ZEX Nitrous Kit Trouble
08-11-2007, 12:06 PM
#1
Registered User
Thread Starter
Join Date: Jul 2007
Location: new jersey U.S.A
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
ZEX Nitrous Kit Trouble
i installed my zex kit and when programing the (N.M.U)nitrous management unit i get a rapid flashing green but no clicking so unit is not useing the nitrous
programing step 1 click the button N.M.U get red light (it start off *** green)
step 2 floor gas peddle till you get a green blank red flashing light
step 3 turn switch off then back on floor gas
this is where u should hear the clicking sound letting you know it opening im am not getting this all im getting is a rapid flashing green
please help me since the zex tech couldnt thank you
________
Yamaha YZ426F
programing step 1 click the button N.M.U get red light (it start off *** green)
step 2 floor gas peddle till you get a green blank red flashing light
step 3 turn switch off then back on floor gas
this is where u should hear the clicking sound letting you know it opening im am not getting this all im getting is a rapid flashing green
please help me since the zex tech couldnt thank you ________
Yamaha YZ426F
Last edited by nelsonrx8; 01-18-2011 at 05:25 PM.
08-11-2007, 12:18 PM
#2
Administrator
iTrader: (7)
***paging Dr. Charles Hill***
08-11-2007, 12:28 PM
#4
Administrator
iTrader: (7)
Jedi Mind Powers...
08-11-2007, 12:30 PM
#5
Registered User
Thread Starter
Join Date: Jul 2007
Location: new jersey U.S.A
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
Last edited by nelsonrx8; 01-18-2011 at 05:26 PM.
08-11-2007, 12:32 PM
#6
Administrator
iTrader: (7)
08-11-2007, 03:20 PM
#8
Registered User
Thread Starter
Join Date: Jul 2007
Location: new jersey U.S.A
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
Last edited by nelsonrx8; 01-18-2011 at 05:26 PM.
08-11-2007, 09:21 PM
#9
RotoRocks Powered
To make sure, I'd recheck the wiring connection from TB specifically.
It sounds like the signal is not registering.
Go to "Nitrous" tread by Charles R. Hill and look for pictures where we were posting our installs. They should be dated sometimes like may 2006 or later. There will be some picks of the TB splice. Make sure you have the correct wire.
It sounds like the signal is not registering.
Go to "Nitrous" tread by Charles R. Hill and look for pictures where we were posting our installs. They should be dated sometimes like may 2006 or later. There will be some picks of the TB splice. Make sure you have the correct wire.
08-12-2007, 09:17 AM
#10
Registered User
Thread Starter
Join Date: Jul 2007
Location: new jersey U.S.A
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
this is really getting on my nerves i recheck the wiring connection from TB everything looks good im going to rip it all out in a sec i cant see why its not working
________
CB650SC
________
CB650SC
Last edited by nelsonrx8; 01-18-2011 at 05:26 PM.
08-12-2007, 05:29 PM
#11
Registered User
Thread Starter
Join Date: Jul 2007
Location: new jersey U.S.A
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
Last edited by nelsonrx8; 01-18-2011 at 05:26 PM.
08-12-2007, 05:38 PM
#12
Misfit Moderator TnC
nelson what part of jersey you in?....if you wanna come out on tuesday night i can show you a mr hill installation on my car....we usually get together in east rutherford.......a bunch of 7's and 8's
08-12-2007, 05:44 PM
#13
Misfit Moderator TnC
https://www.rx8club.com/ne-rx-8-forum-29/ne-nj-local-meets-tuesday-nights-121615/
thats the link to the meets nelson
ray i will make sure to ask her for ya
thats the link to the meets nelson
ray i will make sure to ask her for ya
08-12-2007, 05:44 PM
#14
Registered User
Thread Starter
Join Date: Jul 2007
Location: new jersey U.S.A
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
Last edited by nelsonrx8; 01-21-2011 at 08:01 PM.
08-12-2007, 05:55 PM
#16
Registered User
Thread Starter
Join Date: Jul 2007
Location: new jersey U.S.A
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
Last edited by nelsonrx8; 01-21-2011 at 08:01 PM.
08-14-2007, 06:37 AM
#18
Registered User
Thread Starter
Join Date: Jul 2007
Location: new jersey U.S.A
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
Last edited by nelsonrx8; 01-21-2011 at 08:02 PM.
08-14-2007, 12:41 PM
#21
Registered User
Thread Starter
Join Date: Jul 2007
Location: new jersey U.S.A
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
Last edited by nelsonrx8; 01-21-2011 at 08:02 PM.
08-14-2007, 12:43 PM
#22
Administrator
iTrader: (7)
google video. Many users are on while at work and web sensors hate youtube.
08-14-2007, 01:05 PM
#23
Registered User
Thread Starter
Join Date: Jul 2007
Location: new jersey U.S.A
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
Google
Last edited by nelsonrx8; 01-21-2011 at 08:03 PM.
08-14-2007, 01:32 PM
#24
Registered User
Thread Starter
Join Date: Jul 2007
Location: new jersey U.S.A
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
http://video.google.com/videoplay?do...51185569&hl=en
here it is and dont make fun lol
th wire from the T/B was moved thats why it looks like that
________
digital vaporizers
here it is and dont make fun lol
th wire from the T/B was moved thats why it looks like that
________
digital vaporizers
Last edited by nelsonrx8; 01-21-2011 at 08:03 PM.
08-14-2007, 01:36 PM
#25
Registered User
Thread Starter
Join Date: Jul 2007
Location: new jersey U.S.A
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
Last edited by nelsonrx8; 01-21-2011 at 08:03 PM.