delhi

I got a pair of sideskirts (not the full lenght ones) and am wondering how difficult it is to install. It has all the brackets etc.... do i need double-sided tape and such? any drilling?

c0ldf1ame

iTrader: (5)

probably want to drill 2 metal screws inside each of the wheel wells, just 3M tape isnt enough to hold it in place,

totaleclipse

iTrader: (1)

i did this about a month ago. not too hard at all. check the diy there are good info on there. about 1 hr. each. and I got a use one with no instruction on templet

Alucard

what kind of sideskirts? what are they made from?

if there not MS they will prob have to be fitted.... FYI fitting fiberglass is a pain

delhi

it's the Appearance package side flares.

jmsinclair

I used the white glue from my kid's art class, seems to hold and if I get hungry I can eat it!

kersh4w

iTrader: (3)

https://www.rx8club.com/showthread.p...iy+side+flares

VASasha

iTrader: (5)

Just like I told you in the PM's that you sent me: use the 2 screws in the wheelwell and 3M tape for the rest. There are also clips underneath that hold it in place. It won't fall off.

You just need to start doing it and it'll make sense.

Although I am not saying that it's not possible to, it is very hard to screw this up.

VASasha

iTrader: (5)

that DIY linked is excellent, just skip the part about drilling holes in the side of your car. Without a template it may end up looking like swiss cheese.

delhi

Thanks for the link kersh4w. and thanks for the instructions VASasha!
Looks like you still need to drill a hole in the wheel well area too no? Looks like it from the instructions.