

Last edited by Phantom Menace; Jan 31, 2007 at 10:46 PM.
Reply
Old Jan 31, 2007 | 11:09 AM
  #2  
XDEEDUBBX's Avatar
RX8 HA HA
 
Joined: Aug 2003
Posts: 11,772
Likes: 5
From: Gardena Cali 310
I got mine done by dent wizard a year and a half ago. It truely is amazing! Hope u get reimburesed.
Reply
Old Jan 31, 2007 | 01:30 PM
  #3  
New Yorker's Avatar
Registered
 
Joined: Sep 2003
Posts: 3,319
Likes: 58
From: NYC
I'm a HUGE fan of PDR! To think they can remove little dings like that—like they were never there—and NOT have to repaint—I still can't believe it! Door/fender dings use to drive me absolutely crazy—now I just shrug my shoulders, think "no big deal" and take it to Dent Wizard.
Reply
Old Jan 31, 2007 | 01:47 PM
  #4  
LostAngel's Avatar
Registered User
 
Joined: May 2005
Posts: 685
Likes: 0
Dent Doctor in Erie PA fixed my door ding this summer. Looks perfect!!
Reply
Old Jan 31, 2007 | 01:51 PM
  #5  
dupa12345's Avatar
Registered User
 
Joined: Dec 2005
Posts: 375
Likes: 0
From: Chicago
i need a guy like that in chicago
Reply
Old Jan 31, 2007 | 05:50 PM
  #6  
Phantom Menace's Avatar
Thread Starter
II SOCIETY
 
Joined: Nov 2006
Posts: 1,077
Likes: 0
From: The Bay Area
The little dents are the worse! Big-As$ dents are so overwhelming that you know you have to either replace the body part or take it to the body shop. And ususally its so expensive you can go with your insurance company and pay a deductable. With these little dimple fu@kers, sometimes the deductable would be more than the actual damage. When the dent was there, I didn't want to clean my car...I didn't even want to look at it. Though it was small--it slayed me everytime the light caught it just right and screamed out "IMPERFECTION!" $85, for me, was definatley worth it to get rid of that dent.

When it was done...I felt as if a huge weight had been lifted. All I need to do now is chase Midas around to fix my rims and pay me back for the dent.


Dub,
Thanks man--I hope so too! Its not really so much for the $85...well yeah it is about the $85. But, "there's principalities involved!" Ya'know?!
Reply
Old Jan 31, 2007 | 07:29 PM
  #7  
solito77's Avatar
Registered User
 
Joined: May 2006
Posts: 95
Likes: 0
From: FLA
Are those "Dent Wizards" located in FLA? ...Ive been driving around with a couple of dings too long and something like $85 dollars I'll call tomorrow. Good luck on that Menace.
Reply
Old Jan 31, 2007 | 10:39 PM
  #8  
Phantom Menace's Avatar
Thread Starter
II SOCIETY
 
Joined: Nov 2006
Posts: 1,077
Likes: 0
From: The Bay Area
Originally Posted by solito77
Are those "Dent Wizards" located in FLA? ...Ive been driving around with a couple of dings too long and something like $85 dollars I'll call tomorrow. Good luck on that Menace.
Thanks brother! You know, I don't know about FL. If you guys have a "craig's list" or some community site, check under auto services or "paintless dent removal." These guys are may be associated with some body or detail shops. Small dealerships also employ them to "pretty-up" their inventory. However, some bodyshops will refuse to validate them as PDR guys take most of their smaller business. You can also check the yellow pages. But most PDRs, that I have recently been hearing about, are small businesses like mobile tinters and such. The going rate, here in the SF Bay Area, is about $80-100 for the first dent and something like $40-$50 for each additional dent.

If you do find one, try to get it done during the winter time. Summer is real busy for these guys, so the Dent Xpert in my area has told me, because that is when most people want to shine up and detail their cars.
Reply
Old Jan 31, 2007 | 11:42 PM
  #9  
d j's Avatar
d j
hukbong himpapawid
 
Joined: Aug 2006
Posts: 689
Likes: 1
From: Schwedelbach, Germany
..cool, I might try this out =)
Reply
Old Feb 1, 2007 | 11:18 AM
  #10  
Transam kid 01's Avatar
The anti-ricer
iTrader: (1)
 
Joined: Oct 2005
Posts: 1,888
Likes: 0
From: Hillsdale, NJ
Got mine done by a friend at a body shop. Bout quarter sized dents taken out. He charges $75 a piece.
Reply
Old Feb 1, 2007 | 06:36 PM
  #11  
chickenwafer's Avatar
Nope
iTrader: (9)
 
Joined: Jan 2007
Posts: 3,312
Likes: 0
From: Denver
Had this done on my bike when I laid it down (the gas tank). Awesome stuff.
For any 8 owners in AZ that need some PDR, here's a good place: http://www.azdentrepair.com/ mobile and less than an hour

Dave
Reply
Old Feb 1, 2007 | 06:41 PM
  #12  
Napboy's Avatar
Sho'Nuff
 
Joined: Jul 2003
Posts: 632
Likes: 1
From: San Diego
Just out of curiosity, how does he get behind the right rear fender?

I had a ding taken out of my door for $50 and he did a great job. I didn't see him do it, but I assumed the took the door panel off to get behind the dent.
Reply
Old Feb 1, 2007 | 07:19 PM
  #13  
QBallz's Avatar
Registered User
 
Joined: Jan 2005
Posts: 522
Likes: 0
From: Visalia, CA
The paintless dent remove is amazing. Some kid ran into the back of my wifes Mazda3 with a bike. It put a 2" dent on the rear pillar of the hatch back, and dented the rear quarter panel quite badly.

Took them 2-3 hours of work but they popped them all out perfect.
Reply
Old Feb 1, 2007 | 09:59 PM
  #14  
Phantom Menace's Avatar
Thread Starter
II SOCIETY
 
Joined: Nov 2006
Posts: 1,077
Likes: 0
From: The Bay Area
Originally Posted by Napboy
Just out of curiosity, how does he get behind the right rear fender?

I had a ding taken out of my door for $50 and he did a great job. I didn't see him do it, but I assumed the took the door panel off to get behind the dent.
He jacked the right rear wheel up and removed the wheel liner. Then, he drilled a small hole from under the wheel well, about 7/16" then he plugged it.
Reply
Old Feb 1, 2007 | 10:15 PM
  #15  
NgoRX8's Avatar
Registered
iTrader: (1)
 
Joined: Oct 2004
Posts: 10,239
Likes: 4
From: CA, Rowland Hts.
i had a dent on my door fixed by paintless dent removal, they went through the window opening.

paintless dent removal is amazing.
Reply
Old Feb 2, 2007 | 08:47 AM
  #16  
New Yorker's Avatar
Registered
 
Joined: Sep 2003
Posts: 3,319
Likes: 58
From: NYC
Originally Posted by dupa12345
i need a guy like that in chicago
You can find PDR in Chicago, Florida… virtually anywhere new cars are sold. New car dealers routinely use PDR to remove tiny dings on new cars that haven't been sold yet. (And after hailstorms!) In fact, PDR guys tell me the lion's share of their business—by far—comes from dealerships. So if you can't find a PDR place with Google, the Yellow Pages or craigslist, call a couple of dealers in your area and they'll probably tell you who they use.
Reply
Old Feb 2, 2007 | 09:09 AM
  #17  
jskup1's Avatar
The Chief
iTrader: (7)
 
Joined: Jun 2005
Posts: 827
Likes: 0
From: Virginia Beach, VA
I've used Dent Wizard a few times on a couple of our cars and they are amazing. That would be a great skill to learn and do on the side.
Reply
Old Feb 2, 2007 | 03:39 PM
  #18  
kwescott's Avatar
One ball, corner pocket
 
Joined: Apr 2004
Posts: 2,053
Likes: 1
From: Fontucky, right next to Patriotville
had some damage from a floor jack at a local mazda dealer...they denied everything, but offered to provide me with a discount for using the collision place they use. Went there, and was going to be nearly 800 dollars, along with the two days I would be without my car.

Gave up.

Then saw a PDR guy locally, he was able to remove the dent in the fender, along with various other door dings I have collected over the last two years. For 2 hours of his time, he charged me 125.

+1 for PDR. They really can do some amazing things, and save you that heart ache of dropping your car down at a plce, where it will remain outside overnight, and potentially get overspray on your wheels and nice shiny exhaust.
Reply
Old Feb 3, 2007 | 02:52 AM
  #19  
NgoRX8's Avatar
Registered
iTrader: (1)
 
Joined: Oct 2004
Posts: 10,239
Likes: 4
From: CA, Rowland Hts.
800 bucks... what a rip off. this is why i hate taking the car to the dealer.
Reply
Old Feb 3, 2007 | 09:00 AM
  #20  
New Yorker's Avatar
Registered
 
Joined: Sep 2003
Posts: 3,319
Likes: 58
From: NYC
The best thing about PDR is not having to paint. Getting to keep the original factory paint is huge, I think.
Reply
Old Feb 3, 2007 | 02:39 PM
  #21  
kwescott's Avatar
One ball, corner pocket
 
Joined: Apr 2004
Posts: 2,053
Likes: 1
From: Fontucky, right next to Patriotville
Originally Posted by NgoRX8
800 bucks... what a rip off. this is why i hate taking the car to the dealer.
I think the break down was something like 200 bucks in paint/materials...and another 600 for removal/install.
Reply
Old Feb 3, 2007 | 07:35 PM
  #22  
Phantom Menace's Avatar
Thread Starter
II SOCIETY
 
Joined: Nov 2006
Posts: 1,077
Likes: 0
From: The Bay Area
Originally Posted by jskup1
I've used Dent Wizard a few times on a couple of our cars and they are amazing. That would be a great skill to learn and do on the side.
I was thinking the exact same thing. Someone here was selling some of the pics and hammers--for cheap too. The guy who did my car told me that there are some "schools" that specialize in PDR. On the side would be cool, but you gotta think about it. Most of you clients would be family/friends that you may not want to charge too much. The guy who fixed my car does it full-time and makes a cool living off of it. I think he does something like 4-8 cars a day. At about a bird a pop...that's an average of $12K a month before taxes for a 5 day work week...

*Whistles* Not a bad living, indeed...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jst4fun
RX-8 Parts For Sale/Wanted
18
Apr 17, 2021 07:43 AM
fourwhls
RX-8's For Sale/Wanted
7
Feb 20, 2019 05:16 PM
Racingjunkie
Series I Wheels, Tires, Brakes & Suspension
2
Sep 29, 2015 05:05 PM
xAgyex
RX-8 Parts For Sale/Wanted
0
Sep 28, 2015 08:54 AM
Learners_Permit
Series I Interior, Audio, and Electronics
8
Sep 27, 2015 07:38 PM


Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 07:37 AM.