New Pettit Racing exhaust system
 

Hi everyone,

Just wanted to say that the new Pettit Racing RX8 exhaust system is out now.

http://www.millteksport.com/media/im...onal/74.lg.jpg

It is a full modular system developed with Milltek Exhausts in the UK.
They do a lot of great high end systems, and the Pettit system is a peach.

http://www.millteksport.com/media/im...onal/68.lg.jpg

Its a full 3 inch system, developed as a modular system from the OEM manifold back.

The cat back tips are 4" and are double slash cut to be the only ones I know that actually fit with the rear valance of the 8.


http://www.millteksport.com/media/im...onal/69.lg.jpg
The modular system eliminates the centre flange, which creates a restriction, and extra weight in other systems, and can link to either a resonated super performance HJS hi flow cat (rated to over 1050C) or a race pipe.

Again the modular nature of the system means you keep the resonator section up, and just drop the manifold flange and can swap between race pipe or hi flow cat.

Weight wise, it drops about 7kg over the OEM system

http://www.millteksport.com/media/im...onal/72.lg.jpg

The system is designed to be unobtrusive at lower revs, and come alive high up, eliminating horrible "cruise drone" that some systems suffer from.

I've had the full hi flow cat system on my car for a few thousand miles now and its great. Looks awesome and sounds good too.... I love tunnels now. :cuddle:

Contact Pettit US for the US prices etc, as I have no idea!

A nice pic of me on the track with it... you can see how well it flows with the rear valance...

http://photos.smugmug.com/photos/i-5...-5t8zrh8-L.jpg

A likle youtube:

http://www.youtube.com/watch?v=txFcXmEUR6w

and a factory vid:

http://www.youtube.com/watch?v=iADgK3gsQM0

Wow, looks great.

I love the tips. They look fantastic.

Sounds pretty damn good too. :bigok:

Have Milltek's help is never a bad thing.

Wow ... i LOVE it, someone find the price asap

the tips are very sexy...4in? slash cut 4in is what i have and it fits the shrouds perfectly
hope they are thick enough that they dont melt the exhaust shrouds like the old TurboXS...they look longer than the old TurboXS version though

Great looking and sounding car

I wonder how they will look on an s2

^^^ S2s have a different tip location, they are lower and moved towards the center more

It is still not on their site. You sure this exhaust is going to be available in the US?

There are units available in the US now. Probably not updated site yet.

As for the tips, yes they are 4 inch, they are rear cooled (watch the vid!) so no worries with melting shrouds etc.
You can touch them after a run..... but dont quote me (sue me) on that...

S2 version is scheduled for dev, and hopefully should be ready for year end.....

good to know man...sounds like a good product :yesnod:

I'm definitely interested in this one for my Series II.

Looks like i found my new exhaust as well :)

Is this the same company who makes the super charger ??

Looks good i like how the tip flows with the lines of the car from the side.

Any idea if the resonator on the non catted version has any internal packing? In other words is it like BHR's or is it like all the crappy ones?

I know for a fact they are,

Hmmmmm.... I have been wanting to replace my Turbo XS for another 3" system.

I was just thinking earlier today that I would like to see an exhaust with tips to match the shroud shape - at least this matches the line of the valence. I like it!

+1 :suspect:
curious as to how loud it is in person compared to say TurboXS or maybe more like RB

Looks nice but there's nothing listed for it on their website. How much is it going to cost?

OMG it's Shiny. The wife will want this now. :(

Ultra bump !

I'm actually hesitating between that milltek/Pettit catback and the traditionnal Racing beat's one.

My car is pretty "loud", lots and lots of mods on it but NA, my actual exhaust line is knight sports header, BHR midpipe ( wich has a little leak or two imo, "rasping" as i think you US guys say ) and a random no name catback i bought to a friend but i really need to change now.

I will use the car most of time on trackdays, i need to keep the sound as low as possible ( but i will stay catless ), i guess the RB catback is more quiet than the Milltek's ont when i hear at videos, but if ever somebody here heard it ou even owns that milltek product, i would be very glad to get the advice on it, the RB one is allready installed on hundreds of RX8, would be nice to get something else in my mind, but as i say, is it really way louder than the RB catback or is the difference not that big ?

I wouldn't get kicked off trackdays cause my car's is too much noisy hey ! :D Thank you guys, sorry for my english.

most UK tracks have a limit of 102 or 105dB

Some of the really stupid ones have a 98db level (which I think is ridiculous)

The full Pettit system peaks at about 99dB if you include the hi flow section.

I had your Pm, ty again. ^^

As i said, tracks in france are limited at 95 db for the most, and testing conditions are totally ridiculous most of time... :spew: