ease of installing B&B?
06-03-2004, 11:34 PM
#1
Registered User
Thread Starter
Join Date: Dec 2003
Location: Arkansas
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
ease of installing B&B?
How difficult would it be for someone without a lift to install the B&B exhaust? How much room would I need under the car to work? Would just a set of ramps work?
06-04-2004, 03:19 PM
#7
Registered User
Join Date: Jun 2004
Location: Soldotna, Alaska
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
I just installed B&B on mine and it's about the loudest thing in town. I ditched the caddy and used their race pipe as well. Do you have to worry about emissions where you are at?
06-04-2004, 06:18 PM
#8
Registered User
Thread Starter
Join Date: Dec 2003
Location: Arkansas
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
I said screw it and had it done by professionals. They had a hard time with the rubber hangers also. This thing sounds great! Emissions is no problem in Arkansas.
06-04-2004, 08:57 PM
#9
Registered
Join Date: Jan 2004
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
hey if you have lyk pb blaster or some wd 40, spray it on the hangers and just use a long flat head screwdriver to pry it off..it should come off easy..thaz what i did with my borla too..
06-07-2004, 09:05 AM
#10
Guest
Posts: n/a
Easiest way to get one off the hangers is to lube them (WD40, cooking oil, whatever) and use a pair of channel locks. Just put one end on the end of the metal rod attached to the exhaust, the other on the opposite end of the rubber hanger and squeeze.
Thread
Thread Starter
Forum
Replies
Last Post
jasonrxeight
RX-8's For Sale/Wanted
2
09-30-2015 01:53 PM
Learners_Permit
Series I Interior, Audio, and Electronics
8
09-27-2015 07:38 PM
Evan Gray
Series I Trouble Shooting
0
09-26-2015 12:30 PM
