Holy shit, i'm glad someone revived this thread and you posted that. i've had the coils/wires/ Pigtails for like months and just been too lazy to make a bracket. Going to get on this now though

thanks!

Where can you pick up the coil connection kit if you want to piece this together as well? I was given a brand new set of ls2 coils and won't have to buy any of them so I think piecing together will be the least expensive route

Where can you buy anything on earth? eBay of course. Lol

@ linuxadickt -- First you SN is GREAT!!! Now on to your find do you know if it will fit the stock location? Either way man what a great find I will be picking on up for my LS2 kit!! Nice work!! I wish I could give Thumbs up!

Hey Sebarx8, where did you get these? did you make them?

I've built my own ignition wires before using MSD parts, that's easy. A quick eBay search didn't turn up a cheap source of those coil plugs though (ignitor/ecu side). :/

Here they are.

LS2 Yukon Ignition Coils to RX8 Harness Adapter | eBay
I used them with D514 coils and wires of a 05-07 Ford F150 V6. The wires you can shorten if you are handy with flat blade screwdriver and crimps. Still have them in a sloppy row zip held together with allthread and zip tied in place. No hot start issues, and worked fine with stock dwell. Hope that helps somebody.

May I have this info aswell.looking to order

Google is your friend.

Has anyone used this bracket?

Google is not reliable nor has google bulit a rx8 but thanks for that useful information

The 2nd post on this page tells you exactly what parts you need. Use google to find the lowest price for said parts. A little reading goes a long way.

where can i find these D585s, there expensive as hell for authentic AC Delco, 75-119 bucks a piece. im scared to do the swap if im gonna have to spend 400 bucks to replace coils in the future. Are the benifits really worth the expense? if so, how?

Just buy the BHR kit and you won't have to replace them in the future.

A DIY kit is very close to the price of a BHR kit, and the BHR kit uses the right coils, is plug and play, and has excellent customer service.

BHR uses a D585 derivative coil. Just buying a set of D585 coils will NOT get you the same thing, as they aren't ideal for use with the RX-8

Yeah I was wordering where you ordered the premade wires and the RX8 to LS2 harness?

Posted already, read up the page.

What do you mean exactly when you say they are "derivative"? I thought they were the same?

I can give you a great deal on the Brooklyn Bridge too

I can't seem to find what I am looking for so I figured this would be a good place to ask, does anyone have a wiring diagram for the actual harness between the rx8 ignition harness and wiring up the ls2 connectors?

Posted From RX8Club.com Android App

as attached, note the position of the "tab" as shown on both the connector layout and coil itself

and in response to the deleted post by another member, why do I need the specs of any particular smart coil when it can be tested directly? Aftermarket specs being different than OE is nothing new, quite common actually. The real key is modifying the dwell map properly, even on those particular coils as I've done many times.

And adjusting dwell is from good edu management such as adaptronic and microtech? Or will even just a Cobb do? And thanks for the diagrams btw team

Posted From RX8Club.com Android App

alright so I have been looking and I cannot seem to get the wiring right. I got the ground hooked to the battery, but as the order of wires into the order of the pugs on the harness of the car I cannot get it to fire. any help of the full wiring harness for the d585 coil would be appreciated.

Posted From RX8Club.com Android App

Probably should have pointed out that you can't assume that the A - B - C positions on the RX8 wiring diagram match the coil. You should have compared the wire color positions on the wiring harness coil connector and wired accordingly. All of the B position wires are solid black (B) and all of the C position wires are black/white (B/W) and the A position wire color varies by the coil position due to that being the signal wire to fire the coil. I'd recommend running the new common ground either to the battery post or to a ground point connected to the battery post.

Also would recommend buying the harness on ebay for $100. Its a quality piece, better than any of the kit harnesses I've seen ...

Cool I see what you mean I will look at that when I get home from work. Do you happen to know a link to where I can buy the male plugs that plug into the harness on the car? I can't find them anywhere.

Posted From RX8Club.com Android App

Please confirm with them before ordering

Home » Shop » Connectors / Harnesses » Sumitomo » 3 Way Receptacle pigtail for Japanese coils & sensors

Or here

Connector Experts Pigtails and Connectors