ok so i ordered some carbon fiber vinyl off ebay (48" x 24" sheet).
can be found here with different sizes available: http://www.ebay.ca/itm/260856777621?...84.m1439.l2649

this stuff looks pretty damn good for a vinyl with a textured surface.

Anyways, today was such a beautiful day in Toronto so i thought i'd go ahead and apply the vinyl to my B-Pillars. i have never done this before and it took me about 30 each side to apply.

below are some pics, let me know what you think

 

came out good.

 

Nice! looks good man. This looks like a good one day project for me to knock out.

 

So i finally went ahead and did this as well. I found the 2' x 4' wrap online for about $15. It's very simple to work with and I have plenty left over. I'm thinking about wrapping some interior pieces as well.

 

Looks good on silver and ti. CF is fine if you don't go overboard with it.

 

Agreed^

Id do this but with my hood, wing, and gas cover I think it'd be over kill.

 

CF is definitely good in small tasteful amounts.

 

nice mod looks good.

 

I completely agree with you guys. I won't be touching anything else on the exterior. Last thing I want is to be mistaken for a ricer lol.

I'm thinking about trying to do the door handle covers just like mazdaspeed. If it comes out decent I'll be sure to post pics.

Thanks!

 

I think the vinyl looks great if there is little cf on your car like the others have said.
I have a couple cf things and I felt the need to go with the real one because it would look silly among all the rest of the clear coated cf.
Here is a pic of the more expensive option for comparison.


good job with the DiNoc btw.

 

looking good. also good to see someone had the same idea.
did you remove the plain black wrap from the pillar before applying the cf or did you just wrap over it?

I am going to try spraying a test piece of the dinoc with a few layers of clear coat to see how it comes out for a more realistic CF look , if it looks good i'll do the same to the vinyl on the car

 

I didn't even realize you could remove the black from the pillar. I just wrapped it over. I rubbed each area I was wrapping with rubbing alcohol before applying the wrap. Then I used an edge to keep air bubbles from forming.

 

Anyone have experience to these? How's the weave and quality?

http://www.ebay.com/itm/3D-GLOSS-REA...#ht_5612wt_941

 

plan on doing the same thing soon, looking forward to it

 

BTW... Does anyone know how what the OP used compares to the 3M Dinoc CF vinyl?

I might look into clear coating as well.

 

Wow I wish I had seen that vid before. Be sure to post pics.

 

the black on the pillar is actually a wrap.
i wrapped over mine as well just in case i dont like the carbon wrap anymore.

as for the real

i might order a set just to see how they are. they seem pretty cheap in price but if i do get them i'll let you know unless someone else has them and wants to share

 

Looks good and i want a pair for my ride...

 

1 day?, thats like15 mins plus wash and vacuum...

 

got mine done today, ill try to remember to post pics

 

I have some extra dinoc laying around and my stock pillar wrap has some battle scars... im digging the look of the dinoc with clear coat... I wonder what more coats would look like. maybe I need to do some experimenting.

 

got pics?