MS Side Skirt Installation -- Is this right?
#1
Registered User
Thread Starter
Join Date: Oct 2003
Location: Indianapolis, IN
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
MS Side Skirt Installation -- Is this right?
So I had my side skirts installed by my Mazda dealer. They removed my Aero Flares, and then installed my new side skirts. The skirts have an adhesive foam, rather than 3M adhesive tape on the sides. I have attached a picture of the gap that appears on the top of the skirt. Its not really noticable unless you are looking at it. But my question to those of you with the MS side skirts is.... Does yours have this much of a gap? The black foam is more like weather stripping, and by no means are the skirts going to fall off, I just want to know if this is normal. I took it to a local body shop, and they said that when you have skirts like that, it is normal for them to pull apart on longer runs like that. That is why they installed the foam, instead of the 3M tape. I happen to know from personal experience that 3M tape doenst hold up all that well on larger pieces of trim. Thoughts?
#4
Registered User
Thread Starter
Join Date: Oct 2003
Location: Indianapolis, IN
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
I need to call that law firm you work for and let them know what you are doing while they are paying you. Please reserve this spot for people who have REAL replys mister visor decal remover.
=P
=P
#5
Originally Posted by flyboyindy
I need to call that law firm you work for and let them know what you are doing while they are paying you. Please reserve this spot for people who have REAL replys mister visor decal remover.
=P
=P
#7
if your not 1st your last
lol dont forget the airplane vomit bag's
frank i think they give it a edge (get it ) lol
those skirts look good on the car, as long as they are on there good i wouldnt worry
hey what did your local dealer charge you for the install and how long did it take them ?
frank i think they give it a edge (get it ) lol
those skirts look good on the car, as long as they are on there good i wouldnt worry
hey what did your local dealer charge you for the install and how long did it take them ?
#9
Raced with Joy & Abandon
Join Date: Jul 2004
Location: Indy
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by flyboyindy
So I had my side skirts installed by my Mazda dealer. They removed my Aero Flares, and then installed my new side skirts. The skirts have an adhesive foam, rather than 3M adhesive tape on the sides. I have attached a picture of the gap that appears on the top of the skirt. Its not really noticable unless you are looking at it. But my question to those of you with the MS side skirts is.... Does yours have this much of a gap? The black foam is more like weather stripping, and by no means are the skirts going to fall off, I just want to know if this is normal. I took it to a local body shop, and they said that when you have skirts like that, it is normal for them to pull apart on longer runs like that. That is why they installed the foam, instead of the 3M tape. I happen to know from personal experience that 3M tape doenst hold up all that well on larger pieces of trim. Thoughts?
If you need pics to go back to the dealer with to show them how it is "supposed to look" let me know and I'll send them along.
#10
Originally Posted by goforwand
I have no gap or any of the foam showing at all. When I pressed the fasteners into the holes drilled from the templates, the fit was very snug. I'm not sure how the other guys that did the MS DIY sideskirts look, so you may want ask for some other opinions.
If you need pics to go back to the dealer with to show them how it is "supposed to look" let me know and I'll send them along.
If you need pics to go back to the dealer with to show them how it is "supposed to look" let me know and I'll send them along.
BTW Frank MS sides look Hot!
Thread
Thread Starter
Forum
Replies
Last Post
dmengel
RX-8 Parts For Sale/Wanted
10
02-16-2016 09:47 PM
DVerdeyen
RX-8 Parts For Sale/Wanted
10
08-31-2015 10:41 PM
Jazzmeson
RX-8 Parts For Sale/Wanted
1
08-30-2015 02:23 AM