venom914

iTrader: (4)

i know that in the directions and everything it says how you have to take the front bumper off and everything...but is it possible to install the intake without taking off the bumper and just do everything from under the hood???
let me know, thanks.

Grungepup

iTrader: (2)

nope..... the S pipe that pokes thru and curves down bolts on directly behind the bumper, not to mention the bolts holding the VFAD are located behind the bumper as well.

quazmosis

iTrader: (2)

Yep gotta take that bumper off.

rodjonathan

iTrader: (6)

yup its a must ... its really not hard at all i had never done it until i did the aem install and it was actually pretty easy

q-tip

takes me about 8 minutes to remove my bumper. Not a big deal at all.

myriadshalaks

iTrader: (1)

on the advice of ray hill and brice, i did it without taking off the bumper or the wheels because no jackstands. but i regretted it.

if you just undo everything on the top and loosen everything on the bottom, you can lean it down to slide the tube down there.

the working spaces will be tight.

venom914

iTrader: (4)

k thanks for the help im just gona take the bumber off