AxialFlow shifter giveaway
 

There are about 30 shifters left from the last run and we will be making a new run as soon as they are gone. The bad news is that the next batch will have new pricing of $20.00 more. We have not raised the price in three years and there are of course increases in cost.
In order to get these off the shelf we are offering to include a cylinder brace for free. Just an extra S&H charge of $20. So for the price of the next run you get a brace for nothing. There are only two red ones left the rest are blue. All the shifters in this deal have the new bushings in the third polymer design. This material is similar to the striping they use in drag race blowers.
So far it has proven bullitproof.
There is no provision on the website yet so contact me direct for these deals.

By the way of the 10 RX8's running in pro racing series 7 use our shifters. We didn't give them away either, they all bought them. The other 3 will come around when they find out about it.

The '09 will use a new gearbox and we are on top of that too.

awesome deal Richard! I'm sure these will go quickly.
If I didn't already have your shifter, I would be ALL over this...

PMed...

I apologize if this is common knowledge but what is the difference between red and blue?

well, it all starts with reflecting and absorbing specific components of the visible electromagnetic spectrum... :lol:

wait....so how much are they going for?...i already got one but my cousin wants to pick one up....^and is that really the answer for the difference between red and blue?

The brace is billit aluminum and anodized in color. In this case we have blue and red left. You might look up the axialflow thread in the wheels tires and brakes section. Or our website axialflow.com
Or click on our footer ad.

Thanks RP, just Paypal'd ya...

What's the upgraded bushing you speak of? Is that the cup on the bottom of the STS?

If we have one of your older shifters, is there any benefit to having the new polymer bushing like on current production run? If so, can we get them swapped out?

You just made it under the wire. Going out in todays shipment leaving in 10 min.

When we run the next batch of shifters there will be extra bushings for anyone who needs them. All replacments will be with the new parts.

The racers are testing them now so give it a couple of weeks.

PM'd! :)

So you're giving away cylinder braces with the purchase of a shortshifter...

I don't think I can stress enough how absolutely fundamental these two parts are to the well being of an RX-8 owner.
There are precious few mods one can perform that produce such instant gratification as these two.

man, 4 girls 1 tub ,, your starting to slack MM

great deal.

nice to see you around richard!

and i am also wondering about the new bushing. is it an update from the yellow kevlar one as mine just started making noise.

if so i would like to order one if i could.

beers :beer:

Very small tub

so the bushing is the bottom cup?

I uninstalled my STS because the few people who had the cup break, also all needed new transmissions immediately after. Granted, I've only read three people having had this issue, so it doesn't seem widespread and I don't want to alarm the other readers - but I didn't want to take the risk when mazda recently gave me a brand new tranny due to the 4th gear syncros dying. They aren't going to be happy if I come in a year later needing another one.

If the cup is revised, I would be interested in getting my sts upgraded and I would love to reinstall it. The STS is a huge improvement over stock.

Quality over quantity.

damn it Jeff, you're going to make me spend MORE money...

I'd be interested in buying a revised 'cup', if you could let me know the price & availability.......


S

This is really some of the best money spent.
Seriously.
You should have tried it in my car when I was there last.
Be sure to check it out next week.

PM sent. Damn you and your good deals. I don't need to be spending this money. :)

are the cups you guys talking about the lower bushing that mazdatrix has an aluminum version of? cus I have the yellow version from you richard, and it is starting to make a bit of noise, but I didn't really cared about it that much

if I may ask, how much will the upgrade to that be?

I'm getting alot of requests for the new bushing. I should just keep my mouth shut. Anyway those of you that want it can have one when they are available. If you have a failure it will be replaced with the new material. If you just want one because they are available then you will have to install it yourself. We fix all our shifters for free but changing parts for no reason is not included in that policy.
The next run of shifters will be in about 3 weeks. We will not have extra bushings until then. The new bushings are being abused right now by the racers. We need to see how they live. If they make it a few hours in a race car then they will live until your grandkids go to collage in your street car.

Also I'm getting bombarded with people who want only the shifter at a discount. I'm hurt you guys don't want my brace, it is a very good addition to your car. It works. Anyway in order to keep things fair I will offer these same batch of shifters to you for $250 shipping included. This is still only until this batch is sold.

I want the brace too! I PM'd you...waiting for further instructions. ;)

richard.

i think you get us wrong. mine is getting a bit loud, but as far as i am concerned it is a wear item. i dont expect a new one for free.

you product is great, you support is perfect.. if they want to beat you down in price dont sell to them..

the short shifter is the quickest selling at a high price used item on this forum..

beers :beer:

Not usually my style, but:

+ 1 billion.

Damn fanboyz are everywhere! :banghead:

J/K................I totally agree. :)

you still around you old fart!?:)
olddragger

could you paint your car before you sell it? and i have a secret! or two!

beers :beer:

paypal'd, thanks Richard!

--Jonathan

pmed

13 left and going fast.:)

Payment sent - looking forward to getting that bad boy installed.

If anyone in Socal wants to do the deal for the shifter+brace for cost+$20S/H I'll gladly pay the extra $20 for the brace! Let me know!

Or Richard, perhaps you can let one go for a cheaper price ;)
Just kidding, kind of :O

Pm'd...(I forgot to mention I'd prefer the blue brace)

6 shifters left. Only one red brace left everything will be blue after that.

man they are flying off your shelves RP

Noooooo, won't make it until Wednesday!

Richard I'm in for the blue set...
 

I'll PM you for details/instructions.

PM'd
 

Hi Richard.... PM'd you... hope there is one left!

Payment sent
 

Richard...I just sent the payment.... looking forward to installing this after reading so many good reviews.

All gone. :Eyecrazy: The last orders will go out today.
Thanks guys, now to order some material for more.
It'll be about three weeks until next batch is ready to ship.

SHIT

im too late.

i've wanted both for so long. :( how did i miss this? im the forums multiple times a day... :(

Pays to hit "New Posts" at least once or twice during each section, just to see what's going on.
That and leaving the lounge to Caveney. :)

Got my SS today thanks RP for the speedy delivery and great service... A++

:'(:'(:'( 33 more hours and I would have ordered

was I in with the last orders? Can't wait to get it....!

No, your's went out Saturday. You should have it tomorrow.