|
Midpipe and Highflo cat pricing
We finally have finished our exhaust parts for the RX-8. Here is a breakdown of what we have.
3 inch stainless steel Midpipe. http://www.rx7store.net/product_p/rx...%20midpipe.htm 3 inch stainless steel resonated midpipe http://www.rx7store.net/product_p/rx...%20midpipe.htm 3 inch stainless steel high flow cat http://www.rx7store.net/product_p/rx...flow%20cat.htm Thanks Jason |
Good to hear Jason.
What is the difference b/w a "midpipe" and a "resonated midpipe"? Will there be a significant change in the loudness? How would it work with the new M-Speed Sport Exhaust? I would assume then also that by adding the midpipe and the high flow cat to a freer flowing exhaust, that hp/ torque would increase? |
Originally Posted by Jason
We finally have finished our exhaust parts for the RX-8. Here is a breakdown of what we have.
3 inch stainless steel Midpipe. $199 3 inch stainless steel resonated midpipe $280 3 inch stainless steel high flow cat $345 Each system comes with bolt and gaskets and has a bung for the 02 sensor, so no need for 02 simulator. I will have pictures shortly but these look like all the other ones on the market. For the first few customers I will discount these items so I can get some feedback. If interested in these please call or send me an email jason@rx7store.net Thanks Jason Email sent |
email sent last nite. :yumyum:
|
Originally Posted by success07
Good to hear Jason.
What is the difference b/w a "midpipe" and a "resonated midpipe"? Will there be a significant change in the loudness? How would it work with the new M-Speed Sport Exhaust? I would assume then also that by adding the midpipe and the high flow cat to a freer flowing exhaust, that hp/ torque would increase? Jason |
Originally Posted by Jason
We finally have finished our exhaust parts for the RX-8. Here is a breakdown of what we have.
3 inch stainless steel Midpipe. $199 3 inch stainless steel resonated midpipe $280 3 inch stainless steel high flow cat $345 Each system comes with bolt and gaskets and has a bung for the 02 sensor, so no need for 02 simulator. I will have pictures shortly but these look like all the other ones on the market. For the first few customers I will discount these items so I can get some feedback. If interested in these please call or send me an email jason@rx7store.net Thanks Jason |
As long as the 02 sensor is plugged in you shouldnt.
Jason |
I've got a B&B midpipe and muffler. Your high flow cat should bolt up if I wanted to change out my midpipe right?
|
Im responding to all emails sent.
Thanks Jason |
Originally Posted by AKBen
I've got a B&B midpipe and muffler. Your high flow cat should bolt up if I wanted to change out my midpipe right?
Jason |
what's there to stop the PCM from giving a CEL if there's no cat?
also could i get one with an extra bung for an EGT sensor already welded? |
im in for the 3 inch stainless steel Midpipe. $199***
***only if it is compatible with greddy exhaust. ***no cel would come out ...
Originally Posted by Jason
As long as the 02 sensor is plugged in you shouldnt.
Jason you dont know or is not going to give a cel... any testing on this midpipe dyno...etc etc... or video how loud it is... i will really appreciate any feedback...delivery to 78228 $$$$$$$$ |
Emailed you Jason. I have money waiting and ready to order as soon as you give me the info.
|
Originally Posted by Jason
As long as the 02 sensor is plugged in you shouldnt.
Jason beers |
Some RX-8's have not thrown a CEL when the cat has been removed. Those seem to be the exception rather than the rule tho...
|
I will respond to all emails by tomorrow morning and try to get some pic up in the next day.
I will keep the discount on these open for another day. I have at least 15 people that are interested. Jason |
Jason, is the RX8 Store cat-back 3" and has it always been sold this way or did it used to have a smaller diameter?
Is there a major sound increase with this new 3" hi-flow cat? Is the resonated mid-pipe quieter than the hi-flow cat? Do you have any before and after dyno results of the hi-flow cat? |
Originally Posted by ALXVA8
Jason, is the RX8 Store cat-back 3" and has it always been sold this way or did it used to have a smaller diameter?
Is there a major sound increase with this new 3" hi-flow cat? Is the resonated mid-pipe quieter than the hi-flow cat? Do you have any before and after dyno results of the hi-flow cat? Jason |
Originally Posted by Jason
Our exhaust has always been 3 inch. The high flow cat will be a little louder than the stock cat and not much of a difference in sound from the high flo to the resonated. No dyno graphs yet.
|
Called Jason at rx7store yesterday and ordered mine! Can't wait to get it, once it arrives I'll take pics if none have been posted yet.
Thanks Jason, very excited! It will go nicely with the catback you make, can't wait to get both on :mdrmed: |
Very interested, pending audio
|
Originally Posted by Jason
I will respond to all emails by tomorrow morning and try to get some pic up in the next day.
I will keep the discount on these open for another day. I have at least 15 people that are interested. Jason PICS, specs????? beers |
Sorry for the delay on the pics. Im waiting on my shipment of these that I hope will be here this week.
Jason |
I just can't wait to get it :)
It is the last piece of my exhaust puzzle, and I'll finally be able to install everything at once. Jason and rx7store always seem to put out good stuff, at least from my perspective, so I'm quite excited. |
Originally Posted by dDuB
I just can't wait to get it :)
It is the last piece of my exhaust puzzle, and I'll finally be able to install everything at once. Jason and rx7store always seem to put out good stuff, at least from my perspective, so I'm quite excited. |
I got the resonated midpipe. Dunno about hangers, but that's an easy fit so I didn't care enough to ask.
|
Im getting desperate here... i want the midpipe ... and im planning on getting k&n intake but im worried about getting CEL any one has a fix to this or EXPERIENCE
|
I read something on an evo forum, I think, about extending the O2 sensor bung so the O2 sensor sits out farther. This in essence takes it out of the direct exhaust stream and fix the CEL problem since it wont be reading as much unburnt fuel.
|
dDub, how's it looking?
|
Haven't received it. Last post from Jason in this thread said he was still waiting on them from the people making them, and then he'd be sending them out. I'm in no rush, I paid early to secure the GB price and to get it quicker :D
|
Good news. I will have these tomorrow and post some pictures.
Jason |
Sweet, does that mean all the "group buy" or early/special order people or whatever will have theirs shipped out next week?
|
does anyone know what the stock cat weighs? How much is this new one?
|
Well, dDuB, seeing that you put your order in and especially seeing that Jason should have these units in hand today pushed me to also put an order in today. I went for the high flow cat. I already have the RX-8 Store cat-back.
|
Cool, I was wondering what the high flow cat version of the pipe would sound like versus the resonated/no-cat pipe. I also have the rx8store catback, though it is not on yet. I'm doing all the exhaust at once.
|
I'm interested too. I've got the Midpipe with resonator from Canzoomer but took it off because I got sick of the loud rasp and CEL from the cat delete pipe. I would so love to be able to put my exhaust back on and run the Canzoomer again. This should bolt right in place right?
|
High flow Cat
I am also intrested in the high flow cat, what is the weight and sound difference? I Have a borla cat back, will it bolt right up? Thanks
|
3 inch stainless steel high flow cat $345
is this a rx8club price? does this include shipping? does this include the resinator? |
I now have pricing and pictures on the site. Here are the links.
Racing Midpipe: http://www.rx7store.net/product_p/rx...%20midpipe.htm Racing Midpipe with resonator: http://www.rx7store.net/product_p/rx...%20midpipe.htm High flow cat midpipe: http://www.rx7store.net/product_p/rx...flow%20cat.htm Jason www.rx8store.net |
Looks good, can't wait :D
|
will your high-flow cat pass emissions and void my warranty? :D:
|
Good question. We have not done any emission testing on our cat. Im sure we will have some results soon.
Jason |
Originally Posted by Jason
Good question. We have not done any emission testing on our cat. Im sure we will have some results soon.
Jason what about some video and DYNO GHAPH... |
Jason-
I'm interested in the high-flow cat... a few questions though... Do they have metallic or ceramic elements? Are they meant specifically for rotaries (i.e. can handle the excess heat over time)? Does your price include gasket and bolts? Thanks!! |
Originally Posted by G8rboy
Jason-
I'm interested in the high-flow cat... a few questions though... Do they have metallic or ceramic elements? Are they meant specifically for rotaries (i.e. can handle the excess heat over time)? Does your price include gasket and bolts? Thanks!! Price does not include gaskets and bolts. You should be able to reuse the stock gaskets. Jason |
Originally Posted by dova
what about some video and DYNO GHAPH...
Jason |
Originally Posted by Jason
Our cat is metallic and the whole high flow system weights in at 11 lbs.
Price does not include gaskets and bolts. You should be able to reuse the stock gaskets. Jason |
The cat we use on our RX7 systems is made of the same material and we have never had any issues with it. We have been selling those for years.
Jason |
Originally Posted by Jason
The cat we use on our RX7 systems is made of the same material and we have never had any issues with it. We have been selling those for years.
Jason That's what I wanted to hear... once I get my 8 tuned and running leaner I don't want a $350 melted cat as a paperweight :) Thanks |
Is it me or is that price for a high flow cat pretty good?
By the way, what #'s are high flow cat's giving? I thought I heard 8-10HP....am I right? Jason, are you planing on getting it emission tested? I'm not in an area that does that kind of stuff but I was just wondering. |
| All times are GMT -5. The time now is 01:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands