Best product to treat black plastic exterior trim/vents?
#1
Laid back in the pocket
Thread Starter
Join Date: Mar 2006
Location: Blacksburg, VA
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
Best product to treat black plastic exterior trim/vents?
I've searched and only found two popular options: Mothers Back to Black, and 303 Aerospace Protectant. I don't want to use the Back to Black because you have to buff it off and that would be a huge PITA to use on the side vents. Don't know anything about 303 brand products.
My side vents and all exterior trim are not looking so hot, any advice?
My side vents and all exterior trim are not looking so hot, any advice?
#4
i use 303 for the interior.
back to black is really awesome stuff - but i would only use it on the exterior plastic bits (it works on plastic even if it's not black). I wouldn't use it on stuff I'd be touching with my hands on a regular basis.
back to black is really awesome stuff - but i would only use it on the exterior plastic bits (it works on plastic even if it's not black). I wouldn't use it on stuff I'd be touching with my hands on a regular basis.
#6
Guest
Posts: n/a
I use Aero 303 all the time, it’s good stuff.
This link will highlight some uses http://properautocare.com/303auti.html
I use 303 on all plastic trim parts, inside and out of the car, i.e. side vents, the plastic cowling up by the windshield wipers, back bumper, front grill, side mirrors, weather seals on the doors, most of the interior, (except seats, I use Zaino Z-10 for them) and the tires.
It’s easy to apply and easy to clean up.
This link will highlight some uses http://properautocare.com/303auti.html
I use 303 on all plastic trim parts, inside and out of the car, i.e. side vents, the plastic cowling up by the windshield wipers, back bumper, front grill, side mirrors, weather seals on the doors, most of the interior, (except seats, I use Zaino Z-10 for them) and the tires.
It’s easy to apply and easy to clean up.
#7
Laid back in the pocket
Thread Starter
Join Date: Mar 2006
Location: Blacksburg, VA
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the tips.
What is the application process like for the 303? Do you have to buff it off of the exterior pieces? How might you use it on the side vents?
What is the application process like for the 303? Do you have to buff it off of the exterior pieces? How might you use it on the side vents?
#8
Purveyor of fine bass
I don't like Mother's Back to Black and advise against it because it leaves white residue when it wears off (on my 8 it did) and it is very runny, so you get runs everywhere.
I much prefer Poorboy's Trim Restorer, which looks nice and isn't runny and leaves no white residue.
I do like 303 as well, but I only use it on the interior once in a while.
I much prefer Poorboy's Trim Restorer, which looks nice and isn't runny and leaves no white residue.
I do like 303 as well, but I only use it on the interior once in a while.
#10
Purveyor of fine bass
I don't think so, as I remember seeing it on textured areas far from the paint, but I could be wrong. I really should try B2B one more time to see if the same thing happens.
#12
Administrator
iTrader: (7)
Meguira's NXT spray is really good
#13
Guest
Posts: n/a
I usually spray onto a cloth (to prevent over spray) and then wipe the areas I want to protect; use the dry portion of the cloth to clean up any residue.
For my vents, I spray 303 right on one, let it soak while go spray the other one, come back, wipe it clean. I’ll do the same with the front grill. It’s easier to get in between the mesh by spraying than using a cloth.
Good luck!
#14
Registered
Join Date: Jan 2007
Location: SF Bay Area, CA
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
I use aerospace 303 on the interior and exterior trim. Works great and does an excellent job of maintaining the exterior trim color as well as protect the interior plastics.
I ended up ordering mine online at amazon.com. Like others, I spray the 303 on a cloth and wipe the surface with the cloth rather than spray directly onto the surface.
I ended up ordering mine online at amazon.com. Like others, I spray the 303 on a cloth and wipe the surface with the cloth rather than spray directly onto the surface.
#16
Dial P for Phantom
iTrader: (1)
Join Date: Jun 2007
Location: East Central Florida
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
I never buffed out any "back to black", bumpers and all that look amazing all the time. Only issue is when it runs from under the side mirrors down onto the door it gets all hazy on the door and it takes a lot of rubbing to get it off, hopefully not hurting the wax/clearcoat.
#17
Registered
Thanks for the above info. I've been wondering what to use on the black plastic exterior parts, like the front and rear valances. My rear valance is a little oxidized.
Will any of the above products help with that oxidation? I'm hoping to avoid any sort of buffing or vigorous application - that plastic is a little textured, isn't it?
Will any of the above products help with that oxidation? I'm hoping to avoid any sort of buffing or vigorous application - that plastic is a little textured, isn't it?
#18
Purveyor of fine bass
My favorite is Poorboy's Trim Restorer. But try Mother's Back to Black, just watch out for the runny liquid.
If you keep applying either of the above products, it will keep the plastic trim black longer. It kinda "conditions" the plastic.
Yeah, you can't really buff the plastic. But with those products, there's no vigorous application required. Just swipe it on.
If you keep applying either of the above products, it will keep the plastic trim black longer. It kinda "conditions" the plastic.
Yeah, you can't really buff the plastic. But with those products, there's no vigorous application required. Just swipe it on.
#19
Thanks for the above info. I've been wondering what to use on the black plastic exterior parts, like the front and rear valances. My rear valance is a little oxidized.
Will any of the above products help with that oxidation? I'm hoping to avoid any sort of buffing or vigorous application - that plastic is a little textured, isn't it?
Will any of the above products help with that oxidation? I'm hoping to avoid any sort of buffing or vigorous application - that plastic is a little textured, isn't it?
#21
Black Wow.............
Start reading at about post #47
Start reading at about post #47
#22
Black Wow.............
Start reading at about post #47
Start reading at about post #47
Black wow is by far the best trim product out there right now.
#25
I recently used the Back to Black. Pretty good stuff IMO. A little runny, but overall pretty easy to work with and pretty good results. Made the grayish sunbeaten exterior plastic black again.