Notices

Brake calipers/pads painted silver!

Old Jun 14, 2004 | 06:45 PM
  #1  
RotorManiac's Avatar
Thread Starter
Absolute Rotary Madness
 
Joined: Mar 2004
Posts: 1,291
Likes: 0
From: Thessaloniki, Greece
Cool Brake calipers&pads painted silver w/ MS logo!

Well, I always wanted to do that, the color of the calipers is just awful! Maybe cortc has beat me to it, but we talked about it a while back and we had the same taste of color!

I did it in a different way, took me only half an hour each (a friend helped me:p) and the result is a little bit different. I painted the upper part of the brake pad in the same color (I wanted it to look as a big massive silver caliper:D!) but, to tell the truth, I'm not finished yet...

I still have to produce some stencils on there! I'm not sure which is the best way though, I'm trying to figure it out.
*Cortc help me please... how did you do it? I could use some advice from an expert*
I'm thinking of two possibilities: either a "mazdaspeed" or an "RX-8" logo. Which one do you guys think is gonna better?

Here is a pic of the front caliper
Attached Thumbnails Brake calipers/pads painted silver!-front.jpg  

Last edited by RotorManiac; Oct 14, 2004 at 11:08 AM.
Reply
Old Jun 14, 2004 | 06:48 PM
  #2  
RotorManiac's Avatar
Thread Starter
Absolute Rotary Madness
 
Joined: Mar 2004
Posts: 1,291
Likes: 0
From: Thessaloniki, Greece
...and that is the rear

Notice I painted the center part of the brake disc too. There's a lot of silver there...
Attached Thumbnails Brake calipers/pads painted silver!-rear-caliper.jpg  
Reply
Old Jun 15, 2004 | 12:39 PM
  #3  
SilverTrigger's Avatar
Registered User
 
Joined: Dec 2003
Posts: 81
Likes: 0
From: Arkansas
Looks great, Rotor. I think a black RX-8 logo would look really good on the silver. Keep us updated.
Reply
Old Jun 15, 2004 | 02:58 PM
  #4  
RotorManiac's Avatar
Thread Starter
Absolute Rotary Madness
 
Joined: Mar 2004
Posts: 1,291
Likes: 0
From: Thessaloniki, Greece
Thank you SilverTrigger!
Actually I was leaning more towards the mazdaspeed logo... !
Oh crap, that's a hard desicion to make!
Reply
Old Jun 15, 2004 | 03:31 PM
  #5  
XeRo's Avatar
Normality is Obscene
 
Joined: Aug 2003
Posts: 1,053
Likes: 0
From: AL/GA...you pick
you know...once you replace your pads, the shim most likely will not go back on...just a thought...
Reply
Old Jun 15, 2004 | 05:35 PM
  #6  
Kel Rx8's Avatar
if your not 1st your last
 
Joined: Jan 2004
Posts: 4,889
Likes: 1
From: Jersey & Peru
very nice
i went with the mazdaspeed logo from
polakgraphics.com
Reply
Old Jun 15, 2004 | 07:53 PM
  #7  
cortc's Avatar
Registered User
 
Joined: Mar 2004
Posts: 1,401
Likes: 0
Looks good my friend, as far as logos go; if you are going to put a few Mazdaspeed parts on the car then go with it, otherwise I like the RX8 logo... Later tonight I will post more info on how I created the stencils and the painting process...
Reply
Old Jun 15, 2004 | 09:13 PM
  #8  
RotorManiac's Avatar
Thread Starter
Absolute Rotary Madness
 
Joined: Mar 2004
Posts: 1,291
Likes: 0
From: Thessaloniki, Greece
Thank you cortc once again!
You are quite right on this part: I didn't know a lot about mazdaspeed products but your threads got me convinced:D especially for flywheel,rear spoiler and strut bars! I'm seriously thinking of buying some of these stuff, if not most of them! So the ms logo must be better.
I just hope that the warranty stays after they're installed!
By the way, I wanted to ask you, do you have the four point or the two point SB?

Last edited by RotorManiac; Jun 15, 2004 at 09:23 PM.
Reply
Old Jun 15, 2004 | 10:16 PM
  #9  
SMigneco's Avatar
Registered User
 
Joined: Mar 2004
Posts: 188
Likes: 0
From: South Florida
Good job on the calipers. I have been wanting to do this for some time but just haven't gotten around to it yet.

MS suspension is the best mod I have done so far. It is the way the car should have come from the factory. It does not drop the car too much and the ride is just right. You feel so much more in touch with the road and if you think the car handles well now then you are in for a nice surprise! Handling is now AMAZING.

Reply
Old Jun 16, 2004 | 06:48 AM
  #10  
RotorManiac's Avatar
Thread Starter
Absolute Rotary Madness
 
Joined: Mar 2004
Posts: 1,291
Likes: 0
From: Thessaloniki, Greece
Thanks for sharing your impressions SMigneco! I've read about the suspension, but I wasn't sure if what people said was true. I'll put that in my future list then...

And do the calipers, it's really worth the time! The car is now awesome, I'll post a pic from further away to let you see...
Reply
Old Jun 16, 2004 | 09:04 AM
  #11  
Krayzie8's Avatar
Registered User
 
Joined: Apr 2004
Posts: 200
Likes: 0
From: Washington
i read an article about the mazda speed rx-8 from road and track, and they say that mazda went overboard improving the rx-8s handling....hehehe
Reply
Old Jun 16, 2004 | 07:31 PM
  #12  
orbist's Avatar
beyond the ultraworld
 
Joined: Oct 2003
Posts: 479
Likes: 0
From: Southampton, UK
Ended up with the same as you, my disc hubs were rusting badly and asked the dealer to sort it out, so they sprayed them, and the calipers and pads too !!!
Attached Thumbnails Brake calipers/pads painted silver!-painted_hubs_calipers.jpg  
Reply
Old Jun 16, 2004 | 07:32 PM
  #13  
orbist's Avatar
beyond the ultraworld
 
Joined: Oct 2003
Posts: 479
Likes: 0
From: Southampton, UK
one more...
Attached Thumbnails Brake calipers/pads painted silver!-painted_hubs_calipers2.jpg  
Reply
Old Jun 17, 2004 | 03:18 PM
  #14  
RotorManiac's Avatar
Thread Starter
Absolute Rotary Madness
 
Joined: Mar 2004
Posts: 1,291
Likes: 0
From: Thessaloniki, Greece
That's really nice! Great rims too!
Yeah, they do look identical! Some paint musta gotten between the pad and the disc, right? Happened to me too, got a little upset (thought I ruined the disc), but I nailed the brake pedal a few times and it came back to normal...
Will you try to put a logo on the caliper? These days I'm really busy and don't have time to do mine...
Reply
Old Jun 17, 2004 | 10:15 PM
  #15  
cortc's Avatar
Registered User
 
Joined: Mar 2004
Posts: 1,401
Likes: 0
All of the MS parts should not void your warranty, so you should be ok... I have the US spec two pt, I may be getting the four point this week; will keep you posted... Go for the Mazdaspeed logo, it really looks good...
Reply
Old Jun 19, 2004 | 07:41 PM
  #16  
RotorManiac's Avatar
Thread Starter
Absolute Rotary Madness
 
Joined: Mar 2004
Posts: 1,291
Likes: 0
From: Thessaloniki, Greece
did anyone post any info about how to create the stencils? sorry I don't have time to do a search...

*EDIT* well, I used my imagination, found same free time and finally came up with a decent result. I'll soon post some pics

Last edited by RotorManiac; Oct 14, 2004 at 11:21 AM.
Reply
Old Oct 14, 2004 | 11:46 AM
  #17  
RotorManiac's Avatar
Thread Starter
Absolute Rotary Madness
 
Joined: Mar 2004
Posts: 1,291
Likes: 0
From: Thessaloniki, Greece
Ok, here they are. some close pics and some from a distance.... it was my first time trying something like that, and I think the result is good

So what do you guys think?
Attached Thumbnails Brake calipers/pads painted silver!-dsc00473.jpg   Brake calipers/pads painted silver!-dsc00491.jpg   Brake calipers/pads painted silver!-dsc00490.jpg  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nferguson88
RX-8 Parts For Sale/Wanted
1
Oct 6, 2015 12:45 PM
jasonrxeight
RX-8 Parts For Sale/Wanted
8
Oct 3, 2015 09:51 AM
RAVSPEC
Vendor Classifieds
0
Oct 1, 2015 01:59 PM
D13
Series I Trouble Shooting
0
Oct 1, 2015 07:55 AM
GK1707
RX-8 Parts For Sale/Wanted
0
Sep 27, 2015 07:33 PM


Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 12:08 AM.