thats good to know
|
A fellow racer let me borrow a Speedway front sway bar that he's not using. Going to clean it up and get new end links for it after I make sure the fitment is good. I forgot what a pain it was to remove the front sway bar. The bar is 1.25" diameter and .19" thick. I'll also need to relocate the brake line a little and the brake duct hose.
https://cimg7.ibsrv.net/gimg/www.rx8...410d45ac3b.jpg https://cimg0.ibsrv.net/gimg/www.rx8...77a2695554.jpg https://cimg3.ibsrv.net/gimg/www.rx8...9197c41d27.jpg https://cimg6.ibsrv.net/gimg/www.rx8...f1c79bdf32.jpg |
Looks like maybe you had the Progress front bar on it previously? That has 0.25” wall thickness on it. So you may need to adjust to the stiffer end link holes to get the balance back or possibly change to the 0.25” bar.
|
you're right, my old bar is Progress .25" thick. i'll look into getting Speedway .25" bar after i do some testing with this one.
|
Got the motor freshened up over the winter at Rotor Piston Motorsports in Maryland. They are an hour drive from my house, so it's convenient to get to. Also got side clearance on the rotors and Dynamic balance done.
https://cimg8.ibsrv.net/gimg/www.rx8...f566e4bdbd.jpg https://cimg3.ibsrv.net/gimg/www.rx8...b72968e73d.jpg https://cimg0.ibsrv.net/gimg/www.rx8...e38bcb685e.jpg https://cimg5.ibsrv.net/gimg/www.rx8...7437dff137.jpg https://cimg7.ibsrv.net/gimg/www.rx8...97f6c337cd.jpg https://cimg5.ibsrv.net/gimg/www.rx8...e2d4c6ed78.jpg |
Got BHR new plug and play coils after TeamRx8 mentioned them to me. 5 years warranty is pretty sweet for a race part.
https://cimg0.ibsrv.net/gimg/www.rx8...eb0d3e1a98.jpg https://cimg0.ibsrv.net/gimg/www.rx8...da08accc0d.jpg |
Got the car dyno after putting 300 street miles on the rebuilt engine.
Here's the difference between unrestricted and detuned for NASA ST5 class. My submission for NASA ST5 is 196 Average WHP. this dyno did make about 5 whp lower than the one at the track. So I had to make some adjustment to the tune at the track. https://cimg2.ibsrv.net/gimg/www.rx8...509e4aac87.jpg |
it's been awhile since I did anything new to the car. Last week I installed the new Koyo S2 radiator. It's significantly thicker than the S1 radiator and also 2.8 lbs heavier. Installation was pretty straight forward with the exception of modifying two mounting tabs on the passenger side.
https://cimg9.ibsrv.net/gimg/www.rx8...0f4abc7c65.jpg https://cimg0.ibsrv.net/gimg/www.rx8...922668e361.jpg you can see the passenger slide bottom mounting tab doesn't line up https://cimg8.ibsrv.net/gimg/www.rx8...6e75e593df.jpg so i filled in the hole and weld additional material to the side and drill a new hole. i didnt want to cut the tab off and move it because im not comfortable welding aluminum yet and didnt want to burn a hole in the radiator. https://cimg7.ibsrv.net/gimg/www.rx8...9c709991df.jpg https://cimg8.ibsrv.net/gimg/www.rx8...bbb2d5e3e9.jpg for the upper passenger side, i made a bracket and bolted that to the fan shroud. pretty simple. https://cimg8.ibsrv.net/gimg/www.rx8...f498cf9fa2.jpg https://cimg0.ibsrv.net/gimg/www.rx8...50036c0253.jpg fan shroud completed mounted. https://cimg1.ibsrv.net/gimg/www.rx8...396c98bb00.jpg |
looks good, but kind of surprised you’d still be running the OE fan setup
|
Originally Posted by TeamRX8
(Post 4941527)
looks good, but kind of surprised you’d still be running the OE fan setup
|
not just that, imo the OE fan shroud inhibits airflow
|
Originally Posted by TeamRX8
(Post 4941540)
not just that, imo the OE fan shroud inhibits airflow
|
Originally Posted by trackjunkie
(Post 4941547)
True, I haven't thought about that. they just release this video.
https://www.youtube.com/watch?v=TAO6FwLdNAw missed your video update revision, been trying to tell people this for what; 6 or 7 years, at least? Particularly the “block-in the radiator with foam blockheads” that just can’t get it through their thick skulls. The differential pressure comparison difference tells the tale why that’s unnecessary for people who think things through properly. Maybe you forgot asking me about it a few years ago: https://www.rx8club.com/rx-8-racing-...3/#post4897932 . |
new personal best at VIR, 2:07.8
|
had a fun race at NJMP Lightning last month.
|
Spicy start to that first race! S2K looked like he wanted to run away early, but you weren't gonna let that happen :cool:
|
Originally Posted by sharingan 19
(Post 4948588)
Spicy start to that first race! S2K looked like he wanted to run away early, but you weren't gonna let that happen :cool:
|
Enjoyed that. That S2000 was aggressive. Watching these makes me miss my car so much.
|
had a some really fun races at PittRace this past weekend. Won race #1, second place in race #2 and won race #3.
|
All times are GMT -5. The time now is 03:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands