Blinder M20 & Mazdaspeed Front Bumper
#1
Blonde Bastard
Thread Starter
Blinder M20 & Mazdaspeed Front Bumper
has anyone installed their blinder M20 on a mazdapseed front buper? If so how did you do it? I currently have mine on my car after cutting into the plastic mesh on the stock front but it doesnt look like thats an option with the mazdaspeed front. Any suggestions?
#2
do you have any pictures of what this might look like, (the blinder) i could go outside my shop right now, but im wondering if you might be able to install it where the black plastic goes across the bumper pad.
#3
Blonde Bastard
Thread Starter
you can see the blinder here ... http://www.radarbusters.com/products...er/default.asp
Right now I have it mounted in the black vent area on my stock bumper currently. If you look at the front of my car in the pic below, you can see the 2 sensors mounted to the left and right of the licence plate...
https://www.rx8club.com/attachment.p...chmentid=91160
Fyi its in the upper left and upper right portion of the black area. You cant see the passenger side but you can see it on the drivers side. Its the little shiney black thing peeking out
Right now I have it mounted in the black vent area on my stock bumper currently. If you look at the front of my car in the pic below, you can see the 2 sensors mounted to the left and right of the licence plate...
https://www.rx8club.com/attachment.p...chmentid=91160
Fyi its in the upper left and upper right portion of the black area. You cant see the passenger side but you can see it on the drivers side. Its the little shiney black thing peeking out
Thread
Thread Starter
Forum
Replies
Last Post
LMURailsplitter02
New Member Forum
1
09-06-2015 10:56 PM
projectr13b
Series I Do It Yourself Forum
1
09-06-2015 01:04 PM