DIY: Custom Sub Box Install- pics and plans
#1
Mmmmm... Rotary Donut
Thread Starter
Join Date: Nov 2003
Location: Lake in the Hills, IL (NW Chicago Burbs)
Posts: 2,376
Likes: 0
Received 4 Likes
on
2 Posts
Custom Sub Box Install- pics and plans
While I'm relatively happy with my Bose system, I feel it really lacks any semblance of bass. I had a Bazooka 10" in my Miata's trunk, which did exactly what I wanted- filled in the low's with solid, tight bass that was heard in the car, not out of it. I wanted the same for my RX8, but I wanted to take advantage of the larger trunk to create a small enclosure with a little more power.
This weekend I put together a custom subwoofer box with plans I made in Visio after measuring the space I wanted the box to occupy (basically the space between the seats and the back lip of the trunk). I wanted clean, tight bass in a small package so I went for a sealed box design at the minimum recommended volume for my subs of choice (Alpine 10" Type E "budget" subs . It's been about 15 years since I last built a box, so I wanted to do this one right- I used 3/4" MDF, liquid nails, sound deadener spray, polyfill, speaker gaskets, OFHC 10Ga speaker wire and power wire, etc.
Anyway, if anyone is interested, I'll convert the plans from visio to GIF and post them... but for now, below are a few pics of the box, pre-construction and installed.
This weekend I put together a custom subwoofer box with plans I made in Visio after measuring the space I wanted the box to occupy (basically the space between the seats and the back lip of the trunk). I wanted clean, tight bass in a small package so I went for a sealed box design at the minimum recommended volume for my subs of choice (Alpine 10" Type E "budget" subs . It's been about 15 years since I last built a box, so I wanted to do this one right- I used 3/4" MDF, liquid nails, sound deadener spray, polyfill, speaker gaskets, OFHC 10Ga speaker wire and power wire, etc.
Anyway, if anyone is interested, I'll convert the plans from visio to GIF and post them... but for now, below are a few pics of the box, pre-construction and installed.
Last edited by G8rboy; 02-02-2004 at 02:28 PM.
The following users liked this post:
JimmyV (01-27-2019)
#11
Mmmmm... Rotary Donut
Thread Starter
Join Date: Nov 2003
Location: Lake in the Hills, IL (NW Chicago Burbs)
Posts: 2,376
Likes: 0
Received 4 Likes
on
2 Posts
The last two shots really show how much trunk space is left. I did have to remove my spare tire and mounting kit (I didn't really want it, but it was already installed on this car when I found it on the lot). I maximized space by matching the slope of the box's face to the slope of the back seats (65 degrees), and making the bottom just large enough to easily slip in and out if I need to remove the box for long trips, etc.
As for the sound- it's exactly what I was looking for- not ear shattering or sheet-metal rattling- just low, tight bass to supplement the Bose. I still have some tweaking to the cut-off and gain to make it agreeable to all types of music, but it's helluva improvement so far.
As I mentioned- I'll convert the detailed design docs to .gif if there's any interest.
-Sean
As for the sound- it's exactly what I was looking for- not ear shattering or sheet-metal rattling- just low, tight bass to supplement the Bose. I still have some tweaking to the cut-off and gain to make it agreeable to all types of music, but it's helluva improvement so far.
As I mentioned- I'll convert the detailed design docs to .gif if there's any interest.
-Sean
#13
Registered User
Join Date: Dec 2003
Location: New Port Richey, Florida
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
Absolutely amazing man! And you still have room to throw your crap in the back! I wish you were in FL to make me 1. I would pay high dollar for that.
#15
Mmmmm... Rotary Donut
Thread Starter
Join Date: Nov 2003
Location: Lake in the Hills, IL (NW Chicago Burbs)
Posts: 2,376
Likes: 0
Received 4 Likes
on
2 Posts
Originally posted by Jeff_pap31s
Absolutely amazing man! And you still have room to throw your crap in the back! I wish you were in FL to make me 1. I would pay high dollar for that.
Absolutely amazing man! And you still have room to throw your crap in the back! I wish you were in FL to make me 1. I would pay high dollar for that.