DIY: Code your own key / remote
11-03-2004, 01:38 PM
#1
DIY: Code your own key / remote
This information can be used to add a new key and / or remote (including 2005 retractable key / remote to 2004 cars) to your vehicle.
Two things to keep in mind-
Key programming-
You MUST have at least two existing keys in order to add another new key. This will not work if you only have one good key, & want to add a new key. If you only have one good key(or have lost all keys) you will need to go to the dealer.
Remote programming-
IMPORTANT- When the instructions indicate you must press the door switch 3 times, they mean the door ajar switch located on the rear door, just below the front door catch.
Enjoy!
GIF Images work, just click on DIY: Code you own key links below
Two things to keep in mind-
Key programming-
You MUST have at least two existing keys in order to add another new key. This will not work if you only have one good key, & want to add a new key. If you only have one good key(or have lost all keys) you will need to go to the dealer.
Remote programming-
IMPORTANT- When the instructions indicate you must press the door switch 3 times, they mean the door ajar switch located on the rear door, just below the front door catch.
Enjoy!
GIF Images work, just click on DIY: Code you own key links below
Last edited by Mazda Monkey; 11-03-2004 at 04:15 PM.
The following 2 users liked this post by Mazda Monkey:
HAPStarRX8 (06-22-2018),
Little White Rotary (08-01-2023)
11-03-2004, 02:57 PM
#2
Registered User
Join Date: Jan 2004
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
great post, but I was just able to read the key programing. The last attachment only shows procedure 1 and 2 and no where says to press the door switch 3 times (procedure 5?). Could you point out in your attachment how to program the remote?
By the way, I am ok with my old keys but at least I got the option in upgrading later on
11-10-2004, 06:02 PM
#6
New Member
eh..... https://www.rx8club.com/series-i-do-yourself-forum-73/diy-code-your-new-key-yourself-15244/
1/2 of a repost ?
:D
1/2 of a repost ?
:D
12-06-2004, 06:38 PM
#7
Registered
Join Date: Jul 2003
Location: Northern California
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Mazda Monkey (and takahashi). Got the '05 Key/Remote this weekend. Programming went smoothly. I have an early build '04 RX8 (pre-order) in case anyone was wondering. So if it worked on my car I think it should work on any '04. Hardest part was probably finding a place to do the key cut. Ended up getting it cut at an Ace Hardware store on one of those key tracing (touch less) machines.
12-11-2004, 01:24 PM
#8
Mercury273
Join Date: Dec 2004
Location: Cleveland, OH
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
So the idea that I am getting, is that, if I only have one remaining valid key, and my valet key I cannot program my new retractable key without the Dealer's assistance with the WDS? Or is there a way other than the WDS to achieve this. Thanks
12-11-2004, 05:11 PM
#9
New Member
K1nG,
They need for VIN number just for data logging. Mazda obviously does not want to give a RX-8 chipped key to anyone. There is no "special" key for your car. Most RX-8 key should be generatic for all RX-8 models *(4 port or 6 port)
mercury273,
Valet key should have a chip in it since it can start a car. So theoretically you can use it as a 2nd coded key.
WDS DOES NOT code keys - it is simply bullshit and the identification tag is at your ignition of your car (not the WDS). If so WDS can start your car without your key and why do they want you to leave your set of keys behind for service then
.
Hope this helps.
They need for VIN number just for data logging. Mazda obviously does not want to give a RX-8 chipped key to anyone. There is no "special" key for your car. Most RX-8 key should be generatic for all RX-8 models *(4 port or 6 port)
mercury273,
Valet key should have a chip in it since it can start a car. So theoretically you can use it as a 2nd coded key.
WDS DOES NOT code keys - it is simply bullshit and the identification tag is at your ignition of your car (not the WDS). If so WDS can start your car without your key and why do they want you to leave your set of keys behind for service then
. Hope this helps.
12-16-2004, 10:50 PM
#14
Originally Posted by takahashi
K1nG,
They need for VIN number just for data logging. Mazda obviously does not want to give a RX-8 chipped key to anyone. There is no "special" key for your car. Most RX-8 key should be generatic for all RX-8 models *(4 port or 6 port)
mercury273,
Valet key should have a chip in it since it can start a car. So theoretically you can use it as a 2nd coded key.
WDS DOES NOT code keys - it is simply bullshit and the identification tag is at your ignition of your car (not the WDS). If so WDS can start your car without your key and why do they want you to leave your set of keys behind for service then.
Hope this helps.
They need for VIN number just for data logging. Mazda obviously does not want to give a RX-8 chipped key to anyone. There is no "special" key for your car. Most RX-8 key should be generatic for all RX-8 models *(4 port or 6 port)
mercury273,
Valet key should have a chip in it since it can start a car. So theoretically you can use it as a 2nd coded key.
WDS DOES NOT code keys - it is simply bullshit and the identification tag is at your ignition of your car (not the WDS). If so WDS can start your car without your key and why do they want you to leave your set of keys behind for service then
. Hope this helps.
If you only have one remaining key that starts the engine, WDS is the only way to program additional keys, can't do it yourself with only one good one.
I can't get my key work right
