RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Exterior Appearance and Body Kits (https://www.rx8club.com/series-i-exterior-appearance-body-kits-27/)
-   -   MS Bodykit info........newbie! (https://www.rx8club.com/series-i-exterior-appearance-body-kits-27/ms-bodykit-info-newbie-88419/)

Btturbo 04-25-2006 11:34 PM

MS Bodykit info........newbie!
 
Want the MS kit sideskirts, front, and rear bumpers. Where is the best\cheapest place to buy it? Please don't say from mazdaspeed.com!

Also, self install?

IZoomZoomI 04-25-2006 11:42 PM

try those vendors on top. Click on mazdaparts.com and you have your answer. It's okay to post newbie questions, but try exploring the site a little bit, and if you can't find it then make a thread about it and someone will help you out. But normally a little clicking here and there will find your answer.

swoope 04-25-2006 11:45 PM

if you want the correct fitting install it yourself the ms kit is the way to go....

but there is no cheap involved... you get what you pay for..


beers :beer:

FABRO 04-26-2006 02:40 AM

mazdaspeed.com is the only site I found that was one of the cheapest to buy the MS kits from compared to the other vendors on this forum.

scsi 04-26-2006 05:47 AM

is the extreme dimensions replica really bad?

http://www.andysautosport.com/produc...13&_v=vmd00283

ftwmcmillan 04-26-2006 10:18 AM

Mazdaspeed kit is not cheap, but it is worth it in my opinion. If you buy a replica you better have a good bodyshop to get the paint to match and fitment issues.

Whitey 04-26-2006 11:54 AM

I'm with Swoope........ there's nothing cheap about the real MS kit, but you get what you pay for. I installed mine myself and had absolutely NO fitment issues and the paint matched 100%.

pikachu 04-26-2006 04:00 PM

I was at a body shop today and saw an 8 there getting a replica kit put on. I ask the installer about it and he said the guy paid 1,000 for the kit and the fittment was so poor that they were charging him 2,500 for the install. That is worth the real MS kit right there. The only issue I have about the MS is the sides. The 3M tape didn't hold so well, and had I known that before I did the install then I would have reinforced it then.

pikachu 04-26-2006 04:06 PM

FWIW this is the cheapest place I found, and he is a forum vendor and has great service.

scsi 04-26-2006 10:58 PM

does the genuine kit come painted?

swoope 04-27-2006 01:08 AM


Originally Posted by scsi
does the genuine kit come painted?

it can, and that is the whole point of the kit.... fits with no mods, and paint matched..

beers :beer:

scsi 04-27-2006 05:03 AM

awesome, i checkd out that site posted, $2688 + shipping, and i believe its painted. thats for 4 pieces (no wing)

mikeschaefer 04-27-2006 09:32 PM


Originally Posted by pikachu
FWIW this is the cheapest place I found, and he is a forum vendor and has great service.

Great find, I almost thought you were smoking something at first because I was looking at the msrp. But then I saw the real price and the fact that shipping is free. That beats my previous best find (Rosenthal), and the dealer where it came up to about $3500 total. $2700 is a little easier to swallow considering the outstanding fit.

Btturbo 04-27-2006 11:09 PM

Great info everyone, definately go with the REAL MS kit.

RX-Hawk 04-28-2006 08:01 AM

Lets not have any illusions, the "genuine" Mazdaspeed kit does have its share of quality problems. The side skirts have problems of separating off the body (clips breaking and tape not holding). When you get the front nose be sure to tighten the middle grill and make sure the clips with the double-sided tape are actually tightly in place, use pliers to clamp the metal "twisties" snug through the mesh. I didn't do any of that when I first got it and I recently had to remove the bumper and fix the mesh that had come loose. Small gaps can happen with the back rear under spoiler as well, not much you can do if it turns out like that. And several people have had issues with the MS wing, a small gap between the trunk and lower portion of the wing on the right side. And if you have the dealer install it be sure to check and tighten all the nuts and bolts on it. One of my adjuster bolts came loose and fell out, and other people have had problems with the underneath the top portion of the wing coming out as well.


All times are GMT -5. The time now is 08:29 AM.


© 2024 MH Sub I, LLC dba Internet Brands