lokaldisruption

it seems like a cheaper escape from the yellow while they are not in use...just blacking them out...instead of spending the 80$ to get clear ones...anyone already do it this way out there?

Fortunate Few

iTrader: (2)

yeah theres a bunch of people, some spay them. Mine have the vinyl overlays. best decision i ever made. only thing is from certain angles they look kinda brown. with the spray you can get it just the right shade.

G3tR3DDY2GR3DDY

iTrader: (8)

i have clear ones tinted spray:

HERO

iTrader: (3)

Did you guys spray them yourselves? If so, what did you use?

pup

i used the vht niteshades tint spray.........got it off of ebay .......i scuffed them up......cleaned them......sprayed 3 light coats of the tint.......2 of the clear and polished them with my buffer.......pay attention to the sides of teh corners thats where it can look brown the most .....good luck

BBQdDude

I did the same as pup. Mine are hanging up drying waiting to be clear coated. I did 5 coats but I did VERY LIGHT coats. I was worried about drips/runs.

Take care,

Brian

pup

just take your time and dont get in a hurry.....if you rush it turns out like crap.....i took out my tails and corners on friday and finished them ssturday nite.....plenty of drying time......dont forget to polish them.....they will look better.....good luck bro

Silver_Mazda09

If you have an hobby store near by, you can get an small can of dark shade. That is what I used to tint (smoke) my side markers....Good luck!