My Custom Led Tails: Should I Make And Sell???
#1
My Custom Led Tails PICS!! Should I Make And Sell???
Okay guys. I made them. Custom LED Tails. They turned out great. So great that I'm thinking about making them and selling them. However, they are VERY time consuming. That's why if I was to make them, I'd probably have to charge about $450 per set (that is with you sending me your tails and me converting them). The price would include all the necessary equipment and me shipping them back to you. You would have to pay for shipping to me. I haven't decided if I'm going to do it yet I just want to see what kind of interest this would spark. The outer ring would be your driving lights and the middle would be the brake light. The reverse and turn signal would be an easy swap that you could do on your own by purchasing LED replacement bulbs. Let's see who is interested. Here are the pics.
Last edited by RX8 Driver 1; 05-20-2008 at 03:46 PM.
#4
#6
503wtq Boosted Bimmer
iTrader: (2)
Join Date: Oct 2004
Location: Los Angeles, California
Posts: 3,038
Likes: 0
Received 0 Likes
on
0 Posts
I'd like to see a schematic. Are they regulated? Are you using a PWM for the brightness control? What make and model are the leds? Did you make the proto board yourself, use copper clad, or did you have it pre-made?
Pictures of the circuit would be nice too.
Also, no drop in reverse led will be bright enough.
Pictures of the circuit would be nice too.
Also, no drop in reverse led will be bright enough.
#7
Registered Lunatic
iTrader: (1)
Your lights look very nice, but since they are so time-consuming to make and thus expensive, I'm not sure they'd be worth $450+shipping plus the downtime while they are being shipped and converted.
Don't get me wrong, I admire you for being able to tackle a project like this and the result is excellent, but by replacing the bulbs with something like these, the effect will be still pretty good, and for a lot less cost. And such a replacement is necessary anyway for the turn signals and reverse lights to have an all-LED solution.
On the other hand, there will probably be a few people who are willing to do this just to be different
Again, kudos for the great work.
Don't get me wrong, I admire you for being able to tackle a project like this and the result is excellent, but by replacing the bulbs with something like these, the effect will be still pretty good, and for a lot less cost. And such a replacement is necessary anyway for the turn signals and reverse lights to have an all-LED solution.
On the other hand, there will probably be a few people who are willing to do this just to be different
Again, kudos for the great work.
Last edited by Tamas; 05-22-2008 at 03:39 PM.
#8
Rodger, your lights look very nice, but since they are so time-consuming to make and thus expensive, I'm not sure they'd be worth $450+shipping plus the downtime while they are being shipped and converted.
Don't get me wrong, I admire you for being able to tackle a project like this and the result is excellent, but by replacing the bulbs with something like these, the effect will be still pretty good, and for a lot less cost. And such a replacement is necessary anyway for the turn signals and reverse lights to have an all-LED solution.
On the other hand, there will probably be a few people who are willing to do this just to be different
Again, kudos for the great work.
Don't get me wrong, I admire you for being able to tackle a project like this and the result is excellent, but by replacing the bulbs with something like these, the effect will be still pretty good, and for a lot less cost. And such a replacement is necessary anyway for the turn signals and reverse lights to have an all-LED solution.
On the other hand, there will probably be a few people who are willing to do this just to be different
Again, kudos for the great work.
#9
503wtq Boosted Bimmer
iTrader: (2)
Join Date: Oct 2004
Location: Los Angeles, California
Posts: 3,038
Likes: 0
Received 0 Likes
on
0 Posts
I'd like to see a schematic. Are they regulated? Are you using a PWM for the brightness control? What make and model are the leds? Did you make the proto board yourself, use copper clad, or did you have it pre-made?
Pictures of the circuit would be nice too.
Also, no drop in reverse led will be bright enough.
Pictures of the circuit would be nice too.
Also, no drop in reverse led will be bright enough.
^... we're not all led illiterate. Lets see the schematic. Without some type of voltage or current regulation these will not last long.
#11
Asshole for hire
iTrader: (1)
Join Date: Jun 2006
Location: Colfontaine, Belgium
Posts: 3,214
Likes: 0
Received 3 Likes
on
3 Posts
Rodger, sending you a PM, couple questions...
#17
Registered
iTrader: (1)
Join Date: May 2007
Location: Central PA
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
careful...no offense but I bought some led tails off of a forum member (no longer here) because rasp was no longer making them, i dropped a few hundred for tails that had leds burn out or act weird within 2 weeks...no way of getting my money back...rasp would you make some led tails out of pity for me
#23
Thread
Thread Starter
Forum
Replies
Last Post
DVerdeyen
RX-8 Parts For Sale/Wanted
10
08-31-2015 10:41 PM
CARBONRX-8
RX-8 Parts For Sale/Wanted
1
08-23-2015 09:52 PM
philip53
RX-8 Parts For Sale/Wanted
1
07-30-2015 04:18 AM