donald121

Blitz Supercharged kits! :D

mikeb

any more info
like price,hp , any when it comes to US

ILOVERX8

It will release in Japan at 2 quarter of 2004

Peak whp 215.2ps
peak torque 24.6kgm

you can adjust 3 level of boost

Dookie_Rx-8

so its a super chager

donald121

2nd quarter means spring, rite?
It says it will release on spring of 2004.

ILOVERX8

Yes, spring time. I would guess it will cost at least $3.5k

Spin9k

Any website URL info? I searched, couldn't read much on JP site, found no mention of RX-8 or supercharger. No info on US site either. Where did you get pic and info?

Also ILOVERX8, can you repost focused ??? slip, either that or am going (more) blind!

Love to get on info mailing list. Thanks.

donald121

I got the ads from a japanese magazine called Option. It's just an ads. There is no article or any additional info in the magazine. I guess we all have to wait until spring.

murix

Why so little power? We can make that for a lot less money and without forced induction. I hope it makes more than that.

I do not know the exact conversion for torque, but I know that is around 200lbs-ft. Can someone convert this properly?

I would be interested to know the specs. This seems to be tuned on the seriously safe side.

Speed Racer

That converts to:

212.3 Hp
177.9 ft-lb

Its definitely better than stock but not quite what I expected for forced induction.

WTF no turbo

Yea 212hp is a very safe tune i would imagine.Ive seen 210ish jap dynos N/A.

Jt-Imports

This is the same info I posted 3-4 months ago? Either way I can added to it.

Spring--Is true..

Price---closer to $4k

HP---Not much, still finishing it up COMPLETLY to see what it can do.

JimW

To much dough for not enough go!

zoom44

developed on a JDM rx-8 i assume? so how do they adjust for our "cat-longevity" tune?

epitrochoid

think i could get a high res scan of that pic..it'd make a sweet wallpaper

Spinny 3ngls

I believe the major reason we are never going to see big gains from FI is due to the 10:1 compression ratio which traditionally is too high to be safe for FI. Most of what I have read etc.. suggests a ratio of 8-8.5:1 is much more boost friendly. sorry to disappoint.

ILOVERX8

Greddy Turbo charger

ILOVERX8

dyno graph

ILOVERX8

donald121

:p ILOVERX8, great job!!!

4fcn121

so anyone have any idea if mazdaspeed is going to put a turbo in their cars soon

Japan8

The turbo article says max power output of about 265ps over the normal 210ps. 50ps gain in the 6000rpm and 7000rpm range.

This ain't for us guys.... maybe the auto guys if the torque converter can take it. Check out the redline on the graph (where the power falls off)... this is the 210hp base engine in the auto and 5spd in Japan.

Couldn't get anything off the Options scan. I'll see if I can drop by the store tonight and pickup a couple car mags.

JSE RX-8

mazdaspeed is working on a supercharger that will produce a 40% increase in HP over the stock numbers.

Japan8

But will it be available as an aftermarket bolt-on with factory warranty intact or will it be part of the MS RX-8 only? What's the cost going to be like? When is it going to come out?

This is the information we need now...

MrWigggles

Press the "flower" button on you camera.

The best thing about the Blitz kit is that it appears that the low torque increase is phenomenal.

If those curves are accurate there is a 42% increase in power at 4000 RPM going from 70 KW to 100 KW (about 95hp to 134hp) That's a lot more passing power without having to drop to a lower gear.

From other articles I have read that it is clutch driven, that worries me a little because it means one more thing to break down.

Hopefully Canzoomer can work support for an FI system into one of his future stages. Maybe a 50%+ increase over all RPMs. <drool...>

Anyway, thanks for the pics.

-Mr. Wigggles