RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Engine Tuning Forum (https://www.rx8club.com/series-i-engine-tuning-forum-63/)
-   -   odd cobb/ecu question (https://www.rx8club.com/series-i-engine-tuning-forum-63/odd-cobb-ecu-question-269107/)

200.mph 01-31-2019 10:47 PM

odd cobb/ecu question
 
ill try to make this quick. years ago my 8 was totaled and my cobb was married to it but at the time my cobb wasnt working because some of the connector pins were jacked up. got the cobb fixed (thanks archwisp) but its still married. i gave swoope my ecu a while ago and just spoke to him. my question is if he plugged my computer into his car would it power on and would he be able to unmarry my accessport from it if i sent it to him? we are not sure if the ecu would work enough to do it if he connected it to his 8? would it mess anything up? my only other option is to send it to cobb for a reflash which is expensive

thanks

dannobre 02-01-2019 12:26 AM


Originally Posted by 200.mph (Post 4880160)
ill try to make this quick. years ago my 8 was totaled and my cobb was married to it but at the time my cobb wasnt working because some of the connector pins were jacked up. got the cobb fixed (thanks archwisp) but its still married. i gave swoope my ecu a while ago and just spoke to him. my question is if he plugged my computer into his car would it power on and would he be able to unmarry my accessport from it if i sent it to him? we are not sure if the ecu would work enough to do it if he connected it to his 8? would it mess anything up? my only other option is to send it to cobb for a reflash which is expensive

thanks

It might work. It depends on what the Cobb needs to do to authenticate the flash. If it is just checking the ID data it might work. The ECU won't work properly... but it should power on perfectly fine

whether or not it confuses the other CAN modules permanently is the question... I would guess no... but it would be a guess

swoope 02-02-2019 04:17 PM


Originally Posted by dannobre (Post 4880162)
It might work. It depends on what the Cobb needs to do to authenticate the flash. If it is just checking the ID data it might work. The ECU won't work properly... but it should power on perfectly fine

whether or not it confuses the other CAN modules permanently is the question... I would guess no... but it would be a guess

dan thanks for the help with the chat the other night.

as to the topic, could anything be damaged on my car if i swap the ecu's?

beers :beer:

04Green 02-05-2019 09:39 AM

Not sure on this one. Dannobre is one I would have asked. What year is your car?

If it were me, I would look for a wrecked 8, the right year. Then publish the findings.

Option 2 is look for a more modern tuner. People are starting to get back in the game.

Best I got

200.mph 02-05-2019 03:49 PM

thanks for the help guys, last thing i want to do is mess someones car up to save me a few hundred. i figured since cobbs arent made anymore i would try to get it unlocked

ShellDude 02-05-2019 09:45 PM

I don't think you'll mess up anything... stuff just won't work with the new ECU until it gets an AS BUILT flash. You may not even be able to get on the CAN bus because of the immobilizer freaking out.

m4f1050 09-21-2019 03:16 AM


Originally Posted by ShellDude (Post 4880480)
I don't think you'll mess up anything... stuff just won't work with the new ECU until it gets an AS BUILT flash. You may not even be able to get on the CAN bus because of the immobilizer freaking out.

I just unmarried my 2006 MT ECU from my AP connecting it on my 2006 AT RX8. Nothing messed up, but I didn't try to turn over motor, just put key to ON position. CAN bus did work and AP communicated with ECU fine.

NOTE: These were same year ECUs/RX8, I haven't tried different year ECUs/RX8 combination, but if you try please report finding.

Thanks!


All times are GMT -5. The time now is 09:20 PM.


© 2024 MH Sub I, LLC dba Internet Brands