3" midpipe
#1
My Goodness My Guinness
Thread Starter
Join Date: Aug 2005
Location: The OC, Maryland
Posts: 547
Likes: 0
Received 0 Likes
on
0 Posts
3" midpipe
i kept trying to search but it kept refusing the "3" " so i give up. does anyone sell a 3" midpipe that will bolt up to the stock catback and possibly a aftermarket catback later? if so can i have a link?
#2
mine's better
Join Date: Sep 2005
Location: Aiken, SC
Posts: 808
Likes: 0
Received 0 Likes
on
0 Posts
http://rx7.com/store/rx8/rx8exhaust.html#supercat
second item on the page....is this what youre lookin for?
second item on the page....is this what youre lookin for?
#7
RX7store.net
#11
The only downside to the 3" midpipe is that you have to carefully stretch the factory braided "doughnut" to fit the pipe but it was worth it. I used a standard exhaust pipe stretcher.
CRH
CRH
#18
When you remove your factory midpipe/cat, the end with the two nuts/studs that fits in the "cat-back" portion will have a braided stainless steel "doughnut" that seals the two pipes together. This doughnut will need to be retained. However, because the factory exhaust at that point is about 2.5" it will need to be slightly stretched to fit the new midpipe. Pics? Nope. It's a pretty easy operation and the pipe stretcher is available at the parts shop. Or, if you are friendly with the local exhaust shop they may stretch it a bit for you.
CRH
CRH
#21
Team, is that a recent change they made? I got my pipe from RP two years ago and I had to open up the doughnut. Either way, getting rid of the cat is one of the more effective ways to get more power out of our engines.
CRH
CRH
#22
No respecter of malarkey
iTrader: (25)
It came with a group of parts I bought used, you can see that donut tube extension is smaller than the main 3" tube, it measured 2.5" OD, I never installed it and am assuming the donut just slid on, maybe I'm wrong ...
Last edited by TeamRX8; 02-25-2006 at 12:37 PM.
#23
Boost needed
Join Date: Dec 2003
Location: San Jose, CA
Posts: 2,557
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TeamRX8
It came with a group of parts I bought used, you can see that donut tube extension is smaller than the main 3" tube, it measured 2.5" OD, I never installed it and am assuming the donut just slid on, maybe I'm wrong ...
yea the donut just slids on to that part of the midpipe.
#25
mine's better
Join Date: Sep 2005
Location: Aiken, SC
Posts: 808
Likes: 0
Received 0 Likes
on
0 Posts
I've got the racing beat catback. when I look for a midpipe, do i need to plan on stretching the donut? Or is there no longer any donut... also, since the RB intermediate pipe is 3 inches, what is the effect of having the RP midpipe that reduces down to 2.5"? Sorry bout the thread jack, just a relevant question, i think...