2005 Velocity Red Rx8
 

Hello,

I have a very very good garage kept velocity red RX 8 with less than 50 miles Brand New Turblown Turbo kit that was hand built by Elliot.

Attachment 233769

Attachment 233770

Attachment 233771

Attachment 233772

http://i728.photobucket.com/albums/w...9/IMG_1345.jpg

Attachment 233773

Attachment 233774

Attachment 233775

Attachment 233776

Attachment 233777

Attachment 233778

Attachment 233779

Attachment 233780


I want to sell this car fo $10,000. If you ask why I am selling the car so cheap. The turbo kit itself with adaptronic ECU cost near $9000. The car is running but we ran into engine issue during tuning. The engine compression wasn't good as we kept tuning the car. The engine has esmeril seals but somehow it seems the seal buckled during the tuning when engine got very hot during high load runs. There were no detonation during tuning. Engine may have low comresson to begin with and it magified the issue during tuning. My wife is expecting and I have no business in spending money on the car and it is best that I sell it as is.

Note: The oil pressure gauge and Innovate O2 sensor wasn't hook up at the time of the photograph.

Here is what car has:

Mazdamart high flow fuel pump
Agency power pulley
Mazdaspeed light weight fly wheel
Axle flow short shifter
Wedsport rims
Bridgestone RE50 tires 245/50 17in dia
Whiteline front/rear sway bars
Konig shocks/racing beat springs
Mazdaspeed front/rear stut tower braces
Snowperformance methanal injection
Turblown Turbo kit with precision 6265 turbo (saw 3 psi at 3200 rpm!)
Garrette intercooler
Mazdaspeed front bumper
Battery is relocated to the trunk
HKS Hi power exhaust
Mazsport duel resonatd mid pipe
Prosport boost/fuel pressure gauge
Innovate LC1 WB

Lots of stock parts that I kept in boxes in garage.

Car is drivable but will need engine work. It starts on its first crank every time. If you have skill and time to work on engine. All it takes is tuning the car and it ready to go.

I have new priority in life and I have to sell it.

PM me if you are interested. I am located in MN.

since you mentioned it---it would help a lot if you could post up some compression numbers or at least some vacum readings?

Vacuum reading at cold engine is around -18 to20.

Once engine warm it drops to -12 to -15 or so.

Car still running and starting on 1st crank.

thats not bad.

Who built the motor?

Christ of Esmeril built it. He is a friend of mine live near me.

Ah ok. That sucks. Well if you decide to part out let me know.

I want to sell the car, not pieces of it. Car needs more tuning and someone with good knowledge of engine can get it to runs properly. I do not have tme or money to work on the car anymore.

Attachment 233526

Attachment 233527

Attachment 233528

Attachment 233529

Price reduce to $9000