Tuning session
05-05-2016, 08:28 AM
#1
Tuning session
Check it out Midwest Chicago land area on the Chicago garage forum
Tuning and BBQ May 7, 2016 (Deans Performance) - The Chicago Garage
My tuner (Steve Kan) is coming up to tune some rotary vehicles. We do have tuning slots open still if anyone is interested (see list of ECUs below) and also wanted to open it up for some BBQ food and 3 pull dyno runs. If interested, PM me or drop a note in this thread. The tuning and bbq will be at Deans Performance in St Charles. Even if you just want to stop by to eat let me know so we can plan food appropriately. Dates are tentatively set for May 7th for bbq but May 6-8th for tuning services.
Pricing:
3 Rips on the dyno $80
Tuning prices vary depending on licensing and platform
Dyno fee is a flat $100 for the duration of tuning time
ECUs Tuned:
Accel Gen 7
Adaptronics
AEM EMS
AEM (FIC) Fuel/Ignition Controller
A'PEXi Power FC/FC Edit (all cars/model)
Autronic SMC, SM2 and SM4
Cobb Accessport for Rx8, GTR, Evo x, bmw, subaru, ford
Diablosport
Dynojet Power Commander / all models
DSM/ECM Link
EcuFlash for Subaru and Mitsubishi vehicles
Ecutek FRS
EFI Live
Electromotive Tec 3 and Tec 3R
F.A.S.T. and F.A.S.T. XFI
Fueltek
GReddy Emanage and Emanage Ultimate
Haltech E6X(K), F10X, E6GMX, E8, E11v2 and Platinum 1000/2000, elite 1500/2500
Haltech F10 Fuel Controller
Haltech Interceptor and Miniceptor
Hondata S300, Flash Pro and K-Pro
HP Tuners
Hydra EMS 2.5/2.6/2.7
Link G4
MAF Translator Pro, MAF Translator GenII and MAF Translator
MAP ECU I/II
Megasquirt
Mircotech LT8, LT10, LT12
MoTec M4, M48, M400, M600, M800 and M880
Rtek
SAFC or VAFC
SCT Flash
Turbo XS UTEC
UpRev
Wolf EMS
Tuning and BBQ May 7, 2016 (Deans Performance) - The Chicago Garage
My tuner (Steve Kan) is coming up to tune some rotary vehicles. We do have tuning slots open still if anyone is interested (see list of ECUs below) and also wanted to open it up for some BBQ food and 3 pull dyno runs. If interested, PM me or drop a note in this thread. The tuning and bbq will be at Deans Performance in St Charles. Even if you just want to stop by to eat let me know so we can plan food appropriately. Dates are tentatively set for May 7th for bbq but May 6-8th for tuning services.
Pricing:
3 Rips on the dyno $80
Tuning prices vary depending on licensing and platform
Dyno fee is a flat $100 for the duration of tuning time
ECUs Tuned:
Accel Gen 7
Adaptronics
AEM EMS
AEM (FIC) Fuel/Ignition Controller
A'PEXi Power FC/FC Edit (all cars/model)
Autronic SMC, SM2 and SM4
Cobb Accessport for Rx8, GTR, Evo x, bmw, subaru, ford
Diablosport
Dynojet Power Commander / all models
DSM/ECM Link
EcuFlash for Subaru and Mitsubishi vehicles
Ecutek FRS
EFI Live
Electromotive Tec 3 and Tec 3R
F.A.S.T. and F.A.S.T. XFI
Fueltek
GReddy Emanage and Emanage Ultimate
Haltech E6X(K), F10X, E6GMX, E8, E11v2 and Platinum 1000/2000, elite 1500/2500
Haltech F10 Fuel Controller
Haltech Interceptor and Miniceptor
Hondata S300, Flash Pro and K-Pro
HP Tuners
Hydra EMS 2.5/2.6/2.7
Link G4
MAF Translator Pro, MAF Translator GenII and MAF Translator
MAP ECU I/II
Megasquirt
Mircotech LT8, LT10, LT12
MoTec M4, M48, M400, M600, M800 and M880
Rtek
SAFC or VAFC
SCT Flash
Turbo XS UTEC
UpRev
Wolf EMS
05-10-2016, 03:10 PM
#2
Registered
I saw this was postponed. Any new date / time? I am in the middle of trying to get my car to pass emissions 
Technically not fully street legal but would love to get it on a dyno to see if I am missing something somewhere.
Technically not fully street legal but would love to get it on a dyno to see if I am missing something somewhere.
