Magnaflow Performance Exhaust RX-8
#1
Registered
Thread Starter
Join Date: Aug 2003
Location: Irvine, Ca
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Magnaflow Performance Exhaust RX-8
Magnaflow Performance Exhaust RX-8
Picked up my car this morning from the Magnaflow Performance Exhaust facility to find a nice new exhaust system on my car. The car was used for prototyping their exhaust and everything turned out great. Included are a few pictures I took of the car after the exhaust was installed. The sound is very nice and rumbles perfectly and the look of the exhaust is sharp. I dont have dyno sheets for the car yet, they should be up in a few weeks but looking at the charts for my A/T RX-8 we saw about 6 wheel HP @ peak and 3lb-ft of torque additional over stock.
More about the RX8 exhaust, it features a 100% Stainless Steel construction. Fast flowing 2.5" mandrel bent polished 400 series Stainless Steel tube, dual 4x9x14" polished 400 series Stainless Steel mufflers, and two double wall 4" polished 300 series Stainless Steel tips. The vehicle has a very distinct but not disruptive exhaust note (characteristic of most Magnaflow mufflers) while marinating very comfortable drivable interior sound level.
The larger photos follow, I will post additional pictures in the daylight and outdoors shortly. Hope everyone enjoys!
Picked up my car this morning from the Magnaflow Performance Exhaust facility to find a nice new exhaust system on my car. The car was used for prototyping their exhaust and everything turned out great. Included are a few pictures I took of the car after the exhaust was installed. The sound is very nice and rumbles perfectly and the look of the exhaust is sharp. I dont have dyno sheets for the car yet, they should be up in a few weeks but looking at the charts for my A/T RX-8 we saw about 6 wheel HP @ peak and 3lb-ft of torque additional over stock.
More about the RX8 exhaust, it features a 100% Stainless Steel construction. Fast flowing 2.5" mandrel bent polished 400 series Stainless Steel tube, dual 4x9x14" polished 400 series Stainless Steel mufflers, and two double wall 4" polished 300 series Stainless Steel tips. The vehicle has a very distinct but not disruptive exhaust note (characteristic of most Magnaflow mufflers) while marinating very comfortable drivable interior sound level.
The larger photos follow, I will post additional pictures in the daylight and outdoors shortly. Hope everyone enjoys!
#11
Moderator with a mycocardium
Originally posted by Omicron
From these pictures, it looks just like the Borla. Do you have a shot of the muffler can(s) themselves? Thanks...
From these pictures, it looks just like the Borla. Do you have a shot of the muffler can(s) themselves? Thanks...
#13
Registered User
Join Date: Jul 2003
Location: So Cal
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Ive seen the borla and the one thing this exhaust does not have is those little rolled up edges that collect crud at the tip of the exhaust which is a very nice bonus.
The only concern i have is since the tips are huge. Will they melt the sorrounding plastic? I would think they would especially if one gets canzoomered. That would not be good IMHO.
The design of the tip looks clean and very nice, much much much better than the magnaflow rsx exhaust.
If no plastic is melted i give em 2 snaps up in a z formation :D
The only concern i have is since the tips are huge. Will they melt the sorrounding plastic? I would think they would especially if one gets canzoomered. That would not be good IMHO.
The design of the tip looks clean and very nice, much much much better than the magnaflow rsx exhaust.
If no plastic is melted i give em 2 snaps up in a z formation :D
#14
Registered
Thread Starter
Join Date: Aug 2003
Location: Irvine, Ca
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
zerohour the tips are far enough out that it shouldnt melt anything above it. I asked about something else and they said the tips were the way they were so it wouldnt melt the plastic.
Mangaflow puts sound files and video clips on their site of the exhaust systems. I'll see if I can get a hold of some sound clips, but it may be a few weeks
Mangaflow puts sound files and video clips on their site of the exhaust systems. I'll see if I can get a hold of some sound clips, but it may be a few weeks
Last edited by z00m-z00m; 03-26-2004 at 08:14 PM.
#17
i've had magnaflow's put on my other car...so one of my buddies...his was places so that u can't see the tip out so well...i had my exhaust out a lil bit more..with the same concern that it would melt my bumper....well...i had mine out for about 2 years with no problem...my buddy on the other hand....his back bumper melted a bit......
#18
Registered
Thread Starter
Join Date: Aug 2003
Location: Irvine, Ca
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
LiquidChick, ouch for your buddy! Glad yours is doing alright! My tips you can see well it sticks out far enough where I dont think any melting will happen. So far it hasnt gotten anything hot on the bumper. Ill keep checking after my long drives too But the engineering guy was damn sure id be alright and he knew his stuff
#19
it "WAS" doing alright...i hit a 450-500 lb black bear and totalled the car...:o that's how i got my rx-8 :p
Originally posted by z00m-z00m
LiquidChick, ouch for your buddy! Glad yours is doing alright! My tips you can see well it sticks out far enough where I dont think any melting will happen. So far it hasnt gotten anything hot on the bumper. Ill keep checking after my long drives too But the engineering guy was damn sure id be alright and he knew his stuff
LiquidChick, ouch for your buddy! Glad yours is doing alright! My tips you can see well it sticks out far enough where I dont think any melting will happen. So far it hasnt gotten anything hot on the bumper. Ill keep checking after my long drives too But the engineering guy was damn sure id be alright and he knew his stuff
#20
Registered
Thread Starter
Join Date: Aug 2003
Location: Irvine, Ca
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
LiquidChick, ouch who got hurt more you or the bear?
Alright im trying to get audio of the exhaust hopefully middle of this week Ill have something decent but all my recording devices (little to none) suck at input!
Alright im trying to get audio of the exhaust hopefully middle of this week Ill have something decent but all my recording devices (little to none) suck at input!
#21
hmmm well..the bear died...and no one knows how i'm alive...i still get the "hey yogi..i think i'm bleeding" jokes....i have pics..but i'm afraid if i post em...they'll be too big...
#25
zoom-zoom brought his car into our dealership so I had the chance to see and hear the Magnaflow exhaust in person. I like it. It looks great the size of the tips are perfect. It is not a loud noise at idle either which is nice and it has a very nice growl at higher loads. I am going to look more into it when it comes available.