RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Aftermarket Performance Modifications (https://www.rx8club.com/series-i-aftermarket-performance-modifications-23/)
-   -   RX-8 Gear Ratio!!! (https://www.rx8club.com/series-i-aftermarket-performance-modifications-23/rx-8-gear-ratio-21206/)

10000RPM 02-19-2004 10:41 AM

RX-8 Gear Ratio!!!
 
I preformed a search but had know luck ,maybe some body can help me find out what the final drive ratio is on the RX-8. I know from my other experiences with Mustangs and F-body car's you can get alot greater buttom end response if you drop in a set of 4:10 gears. I beleive this would make up for the low torque rating and also making lauching the 8 alot easier at the track. I have seen reports of some mid 14 sec. runs on this forum, I beleive this was with the stock gears.I see no reason why a set of lower gears couldn't push the RX-8 into the low 14's, throw on exhaust, intake & a stage one then who knows the 13's can't be that far away. :cool:

DYT 02-19-2004 12:23 PM

I believe it's 4.444:1

epitrochoid 02-19-2004 01:16 PM

you can get 13's with stage 1 alone

tommy12g 02-19-2004 01:40 PM

I could have sworn that the car had something ridiculous like 5.11:1 ??

zoom44 02-19-2004 01:51 PM


Diff - 4.444
1st - 3.760 * 4.444 = 16.7094
2nd - 2.269 * 4.444 = 10.0834
3rd - 1.539 * 4.444 = 6.83932
4th - 1.187 * 4.444 = 5.27503
5th - 1.000 * 4.444 = 4.44400
6th - 0.843 * 4.444 = 3.74629


edit: sorry that is the japanese third gear. i cant find the US now but it is different.

neit_jnf 02-19-2004 02:06 PM

4.444:1

Drop a Canz Stage 2 with header, catless midpipe and catback exhaust and it'll probaly get mid (or low) 13's

Put 16 inch wheels in the rear with slicks and you'll probably explode the tranny ;)

10000RPM 02-20-2004 05:00 PM

:eek: 4.444:1:eek: My god thats a huge gear!!! Does any one make a larger gear set for an RX-8 maybe (4.755:1 +) this would greatly improve take off and 1/4 mile times. My goal is to get low 13's with out killing the tranny. so far my best is 14.6 @ 98.00mph only mods are K&N intake with RX-8 Store exhaust, thats not to bad I guss for a non turbo 1.3L. Any way thanks for the help.

rx-7~rx-8 02-20-2004 05:40 PM

stock RX-8 should hit 14.5-15.0... with exhaust n intake iw should drop to 14.0-14.4

DemonRX-8 02-20-2004 05:46 PM

US 3rd gear is 1.65:1.

neit_jnf 02-20-2004 06:00 PM

I know this has been discussed before but I forgot, why is the 3rd gear different for US and Japan?

Xavier296 02-24-2004 10:24 AM

A pretty good start to getting your 13s would be a set of lightweight pulleys and a unorthodox racing lightened flywheel. Free up some HP and allow your already fast revving motor to rev even faster. Have done this mod to a few of my cars. makes a huge difference on some, less on others.

epitrochoid 02-25-2004 07:11 PM

that sucks for japan, i love doing 3rd gear pulls!


All times are GMT -5. The time now is 06:14 PM.


© 2024 MH Sub I, LLC dba Internet Brands