man that custom exhaust sounds good i think i might be able to do that plus 7hp cant beat that
|
Originally Posted by Hi Flying 8
If the only way you judge the quality of workmanship is by weight, then you would be right. However, this exhaust was engineered to give max flow with the smoothest possible transitions and to avoid the need to be replaced next year. This is the way I want it in order to avoid having to worry about future problems and expenses. I wouldn't disparage someone's work because of three pounds, without knowing a little more info before making that kind of judgement.
you're getting in deeper and deeper, mine has less transitions and it will be around longer than most RX-8s. It's supported using the OE rubber isolators at both the differental hanger point and at one of the OE muffler hanger points. It's not going to break or fall off if that's what you're trying to imply. I'm an engineer and work for a stainless steel manufactuer/fabricator; light gauge tubing is our business. I can tell where all the extra weight is just by looking at it and I'm only disparaging your excessive hype, nothing more. |
i want one that aims down like the RBs, i also want to have it as a daily driver/exhaust
|
how much are you willing to spend?
|
300-400 max
|
can't make a super light one for that, what's your max target weight?
|
Originally Posted by TeamRX8
can't make a super light one for that, what's your max target weight?
I also want the exhaust tip to face down so u cant see it from the back and have the exsisting exhaust holes in the bumper as a rear difusser to let the air out of teh back. |
Originally Posted by TeamRX8
how much are you willing to spend?
We are waiting in Greece around March for a ti single but the price is yet to be known. |
I'd guess somewhere in the 750 Eur range if it's mass produced
|
In that range I was thinking also. Thnx.
It will be hand made, copied from a jdm model. I will lay more info when I have more myself. And ofcourse I have to trade off my trust ti... |
Originally Posted by rx8guy17
If anyone can answer this if they make a single exhaust for the 8, like an N/A exhaust, do they not because it not enough back pressure? or because it wont give enough power, im thinking of trying to get a custom one made with like an Apexi N1 muffler let me know what u think and if they make any out there?
Comes out the center of the car, through the little rotary symbole The tip is in the shape of a rotor has two resonators and a muffler I made 270 whp @ 8 psi on the GReddy kit with it. |
let's see some pics when the surrounding bumper area melts :)
|
https://cimg6.ibsrv.net/gimg/www.rx8...abc16822f9.jpg
https://cimg9.ibsrv.net/gimg/www.rx8...dcf2c9e85d.jpgparked next to me at Morongo casino |
All times are GMT -5. The time now is 06:49 AM. |
© 2024 MH Sub I, LLC dba Internet Brands