I recently ordered a racing beat midpipe and now im waiting for it to come in. Im curious to know if should order any other parts or do any other work since ill be working under the car. Ex. high performance hangers from RR or new gaskets.

 

I needed new hardware with my Agency Power one. I don't know about the Racing Beat one.

 

might want some gaskets to avoid exhaust leaks

 

The below thread might be of some help.

https://www.rx8club.com/series-i-do-yourself-forum-73/diy-racing-beat-resonated-midpipe-install-194450/

 

Ya I figured gaskets would be a good idea. And I've read the DIY thread. Ill be using it once the pipe comes in

 

Some RTV could help too. I reused my gaskets, and I don't think I have a leak. I'll have to take a peek under the car to see if there is any soot at the joints.

 

rb midpipe comes with the right gaskets

 

The RB will come with the manifold ring gasket not the exhaust donut.

 

I took my cat off today and im going have to order a donut. Cheap insurance if you ask me

 

I purchased a donut from RB for ~$16. Alot cheaper then OEM and of similar quality.