When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The aim is to gather a useful archive for 3d printing parts.
I have seen many times original files developed and made by a user and later others remixed and published the part not only with no credit but even selling it.
Disclaimer, all files are linked to the originally published site which followed its policy for copyright protection.
DO NOT upload direct files here or link a 3rd party server unless you are the original designer / lawful licence holder.
@motodenta any designs for ram air scoop? I was thinking about opening top of the front bumper - cut the square out and make it removable (like a mini hood) when on track to have straight path into airbox. What I am missing is custom made ram scoop that could fit in there to collect and direct the air straight into airbox?
Our local library has 3d printer I just need design for the scoop that would fit in that space and connect with airbox mouth.
something like this:
Last edited by Nadrealista; 04-24-2024 at 08:53 AM.
@motodenta any designs for ram air scoop? I was thinking about opening top of the front bumper - cut the square out and make it removable (like a mini hood) when on track to have straight path into airbox. What I am missing is custom made ram scoop that could fit in there to collect and direct the air straight into airbox?
Our local library has 3d printer I just need design for the scoop that would fit in that space and connect with airbox mouth.
@Nadrealista
Yes potentially I (or someone else) can do it after half a bottle of whisky and and hours.
Printing is the hard part, as it is better to make from flexible/ish materials like ABS/ ASA or even better with TPU with the right shore number, not just that it would take time if not use
fast printer. for example, the printing time on my Creality cr10s printer is 26min for a job while the same setting with the same setting would print on my Bambu lab x1carbon in 6min.
Considering you can source similar par out the shelf. Also don't forget the bottle neck of intake if somewhere els IMO.
I was trying to find a way to keep my big 6D Maglite/club/Striker secure without drilling new holes or glue.
If any one can find one, or figure out a way to hook a hanger into the plastic seam, that would be cool.
Could also maybe make them for pistols or other device holders.
04-21-2024, 06:13 AM
3D print parts
