Team RX8s Catalytic info
#27
Registered
iTrader: (4)
#28
Original Turbo 'd Auto !!
it looks like Billy Boat is a distributor for their products. www.bbexhaust.com makes no mention of this.
That dosent surprise me. BB lacks on updating thier page with up to date info.
Plus he's an ***.
#32
Bigus Rotus
iTrader: (3)
I have only logged up to 1702F on the dyno with my current cat. Anybody log higher? Does the distance, when locating this cat from the exhaust manifold/header exit flange to the cat's entrance flange (welded to the cat with minimal distance), effect the ability of the CAT to properly lite off? Or, does the location still need to be as close as possible?
#35
weeeeeeeeee
iTrader: (12)
I did find this from swoope at some point and it's consistent with what I see with my AFRs in the low 12s
https://www.rx8club.com/showpost.php...30&postcount=9
https://www.rx8club.com/showpost.php...30&postcount=9
#41
No respecter of malarkey
iTrader: (25)
According to their website, http://www.hjs-motorsport.com/bezugsquellen.php, it looks like Billy Boat is a distributor for their products. www.bbexhaust.com makes no mention of this.
#45
Administrator
iTrader: (7)
I'm curious to see how well that cat holds up with your turbo Psycho.
#50
I had the cat put on about two weeks ago.
Performance wise, i don't see a noticeable changed compared to the RP surpercat that i had. It could be due to the HKS legamax catback being the bottle neck.
Exhaust noise is about the same and there's no more bad smell.
The cat is hanging a little low to the ground. I would suggest getting the 2/1012/10PE cat. it is smaller in body diameter.
Performance wise, i don't see a noticeable changed compared to the RP surpercat that i had. It could be due to the HKS legamax catback being the bottle neck.
Exhaust noise is about the same and there's no more bad smell.
The cat is hanging a little low to the ground. I would suggest getting the 2/1012/10PE cat. it is smaller in body diameter.